Deloro Stellite Swindon Ltd

Max Turning Dia 400mm Max Turning Length 150mm. With 260mm Dia 3 Jaw Hydraulic Power Chuck, 12 Station VDI Turret. S/No CS20239

Table 835mm x 360mm. Traverses X = 500mm. Y = 340mm. Z = 520mm. ATC Capacity 16 Tools. Spindle Nose 40BT. S/No 720996

Table 925mm x 380mm. Traverses X = 760mm. Y = 410mm. Z = 450mm. ATC Capacity 20 Tools. Spindle Nose 40BT. S/No 71295

Capacity: Max Dia Swing 630mm x 4000mm B.C. With Swivelling Wheel Head & Work Head. S/No 0279424

Fitted with Through Feed Work Rest, Hydraulic Wheel Dressing Units. S/No 16.42.39.38

Capacity: Max Dia Swing 1020mm x 5000mm B.C. Speeds 5 to 500RPM. Spindle Bore 130mm. S/No 1113

Rotary Table Area 1300mmx 800mm. Spindle Taper 50 Int. Speeds 45 to 2250RPM. Throat Approx 900mm

Capacity: Max Dia Swing 660mm x 3000mm B.C. Speeds 10 to 1250RPM. Spindle Bore 70mm. S/No 1991

Capacity 355mm Dia Swing x 1016mm B.C. (14 x 40") S/No BO78900

Table 1050mm x 330mm. Throat Approx 500mm. Spindle Nose 40 Int with Power Draw Bar. S/No 990313

Capacity 254mm Dia Swing x 1016mm B.C. (10 x 40") S/No 71750

Capacity 254mm Dia Swing x 457mm B.C. (10 x 18") S/No 66704

Rotary Magnetic Table 1066mm. (42") With Coolant / Filtration Unit. S/No E200-103V

Capacity approx 260mm. Auto Feed Stroke 300mm.

Main Lapping Table Diameter 820mm. Rings 350mm Each. S/No 32BTAW-1710

Main Lapping Table Diameter 914mm (36"). 3 off Rings 419mm Each. S/No 38080

Swing over Bed 433mm Dia x 1500mm B.C. Swing over Cross Slide 267mm. S/No 7/0203/16817DD

Capacity 2500mm x 4mm. With Power Back Gauge, Squaring Arm & 2 off Support Arms. S/No 189-1319

Max Capacity 29 Tons - See Photograph of Plate for More Information. S/No 305521 -1985

Capacity 250mm x 6mm. S/No 7381196

Gasses Argon / Hydrogen with Extraction System

With Auto Pay on Unit & Tensioner System

With Double Capstan Draw Block, Pay off & Take Up Unit

S/No 2190

Approx Internal Dimensions 1500mm x 1600mm x 1800 High

Suitable for Lots 23 to 26

Max Pressure 7.5bar. S/No 100008044/0152

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

Max Pressure 7 bar. S/No F082.1265

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

S/No 7038

Table Area 520mm x 380mm. Approx Distance Between Columns 550mm. Quill Feed 127mm. S/No 2035

Single Phase. Approx Internal Dimensions Width 800mm x 500mm Wide x 550mm High. With Dust Extractor. S/No 503497

Approx Internal Dimensions Width 550mm x 400mm Wide x 400mm High. S/No T2X496

Table Area 457mm x 152mm (18" x 6") Magnetic Chuck 450mm x 150mm. S/No 1240111

Table 1066mm x 228mm. Spindle Nose R8. S/No 247220277T

Swing over Bed 390mm Dia x 1270mm B.C. Swing over Cross Slide 240mm. Swing in Gap 580mm. Spindle Bore 54mm. S/No 6/0004/19492

Swing over Bed 330mm Dia x 750mm B.C. Swing over Cross Slide 220mm. Swing in Gap 460mm. S/No 3/0021/01626DD

Swivel Head with 40 Int Spindle Nose Table 1500mm x 325mm with Rapid & Power Feeds to Knee & Power Feed to Quill. S/No 49154

Single Phase. Wheels Approx 250mm Dia x 25mm Wide

Wheels Approx 200mm Dia

Distance Through Frames Approx 500mm

Rise & Fall Table 889mm x 393mm. Spindle Nose No 3 Morse Taper. Throat Approx 190mm. S/No F44978

