Crescent of Cambridge And Others

Year of Manufacture 2001, Control LVD 4C, Back gauge Programmable, Guards Infrared ,Capacity 80 ton x 2500mm, Maximum length of bend 2500mm, Between frames 2050mm, Daylight 400mm, Throat depth 400mm, Stroke length 200mm.

Year of Manufacture 2000, Control BC 45, Back gauge Programmable, Guards Safety Scan Infra-Red, Capacity 135 Ton x 3600mm, Maximum length of bend 3660mm, Between frames 3140mm, Daylight 370mm, Throat depth 250mm, Stroke length 175mm.

Year of Manufacture 1995, Control Trumabend, Back gauge Programmable, Guards Sick, Capacity 85 ton / 86,360 kgs x 2000mm Maximum length of bend 2040mm, Between frames 1750mm, Daylight 380mm Throat depth 410mm, Stroke length 215mm.

Year of Manufacture 1994, Control Delem DA24E, Back gauge Programmable, Guards Sick, Capacity 85 ton / 86,360 kgs x 2000mm ,Maximum length of bend 2040mm, Between frames 1750mm, Daylight 380mm, Throat depth 410mm, Stroke length 215mm.

year of manufacture 1984 , model it2, safety scan infra-red guards and promecam mb control

Year of Manufacture 1996, Maximum working length 2000mm, Maximum material thickness 0.5mm, Roll diameter 40mm, Control system MYLOC 100, Input 415/3/50 ac 0.75 kW, Working speed 4.6 Metres per Minute.

Year of Manufacture 2008, Capacity With Appropriate Rolls Angles (Leg-Out)100mm x 100mm x 10mm, Angles (Leg-In)100mm x 100mm x 10mm, Square 60mm, Flats On Edge 200mm x 35mm, Flats on Flat 125mm x 25mm, Input415/3/50 ac 11 kW, Shaft Diameter...

Capacity With Appropriate Rolls Angles (Leg-Out)75mm x 75mm x 7mm, Angles (Leg-In)60mm x 60mm x 6mm, "T" Section (Leg-Out)70mm x 70mm x 8mm, "T" Section (Leg-In)60mm x 60mm x 7mm, Flats On Edge 200mm x 20mm, Flats on Fla...

Capacity 8' x 18g / 2438mm x 1.24mm, Length of rolls 97" / 2464mm, Roll diameter 4" / 102mm, Roll rise & fall Top Roll 1" / 25mm, Back Roll 4.1/2" / 114mm.

Back gauge Power, Rapid blade adjustment, Work supports 2 @ 48.1/2" / 1232mm, Squaring arms 1 @ 48.1/2" / 1232mm.

Year of Manufacture 1999,Plate Width Up to 600mm, Plate length Unlimited, Sheet thickness 3-25mm, Largest tool diameter 32mm, Sheet weight 100 kgs, X axis stroke 800mm, Y axis stroke 600mm ,Centre distance between punches 70mm.

Capacity Rounds 560mm, Rectangular 560mm x 610mm, Input415/3/50 ac 7.5kW, Speeds 16-85 Metres per Minute, Vice openS 620mm, Stroke of feed vice 400mm, Multi Feed Yes. Fitted withWork Height Sensor, Swarf Screw, Coolant, Power Driven Band Cl...

capacity 360mm diameter

Year of Manufacture 2001, Capacity 27mm Diameter x 13mm Thick or 19mm Diameter x 19mm Thick, Throat depth 130mm.

Table size 1225mm x 845mm, Input415/3/50 ac 2.2 Kw, Actuated via Wander Type Foot Switch.

Base area 40" x 28" / 1016mm x 711mm, Arm rise & fall 22" / 559mm, Head traverse 28" / 711mm, Input 380/420/3/50 ac 1.5 kW, Spindle speeds 86 - 1920 rpm , Spindle bored No.3 Morse Taper, Spindle rise & fall 8&quo...

Table area 16" x 16" / 406mm x 406mm, Table rise & fall 20" / 508mm, Table tilts 90 - 0 - 90 Degrees, Table swivels 360 Degrees, Input 400/3/50 ac 2.2 kW, Spindle speeds 56 - 1000 rpm, Spindle bored No. 4 Morse Taper, Spi...

Capacity 150mm, Belt width 150mm, Input380/3/50 ac 2.2/2.8 kW, Usable flat area 480mm x 150mm.

model HR9, safe working load 215kgs. Untested.

span 12200mm, drop 6300mm approx. untested . Please note crane has been dismantled, and will incur a loading charge of £400 plus vat additional to final hammer price.

span 12160mm, drop 6150mm approx. untested. Please note crane has been dismantled, and will incur a loading charge of £400 plus vat additional to final hammer price.

span 12160 , drop 6150mm aprrox. Untested. Please note crane has been dismantled, and will incur a loading charge of £400 plus vat additional to final hammer price.

span 12200mm, drop 5700mm approx.untested. Please note crane has been dismantled, and will incur a loading charge of £400 plus vat additional to final hammer price.

span 10050mm , drop 5300mm aprox. Untested. Please note crane has been dismantled , and will incur a loading charge of £400 plus vat additional to final hammer price.

span 10050mm , drop 5300mm aprox. Untested. Please note crane has been dismantled , and will incur a loading charge of £400 plus vat additional to final hammer price.

Input 415/3/50, platform area 2600mm x 1600mm.

Model sport di, year 2005, mot till April 2018, mileage 108,000