Automech Machine Tools (Abu Dhabi & Dubai) - Day 2

Admit between centers 15,500mm, Centre height 1000mm, Swing over Bed 2000 mm, Bed Width 1260mm. NOTE - This machine is located in Dubai.

X Axis Travel 5800mm, Y Axis Travel 1500mm, Z Axis Travel 2800mm, Table Length 6500mm, Table Width 2500mm, Serial No 141, Year of manufacture 2006. NOTE - This machine is located in Dubai.

X-Axis Travel 2000mm, Y-Axis Travel 850mm, Z –Axis Travel 1250mm, Table Length 2200mm, Table Width 820mm, Serial no fs-356. NOTE - This machine is located in Dubai.

Maximum Rolling Thickness 50mm (Minimum diameter= 5 x Top roll diameter), Maximum rolling length 3050 mm, Top roller diameter 620 mm, Bottom rollers diameter 450mm, Main motor power : 70kw

Table Size 12000 X 1000 mm, X Travel 10000 mm, Y Travel 1000 mm, Z Travel 1000 mm. Serial No : 330 All Dimensions are given approximately and no Binding

Working length 6000mm, Capacity 4000kn (400 Ton)

Table Size 10000 X 1200 mm, X Travel 8000 mm, Y Travel 1100 mm, Z Travel 1060 mm. All Dimensions are given approximately and no Binding

Working Length 3000 mm, Maximum Sheet Thickness 20mm in Dia 3000mm, Maximum Sheet Thickness 16mm in Dia 520mm, Pre-bending 16 mm, Top Roll Ø 335 mm, Cone Bending 3000x8mm, Length 5.500 mm, Height 1.700 mm, Width 2.000 mm, Weight 16....

Space Requirements: Length 2000mm/78.7 inch, Width 1150mm/45.3inch, Height 2200mm/86.6mm. Max Cylinder head dimensions: Length No limits, Width 580mm/22.8inch, Height 450mm/19.5mm. Machining Capacity min- max: 28mm to 120mm, 1.1 inch to 4.7...

Shearing Capacity 10mm, Cutting Length 6000mm

Cutting Capacity 12mm, Cutting length 3050mm, Stroke of back gauge 1000mm, Cutting angle adjustment 0.5-3 degree, No of strokes 07-14 / min, Number of plate holders 18, Working height 900mm, Weight 8500kgs, Dimensions L x W x H 4200 x 203...

Pressure 180 ton, Central roll dia 550mm, Side roll dia 500mm, Hydraulic circuit power 20 hp, Capacity leg out 180x180x20mm, Leg in 150x150x18mm, Horizontal 150x40mm, Vertical 420x45mm, Flange out 320mm, Serial no 86237239

Max cross movement of honing box 130mm, Table surface 1450X450mm, Max Table traverse 1500mm, Infinitely variable spindle rotation 32-315rpm, Max spindle torque 82.5mm, Maximum hydraulic pressure 120mm, Electric motor for hydraulic 7.5kw, Co...

Cutting Capacity 26 mm, Cutting length 3000mm

Table Dia 900 mm, Max Turning 1100 mm, Max Working Height 900 mm, Motor 30 kw, Serial no 0706

Cutting Capacity 16 mm, Cutting length 3000mm

Table Dia 800mm, Table to Center Height 1600mm. Hob Cutter Capacity (OD) 110mm, Module up to 10, Serial no 8835

Max Cutting length 3100 mm, Max Cutting thickness 16mm, Motorised back gauge

Table size 1400 x 1400 mm, Longitudinal movement 1850 mm, Spindle Diameter 100mm, Dimension (HxWxL) 2800x3200x5900mm, Serial no 31020

Admit between centers 5000mm, Centre height 550mm, Swing over Bed 1100mm, Serial no 11406

Table Size 1800x300mm, Magnetic Table 1200x300mm, X-Axis Motion 1300mm, Y-Axis Motion 300mm, Dimension(HXWXL) 2150x1800x3400mm, Serial no 9770

Cutting Capacity 16 mm, Cutting length 3000mm

Cutting Capacity 16 mm, Cutting length 3000mm

Machine capacity 150ton, Bed Size Length x Width 1200 x 730 mm, Operation type Pneumatic clutch system

Shearing Capcity 10mm, Cutting Length 3mm, Machine no-4119

Shearing Capcity 15mm, Cutting Length 3mm, Machine no-4114

Cutting Capacity 15 mm, Cutting length 3000mm

Drilling Capacity 100mm,Arm Length 2750mm, Column Height 2250mm, Morse Taper MT6

Cutting Capacity 6 mm, Cutting length 3000mm

Table Size 800x350mm, Working Surface Table 600x350mm, Disc Size 300mm Dia. Dimension (HxWxL) 2400x2000x2550mm, Over all Weight 3000kgs, Serial no 54564

Chuck Dia 20 inch, Tool Post - 1

Max Dia 40mm

Volt: 420 - 50HZ, Serial no 83

Table Size 1300mmx300mm, Dimension (HxWxL) 1900x1800x1900mm, Over all Weight 1300KGS, Serial no 1613

Table size 1250x280 mm, Longitudinal travel (X) 900 mm, Cross travel (Y) 330 mm, Vertical travel (Z) 380 mm, Spindle taper 40 ISO, Spindle speeds 30-1800 rpm, Weight (KGS) 3000KGS

Drilling capacity 50 mm, Morse taper no 4, Spindle to pillar 1100mm, Arm travel on pillar 800mm, Speed range 28-2500/min, Step - 16, Feed 0.063-2 (step-16), Box Table 550x550mm, Useful Bed area Length 1400 mm, Width 760mm, Overall Bed si...