Blade Approx 110mm. S/No 4519

Table 1066mm x 228mm with Power Long & Cross Feed. Spindle Nose R8. S/No 297650179UX

Throat 150mm. Note Cast Iron Stand is Cracked. See Photograph

Table Area 457mm x 152mm (18" x 6") S/No BO 95732

With Left & Right Centres, Universal Work Head. S/No C5407-8

With Drill Point & Tap Lead Grinding Attachment. S/No M076

Single Phase / Pnuematic

Area Approx 1219mm x 914mm x 762mm High

Table Diameter 1066mm. With Foot Pedal Control. S/No M28043

Size: 2000mm Vertical x 1500mm Horizontal. With Pendant Control

With VR4000 Wire Feed Unit. S/No 13171795

Note Saddle Assembly is Not Available. Machine has been used for Metal Spraying. Capacity 1000mm Diameter Swing x 3000mm B.C. S/No 119-435

Approx Internal Dimensions Width 1300mm x 800mm Wide x 800mm High. With Cyclone Unit & Dust Extractor. S/No 802305

Approx Dimensions 2400mm x 600mm Wide x 500mm Deep. Electrically Heated

Approx Dimensions 2000mm x 950mm Wide x 1000mm Deep. Electrically Heated

6kw. Approx Internal Dimensions 750mm x 1400mm x 550mm High. S/No C2175/57

Throat Approx 380mm. Ram 127mm Diameter. Stroke 304mm. S/No P65142

Fitted Blade Diameter Approx 300mm. S/No 33048099

Length 1325mm. S/No 1182

S/No TGL 73/424

Capacity 300kg. S/No 109628

Tank Capacity 60lts. S/No 17

Requires Attention. S/No 80WS03840

S/No 0452

Internal Dimentions Approx 457mm x 457mm x 457mm

Table 1000mm Diameter. Single Phase

Single Beam Travelling Crane Complete with All Steel Work - Rails & Supports. With Misia 5 Ton Electric Wire Hoist, Pendant Operated. S/No R2289/7 - Untested

With Demag 500 kg Electric Chain Hoist, Pendant Operated. - Untested

Twin Beam Travelling Crane Complete with All Steel Work - Rails & Supports. With Verlinder 5000kg Electric Wire Hoist, Pendant Operated. - Untested

Two off Travelling Cranes One Single Beam & One Twin Beam. Complete with All Steel Work - Rails & Supports. With Verlinder 5000kg & Felco 3000kg Electric Wire Hoists. Pendant Operated. - Untested

Single Beam Travelling Crane. Span Approx 6.5M. With Verlinde 5000kg Electric Chain Hoist, Pendant Operated. - Untested

Single Beam Travelling Crane. Span Approx 6.5M. With Verlinde 5000kg Electric Chain Hoist, Pendant Operated. - Untested

With Manual 5cwt Chain Hoist, - Untested

Single Beam Travelling Crane Complete with All Steel Work - Rails & Supports. With Demag 1 Tonne Electric Chain Hoist, Pendant Operated. - Untested

Single Beam Travelling Crane Complete with All Steel Work - Rails & Supports. With Morris 2 Tonne Electric Wire Hoist, Pendant Operated. - Untested

With Morris 500 kg Electric Chain Hoist, Pendant Operated. - Untested

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

Hoppers Approx 1000mm x 1000mm x 1500mm Deep

With Morris 1000 kg Electric Chain Hoist, Pendant Operated. - Untested

S/No 36641

S/No 24477

S/No 27239 - 1997

S/No's Cannon 10043 & 1200914163

Pnuematic Vice. Disc Diameter 250mm

Range to 500mm. S/No 106.403.106

Screen Diameter 750mm. S/No 1879

S/No 3289

Area Approx 1200mm x 900mm x 150mm Thick & 910mm from Floor

S/No 430113

S/No FTSI-6669

S/No 253635

Used for Crack & Void Detection. S/No 26690

Range: 7"-8", 8"-9", 9"-10", 10"-11" & 11"-12"

Range: 0-1", 1"-2", 2"-3", 3"-4", 4"-5", 5"-6" & 6"-7"

