Bartondale Engineering Co Ltd

Traverses:- Long (X) 6300mm. Ram - Cross 970mm. Vertical 1700mm. With Rear Column Support Rail.

Traverses:- Long (X) 4300mm x Ram - Cross 980mm x Vertical 1700mm. With Rear Column Support Rail.

Table 2170mm x 700mm. Traverses: Long 1800mm. Ram cross 1000mm. Vertical 900mm

Capacity Approx:- Max Diameter Swing Over Bed 930mm. Max Distance Between Centres 4000mm. Max Dia Swing in Gap 1200mm. Max Dia Swing over Cross Slide 630mm

Capacity 554mm Dia Swing x 3000mm B.C. Max Dia Swing in Gap 830mm. Max Dia Swing over Cross Slide 370mm.

Spindle Dia 100mm with 50 Int Spindle Nose. Rotary Table 1257mm x 1245mm. Facing Head Dia 600mm.

Table 1930mm x 355mm. Traverses X = 1500mm Y = 580mm Z = 525mm.

Table 1930mm x 355mm. Approx Traverses X = 1500mm Y = 580mm Z = 525mm.

Capacity:- Max Diameter Swing Over Bed 630mm Max Distance Between Centres 2000mm. Spindle Speeds 18 to 1800RPM. Spindle Bore 80mm.

Spindle Dia 127mm (5") with 50 Int Spindle Nose. Top Table 1524mm x 1524mm. Main Table 3048mm x 1524mm. With Cross Slide Outer Supports.

Capacity:- Max Diameter Swing Over Bed 533mm (21") Max Distance Between Centres 3040mm (120"). Spindle Speeds 16 to 1250RPM

Max Dia Swing 400mm x 2000mm B.C. Spindle Speeds 22.4 - 2000 RPM

Table 1250mm x 254mm. Spindle Nose 40 DV with 12 Position ATC.

With Rotary Table - 1524mm (60") Diameter. Adjustable Stroke

Arm Radius 1828mm. Spindle Nose No 5 Morse Taper. With Box Table & Spindle Brake. Speeds 24 to 1210 RPM

Stroke Approx 508mm (20") Distance Between Columns 787mm. Table 610mm x 406mm.

Arm Radius 1350mm. Spindle Nose No 4 Morse Taper. With Spindle Brake

With Rotary Table - 762mm (30") Diameter. Adjustable Stroke

Table 1420mm x 255mm With Power Feed to Long & Cross. Spindle Nose 40 Int

Table Area 457mm x 152mm (18" x 6") Magnetic Chuck 355mm x 150mm

With Solid Tyres. Mast Height 4M

Radius Approx 4M. Pendant Control. Bolted to Floor.

Radius Approx 6M. Height 3.5M. Pendant Control. Concreted into Floor.

Note - Partly Dismantled - Requires Attention

Rolls Diameter Appox 75mm.

Stroke Approx 250mm (10") With Rotary Table - 810mm Diameter. Adjustable Stroke - Requires Attention to Motor Drive & Stroke Adjustment.

Arm Radius 965mm. Spindle Nose No 3 Morse Taper. With Rise & Fall Table, Spindle Brake. Speeds 25 to 1560 RPM. Hand Feed.

Cutting Area Approx 1350mm x 1000mm. Single Head

Max Pressure 10.2 bar

Wheel Size Approx 350mm x 50mm

Single Phase. Receiver Capacity 150 litre

110 Volts

With Extended Adaptor & Drive Shaft Suitable for Lot 10. Could be adapted to fit other boring / milling machines.

Each Approx 1220mm High x 450mm Wide x 450 mm Length of Base

Each Approx 1100mm x 610mm Wide x 840 mm High

Centre Height 175mm

Centre Height 155mm

Centre Height 130mm

Centre Height 150mm

Dimensions Approx 1055mm x 630mm x 1220mm High

Dimensions Approx 755mm x 700mm x 1230mm High

Dimensions Approx 755mm x 700mm x 1120mm High

Dimensions Approx 1010mm x 780mm x 1190mm High

Dimensions Approx 1000mm x 600mm x 925mm High

Sizes - 2 3/4" - 2 11/16" & 2 5/8" Diameter

Lagest Size - 3 1/2" Diameter

Capacity 1/2" - 1 1/8" Dia

Motor 2.2kw. Speed 30M/Sec

Sizes: 1.6"-2" / 2" - 2.4" / 2.4" - 2.8" / 2.8" - 3.2" / 3.2" - 3.6" / 3.6" - 4". With Setting Rings

Sizes: 35 - 40mm / 40 - 50mm / 50 - 60mm / 60 - 70mm plus 0.8" - 1" & 1" - 2"

Range 36" & 40"

Range 16" to 20" & 20" to 24"

Makers: Mitutoyo, Gray & Helios

Including: Gauge Blocks, Height Gauge, Internal & External Micrometers, Bore Gauge etc

Ref 9502

Single Phase

Single Phase

Throat Approx 127mm

Approx Wheel Size 610mm Dia x 45mm Wide

Mounted on Tee Slotted Table 1066mm x 1066mm

Capacity 32mm. Single Phase

With 50V & 80V Tappings Each Side

Requires Attention / Spares or Repair. Capacity Approx 600mm Dia Swing x 1500mm B.C. With 8 Station Turret