Drilling capacity 50mm, Morse taper no 5, Arm length 1600mm, Total pillar height 2250mm, Arm travel on pillar 750mm, Head travel on arm 1100mm, Speed range 20-1600/min, Speeds-12, Useful Bed area: Length 1250 mm, Width 950mm, Overall Bed s...

Table size 2300x380mm, x-axis traverse 1500mm, y-axis traverse 300mm, z-axis traverse 60mm, motor 66-622 rpm(8 steps), Serial no 34619

Morse taper MT-5, Drilling Capacity 50mm, Column height 2800 mm + motor, Arm Travel 1700 mm

Cutting Capacity 650mm

Drilling capacity 50 mm, Morse taper no 4, Arm length 1400mm, Total pillar height 2000mm, Arm travel on pillar 800mm, Head travel on arm 900mm, Speed range 2 8-250/min, Speed 16. Useful Bed area Length 1400 mm, Width 760mm, Serial no 482....

Drilling capacity 50mm, Morse taper no 5, Arm length 1700mm, Total pillar height 2100mm, Arm travel on pillar 900mm, Head travel on arm 1100mm, Speed range 16-800, 32-1600/min, Speed steps 7, Useful Bed area Length 1450 mm, Width 840mm, Ov...

Drilling capacity 75mm, Morse taper : MT5, Arm length 1600mm, Column height 1500mm, Serial no 30140

Drilling capacity 75mm, Morse Taper MT5, Arm Length 2000mm, Column Height 1800mm

Drilling Capacity 50mm, Morse Taper Mt4, Arm Length 1250mm, Column Height 1200mm, Serial no 626

Morse taper MT5, Drilling capacity 50 mm, Column Height 1400 mm, Arm Length 1800 mm, Serial no 33666

Morse taper MT-4, Drilling Capacity 50mm, Column height 1500 mm, Arm length 1700 mm, Serial no 62109

Cutting Capacity 330mm. Rev 40/57/80/115. Dimension (HxWxL) 1500x1800x1800. Over all Weight 750kgs

Cutting Capacity 4 mm, Cutting length 2000mm

Table Size 1500X355mm

With adjustable angle of bevel: Maximum width of bevel 1" @ 50,000 PSI - mild steel, 3/4" @ 70,000 PSI mild steel. Maximum work piece thickness 2-1/2" thick plate @ 25°, 2-1/4" thick plate @ 55°. Angle of bevel v...

Morse taper MT-5, Drilling Capacity 50mm, Column height 3000 mm + motor, Arm length 3300 mm

Type SS 13. for the grinding of spiral drills made of high-speed steel or solid carbide

Table Size 500mm X 2500mm

Automatic. Cutting Capacity 250mmdia, Blade Size 500x50x2.5mm, Dimension (hxwxl) 1600x1300x2200mm, Over All Weight 1000kgs, Serial no 67129

Admit between centers 1500mm, Centre height 180mm, Swing over Bed 360 mm, Spindle Bore 50mm Dia, Spindle Speed 37-1800 v/min, Dimension (LxWxH) 2950x700x1200mm, Weight( KGS) 2000kgs

Table Size1300X300mm, Serial no 2387

Heat insulated stainless steel tank, Heating elements: 2 changeover 4500 Watts elements, Water level control, Low voltage control circuit, 24 V, 360º electric powered roll-over fixture for easy inspection of all faces, Hydraulic cradl...

Cutting capacity 240mm, Serial no 21214

Maximum cutting capacityRound 8”, Two way, Swivel cutting head, Manual feed by hand, Two Cutting speeds, Motor power 1.9kw, Blade Size 2750x25.4x0.9mm, Serial no 055438

Round bar capacity 200mm, Square bar capacity 200mm

Table size:1400x355mm

table size:2000x46mm, Serial no 96040065

Ram Stroke : 500mm

Drilling capacity 30mm, Spindle Taper MT3 , Table Size 880 x 700mm, Arm Length 780mm, Column Height 1000mm, Spindle speeds 25-2560 rpm

Working table size: 700x1000mm

Working table size: 750x1150mm

Blade Size 1255mm, Serial no 8411

Drilling capacity 40mm Morse taper no MT4. Arm Travel 700mm, Total pillar height 1100mm, Table Travel 1250mm, Serial no 20096

Drilling capacity 40mm, Morse taper no MT4, Arm Travel 750mm, Total pillar height 1000mm, Table Travel 1000mm

Ram Stroke 500mm, Table Size 500x350mm

Capacity 30 ton. Table Size 370x460mm

Capacity 20ton, Table Size: 370x520mm , S/NO:3041066

Capacity 20ton, Table Size 300x480mm, Serial no 50086

Capacity 25ton, Table Size 360x1000mm

Front Sliding table 2500x350mm , Fixed square Table 1000x1000mm

Removable jaws of a Lathe Chuck. Please see Description for more information including sizes.

Head for CNC Lathe Machines and different sizes of turret Holders

4 Jaw Chucks (5 Sizes) 910mm, 635mm, 590mm, 500mm, 660mm. 3 Jaw Chucks - 330mm and 180mm. Used in Conventional Lathe Machines.

Face Plates 700mm and 600mm. Used in Conventional Lathe Machines.

Serial no 90160, Type 17.H.U. Used for reducing the speed of the main drive in various industrial machines.

Centre distance 4000mm, Maximum dia over Bed 560 mm, Swing over tool – 355 mm dia, Main drive motors 17 KW 32 A Delta connection 380 V RPM 1460.