A.G.A. (Belgium)

Table Diameter 5000mm. Max Diameter Swing 5300mm. Fitted With Two Swivelling Ram Slides.Max Height under Cross Rail 3500mm.Speed Range 0.32 -32.4 rpm.Travel of Ram Slides 1600mm. S/No 12007-6 (1960) Note: Seller will allow extension on coll...

Bed Area 7000mm x 3200mm. Max Stroke of Ram 1550mm. Max Dist.Between Columns 3900mm. S/No 9471 (1981) Note: Seller will allow extension on collection time for this lot

Table Size 8000m x 3000mm.Max Distance between Uprights 3300mm. Max. Height Under Cross Rail 3200mm.60 Int. Spindle Taper. Power of Milling Motor 44Kw. Note: Seller will allow extension on collection time for this lot

Distance Between Centres 6000mm.Centre Height 490 mm.Power Travel to tailstock.630mm Dia. 4 Jaw Chuck. Note: Seller will allow extension on collection time for this lot

Longitudinal Travel of Spindle 6500mm. Vertical Travel of Spindle 3500mm. Spindle Cross Travel 1100mm.Spindle Speeds 2.35 - 850 rpm. Spindle Taper 7MT.S/No.43786 (1963) Note: Seller will allow extension on collection time for this lot

Centre Height 500mm. Distance Between Centres 6250mm.Spindle Bore 310mm.Spindle Speeds 4.5 - 180 rpm. 2 Axis Newall DRO.S/No. 143 (1987)

Centre Height 615mm. Distance Between Centres 7000mm.1200mm Dia. 4 Jaw chuck. S/No.29803 (1957) N.B. Damage to Slide Near Chuck Inspection Recommended

Centre Height 575mm.Distance Between Centres 6000mm.1000mm Dia. 4 Jaw Chuck.Single Point Quick Change Toolpost.3 Point Steady.

Twin Welding Heads.Two Miller 800amp Power Sources.Max Distance Between Chucks 3000mm.Max Diameter 1000mm.WAMS D2 Trak Control.Two 400mm Dia. 3 Jaw Chucks.

Table Dia.1400mm.Table Speeds 3.15 - 225 rpm.Max Height Under Cross Rail 1475mm.Stroke of Ram Slide 935mm.S/No.7114 - OJ (1964)

Table Size 1800mm x 2200mm.Spindle Dia.130mm.Spindle Taper 50Int. Spindle Vertical Traverse 1400mm. Table Cross Travel 2200mm.Table Long Travel1800mm.

Centre Height 350mm. Distance Between Centres 3000mm.Spindle Speeds 9 - 1800 rpm. Powered 3 Jaw Chuck 300mm Dia.S/No.69609

Radius of Arm 4720mm (10') Taper in Spindle 4MT.Spindle Speeds 31 - 835 rpm. Bed Area 3000mm x 1300mm. S/No.P27589 (1962)

S/No.0919 (1992)

Wheel Dia.350mm x 310mm Wide. Distance Between Roller Centres 1700mm.Pendant Control.S/No.1535

Table Size 2000mm x 2000mm. Cross & Long Travel 800mm. Height from Floor 740mm

Drill Head Travel 750mm. Table Size 1100mm x 900mm

Overall Dimension 12000mm x 7400mm.10 Plates Approx 4500mm x 2400mm x 300mm Thick. 5 Plates Approx 5000mm x 1500mm x 300mm Thick

Table Size 1200mm x 1200mm. Motorised. Tilting & Swivelling. Vari Speed

Safmatic 1000 TR Power Source.Arm Travel:- Cross 5000mm. Vertical 5000mm.

Electric Motor Driven.30KW Motor . Max Pressure 8 Bar. S/No.664579

Electric Motor Driven.45KW Motor . Max Pressure 8 Bar.

Table Size 3000mm x 800mm.Spindle Taper 50 Int.Table Travel 3000mm.Cross Travel of Head 800mm.Vertical Head Travel 850mm. S/No.14055 (1988) N.B. Hydraulic System Requires Attention

With310mm Dia. 3 Jaw Chuck.Distance Between Centres 2500mm. Centre Height 220mm. S/No.6502

Max Width Through Frame 1000mm.Ram Stroke 200mm.S/No.1231 (1961)

.

Max Width Through Frame 2000mm.Ram Stroke 200mm.

Mounted on Air Receiver. 10 HP Motor

With Siemens Coros OP15 Control.Stroke 350mm.Table Size 1000mm x 480 mm.Fitted with 600mm Dia. Rotary table.S/No. H7615

Table Dia.800mm.Motorised. S/No.6995

Wheel Dia.350mm x 310mm Wide. Distance Between Roller Centres 1700mm. Pendant Control. S/No.1543

Wheel Dia.300mm x 200mm Wide. Distance Between Roller Centres 1300mm.

Wheel Dia.490mm x 175mm Wide. Distance Between Roller Centres 600mm.

