ADM Fine Machining Limited - Phase 2

Equipment Available as Surplus to Requirements of the Business. Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item.

Ended: 14th March 2018 15:00

LOT 1
DMG MORI NMV3000DCG 5 Axis Milling Center (April 2014). 12,000 Rpm. 34 Pallet Stacker with Fanuc F31 iA5 Control
Table dia. 350mm X 500mm Y 350mm Z 510mm Table Load 100Kg Max , Spindle Nose 40 Taper With 120 Tool Positions ATC. Serial No V30ID131202
Sale has ended
LOT 2A
Samchully Power Chuck HCH-18 'As New'
3-Jaw open-center chuck, also comes with 3 sets on new jaws.
Sale has ended
LOT 2
DOOSAN PUMA 400MB (October 2012) Heavy Duty Turning Centre/CNC Lathe. With Fanuc Series 32i Control
Max swing over bed 770mm. Max swing over saddle 590mm. Max turning length 978mm. 30kw main spindle. C axis with driven tools 7.5kw rotary tool. 12 Position turret. Tool setter. Programmable travel tailstock. 380mm 3 jaw chuck. Serial No.ML0...
Sale has ended
LOT 3
DOOSAN PUMA 400MB (2011) Heavy Duty Turning Centre/CNC Lathe. With Fanuc Series 32i Control
Max swing over bed 770mm. Max swing over saddle 590mm. Max turning length 978mm. 30kw main spindle. C axis with driven tools 7.5kw rotary tool. 12 position turret. Tool setter. Programmable travel tailstock. 380mm 3 jaw chuck. Serial No.ML0...
Sale has ended
LOT 4
DOOSAN PUMA 3100 (December 2010) CNC Lathe. With Fanuc i Series Control.
Max turning dia. 525mm. Max turning length 760mm. 22kw main spindle. 10 Position turret. Tool setter. Programmable travel tailstock. 315mm 3 jaw chuck. Serial No.ML0130-004424. Spindle on: approx. 6,209 hours.
Sale has ended
LOT 5
DOOSAN PUMA 2600M (October 2010) CNC Lathe With Fanuc i Series Control . Multifeed Bar Feeder
Max swing over bed 780mm. Max turning dia. 376mm . Max machining length 760mm. Spindle power 22Kw. Spindle speed 45-3500 Tr/min. Chuck size: 254mm. Serial No P2600M0035. Spindle on: approx. 4,212 hours.
Sale has ended
LOT 6
DOOSAN DNM 650 (August 2010) Vertical Machining Centre With 4th Axis. Fanuc I Series Control
Table 1300 X 670mm.X 1270mm Y 670mm Z 625mm.Spindle Speed 12,000 Rpm. Spindle motor 15/18Kw Spindle nose tooling BT40 with 30 tool ATC . With Kitagawa NC Roatry table (2010) . Serial No DNM6500262. Spindle on: approx. 927 hours. Run Ti...
Sale has ended
LOT 7
DOOSAN DNM400 (May 2012) Vertical Machining Centre With Fanuc I Series Control
Table size 920 X 435mm X 635mm Y 435mm Z 510mm. Max table load 600Kg. Spindle power 15Kw. Max spindle speed 12,000Rpm. Spindle nose tooling BT40 with 30 ATC. Serial No MV0009-001483.
Sale has ended
LOT 8
HURCO VMX42SR 5 Axis Milling Center With Hurco Winmax Control (2011)
Table size 1270 X 610mm. X 1067mm Y 610mm Z 610mm. Max table load 500Kg Spindle speed max 12,000Rpm. 20 bar High pressure through coolant. Spindle probe. Mechanical tooling probe. 40 tool ATC.
Sale has ended
LOT 9a
DOOSAN DNM 650 (October 2011) Vertical Machining Centre With 4th Axis. Fanuc I Series Control
Table 1300 X 670mm.X 1270mm Y 670mm Z 625mm.Spindle Speed 12,000 Rpm. Spindle motor 15/18Kw Spindle nose tooling BT40 with 30 tool ATC . With Kitagawa NC Roatry table (2010) . Serial No DNM6500262. Spindle on: approx. 927 hours. Run Ti...
Sale has ended
LOT 9
KIA SUPER KIA TURN 21 LMS 4 Axis CNC Turning Center (Late December 2004). Control: Fanuc Oi-TB
Number of Axis: 4 Max Swing: 548mm. Max Turning Dia.: 350mm. Main Spindle Speed: 4,000 RPM. Sub Spindle Speed: 6,000 RPM. Main Spindle Motor: 15 HP. Sub Spindle Motor: 5 HP. Bar Capacity: 65mm Chuck Size - Main Spindle: 203mm Chuck Size - S...
Sale has ended
LOT 10
Eppinger Driven Tooling Head With Through Coolant will fit Lots 2 & 3 - Puma 400MB
Axial Mill and Drill Head.
Sale has ended
LOT 11
Eppinger Driven Tooling Head will fit Lots 2 & 3 - Puma 400MB
Radial Mill and Drill Head
Sale has ended
LOT 12
Driven Tooling Head With Through Coolant will fit Lots 2 & 3 - Puma 400MB
Axial Mill and Drill Head
Sale has ended
LOT 13
Driven Tooling Head will fit Lots 2 & 3 - Puma 400MB
Radial Mill and Drill Head
Sale has ended
LOT 14
Eppinger Driven Tooling Head will fit Lots 2 & 3 - Puma 400MB
Radial Mill and Drill Head
Sale has ended
LOT 15
Driven Tooling Head will fit Lots 2 & 3 - Puma 400MB
Axial Mill and Drill Head
Sale has ended
LOT 16
Driven Tooling Head will fit Lots 2 & 3 - Puma 400MB
Axial Mill and Drill Head
Sale has ended
LOT 17
Eppinger Driven Tooling Head will fit Lots 2 & 3 - Puma 400MB
Axial Mill and Drill Head
Sale has ended
LOT 18
Eppinger Preci Flex Kit
Sale has ended
LOT 19
Driven Tooling Head will fit Lot 5 - Puma 2600M
Axial Mill and Drill Head
Sale has ended
LOT 20
Eppinger Driven Tooling Head will fit Lot 5 - Puma 2600M
Axial Mill and Drill Head
Sale has ended
LOT 21
Eppinger Driven Tooling Head will fit Lot 5 - Puma 2600M
Radial Mill and Drill Head
Sale has ended
LOT 22
Eppinger Driven Tooling Head will fit Lot 5 - Puma 2600M
Radial Mill and Drill Head
Sale has ended
LOT 23
Driven Tooling Head will fit Lot 5 - Puma 2600M
Radial Mill and Drill Head
Sale has ended
LOT 24
Driven Tooling Head will fit Lot 5 - Puma 2600M
Radial Mill and Drill Head
Sale has ended
LOT 25
Driven Tooling Head will fit Lot 5 - Puma 2600M
Axial Mill and Drill Head
Sale has ended
LOT 26
Eppinger Driven Tooling Head will fit Lot 5 - Puma 2600M
Axial Mill and Drill Head
Sale has ended