Powered Rotation and Cross Travel.5 Tonne Abus Electric Hoist.Span 7000mm.Height 4500mm Approx

Wheel Dia.400mm.S/No.7597

Centre Height 245mm. Distance Between Centres 2500mm.3 Jaw Chuck 250mm Dia. Single Point Quick Change Toolpost.Spindle Speeds 10 - 800 rpm. S/No.821.6520.24.9277

Throat Distance 380mm.Table Size 550mm x 550mm N.B. Blade Welder Missing

With Agie Plus Control.Table Size 320mm x 200mm.Approx Tank Size 450mm x 240mm x 180mm Deep.S/No.53006 (1972)

Centre Height 250mm. Distance Between Centres 1750mm.4 Jaw Chuck 500mm Dia.4 way Toolpost.Spindle Speeds 20 - 2000 rpm. S/No.45006 (1964)

Tank size 1000mm x 700mm x 500mm Deep Approx.S/No.103469 (2001) Sound Booth Partioning Dismantled and Palletised

Size of Table 3000mm x 1500mm x 350mm Thick. Height from Floor 960mm. S/No.3696 (1991)

Variable Speed

S/No.82347

Mitreing.Approx Blade Dia.350mm

With Lincoln Ideal Arc DC 1000 Power Source.Arm Travel:- Cross 3000mm Vertical 3000mm

S/No.1010060992. No Leads

S/No.7486442060. No Leads

S/No.0017230037. No Leads

S/No.7040500985. No Leads

S/No.7465484877. No Leads

S/No.7047070002. No Leads

S/No.47434. No Leads

Brush Width 2000mm. S/No.G740037806 (2007)

Electric Powered

Table Size 200mm x 200mm. S/No.56514

Table Dia. 230mm each

.

Capacity 10 - 50 - 100 Kn. S/No.273 (1973)

Dimensions 760mm x 750mm x 1080mm High. No Contents

Dimensions 760mm x 750mm x 1080mm High. No Contents

Faceplate Dia. 225 mm. S/No.204460

Faceplate Dia. 250 mm. S/No.508322

Faceplate Dia. 1000 mm. S/No.2005

Faceplate Dia. 450 mm. S/No.863

Dimensions 1400 mm x 1010 mm x 4000mm High each Approx.

Dimensions 1000 mm x 1000 mm x 1980 mm High each Approx.

Dimensions 1150 mm x 810 mm x 845 mm High each Approx.

Dimensions 900 mm x 600 mm x 500 mm High each Approx.

Dimensions 900 mm x 800 mm x 940 mm High Approx.

Dimensions 1550mm x 1020 mm x 650 mm High Approx.

Dimensions 1550mm x 1020 mm x 650 mm High Approx.

Dimensions 1550mm x 1020 mm x 650 mm High Approx.

Dimensions 1550mm x 1020 mm x 650 mm High Approx.

Mounted on Metal Stands. Table Size 2800mm x 1120mm x 630mm Thick. Height from Floor 630mm

3500mm x 1100mm x 210mm Thick

Dimensions 1550 mm x 1140 mm x 800 mm High each Approx.

Table Size 3730mm x 1040mm x 200mm Thick (Approx) N.B. Tables are concreted in floor buyer to remove.

Table Size 3730mm x 1040mm x 200mm Thick (Approx). N.B. Tables are concreted in floor buyer to remove.

Table Size 8300mm x 2440mm. N.B. Table is concreted in floor buyer to remove.

No Contents. Dimensions 760mm x700mm x 1120mm High Approx.

No Contents. Dimensions 760mm x700mm x 1120mm High Approx.

No Contents. Dimensions 760mm x700mm x 1120mm High Approx.

No Contents. Dimensions 760mm x700mm x 1120mm High Approx.

No Contents. Dimensions 760mm x700mm x 1120mm High Approx.

Including Contents :- Carbide Inserts.Turning Tools. Dimensions 760mm x700mm x 1120mm High Approx.

Including Contents :- HSS Milling Cutters. Dimensions 760mm x700mm x 1120mm High Approx.

50 Int.Spindle Tooling and HSS Milling Cutters.Dimensions 930mm x 470mm x 970mm High Approx.

50 Int. Spindle Tooling and Morse Taper Shank Tooling

500mm and 400mm Diameter Approx

Each 400mm Diameter Approx

Two x 320mm and One 250mm Diameter Approx

320mm and 200mm Diameter Approx

Each 400mm Diameter Approx

420mm and 400mm Diameter Approx

Each 320mm Diameter Approx

330 mm Diameter Approx

Double Doors.Approx Int. Dimensions 1500mm x 1500mm x 1700 mm High.85 Amp. S/No. 210859 (1980)

Double Doors Front and Back. Approx. Int. Dimensions 1000 mm x 1000mm x 1500 mm High.65 Amp.S/No.210336 (1978)

Overall Dimensions 2200 mm x 1800 mm x 4200 mm High Approx.

Overall Dimensions 2200 mm x 1800 mm x 4200 mm High Approx.

1500 mm Diameter

800 mm Diameter

Approx 1140mm x 515mm x1155mm each

.

.

.

.

.

.

.

.

.

.

200mm Jaw Width

200mm Jaw Width

With Contents of Carbide Insert Turning Tools. Overall Dim. 760mm x 700mm x 750mm High Aprox.

Metric. N.B. Does not include Toolcupboards

50 Int. Spindle Taper. Power Draw Bar.Power Feed to Spindle.Spindle Stroke 150mm.

.

Each 450mm x 480mm x 500mm Approx.

Overall Dimension 9000mm x 6500mm. Each 5000mm x 1500mm. N.B. Plates are concreted in floor buyer to remove.

Untested

Untested

Untested

Untested

Untested

S/No. 95667000004 (2001)