Range from 0 to 12" in 1 inch Increments

Range from 0 to 6" in 1 inch Increments

Range: 150mm - 275mm

Range: 50mm - 150mm

Range: 2"-3" & 3"- 4"

Range 0 - 1". Note One Requires Attention

Range: 0 - 5"

S/No P3519

Throat Approx 6.5"

S/No N5A 000142

S/No 2096

Includes: Bore Gauges, Height Gauge, External & Depth Micrometers, Sine Bar, Internal Micrometers etc. See Photographs

Dimension Approx: 2400mm x 760mm x 835mm High

Dimension Approx: 620mm x 700mm x 760mm High

Dimension Approx: 760mm x 700mm x 1120mm High

Type & S/No S2200-221/1

Dimension Approx: 620mm x 700mm x 750mm High

Dimension Approx: 620mm x 700mm x 750mm High

Approx Dimensions: Plain Angle 230mm x 230mm x 230mm. Box Angles: 230mm x 180mm x 150mm & 235mmx 185mm x 155mm

Max Capacity 125kg. S/No R300-05. Untested

Single Phase - Used in Inspection Room. S/No 9006287-1

Centre Height Approx 127mm. Fitted with 3 Jaw Chuck

Sizes:- 4 Jaw = 305mm Diameter. 3 Jaws = 200mm, 190mm, 125mm & 100mm Diameter 

Dividing Head Centre Height Approx 100mm. Vices: Plain 115mm & 75mm. Record No 23 Quick Release 110mm Wide

Approx Dimensions: Sine Table 180mm x 100mm. Magnetic Chuck 125mm x 60mm

Plus 2 off Toolmakers Vices

S/No 47427

Not Contents

Dimensions Approx 310mm 250mm x 250mm Deep

Single Phase

Single Phase. Dimensions Approx 900mm 700mm x 750mm High

Approx Dimensions: 1800mm x 900mm x 840mm

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011  

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

Beams Approx 5M & 6M Lenghts. With Kone & Morris Electric Chain Hoists. Untested

Beam Approx 2400mm. Untested

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

Beam Approx 4M Long - Used in Product Test Bay

Used in Product Test Bay

Used in Product Test Bay

With Spindle Safety Brake. Throat Approx 250mm. Spindle Nose No 2 Morse Taper. Speeds 51 to 2650RPM. S/No 124066

Magnetic Chuck 400mm Dia. S/No 11

Used in Product Test Bay. S/No 2149-1283

Used in Product Test Bay

Max Span Approx 1800mm. Untested

Max Span Approx 1700mm. Untested

Untested

Untested

Untested

With 2 off Storage Cuboards Under. Approx Dimensions 1828mm x 610mm x 838mm High

Approx Dimensions 914mm x 457mm x 914mm High Each

Approx Dimensions 1500mm x 700mm x 860mm High

Approx Dimensions 1500mm x 700mm x 860mm High

Approx Dimensions 1850mm x 540mm. Each

Approx Dimensions 1800mm x 600mm x 840mm High

Approx Dimensions 1500mm x 700mm x 860mm High

Approx Dimensions 1050mm x 715mm x 850mm High

Approx Dimensions 1500mm x 700mm x 870mm High

Approx Dimensions 1800mm x 600mm x 840mm High

Approx Dimensions 2000mm x 700mm x 840mm High

Some Loose On Pallet & Various Locations. Approx Dimensions 1000mm x 75mm Diameter

Single Phase. Size Approx 150mm Dia x 150 Deep. Single Phase. S/No 1501 - 1997

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011  

Capacity 1450kg at 1000mm. Untested

Capacity 2 Persons / SWL 250kg. Approx Dimensions 1100mm x 1100mm x 1200mm High. Untested

Approx Dimensions 900mm x 1200mm x 450mm Deep

Approx Dimensions 1050mm x 1500mm x 800mm Deep

Throat Approx 125mm. With Small Selection of Letter / Number Stamps

Approx Dimensions 920mm x 460mm x 1020mm High. With Thermostat. Single Phase

Approx Dimensions 900mm x 900mm x 2900mm High.

Approx Dimensions 900mm x 980mm x 2600mm High.

Length Approx 1500mm. Untested

Platform Area Approx 920mm x 920mm

Capacity 300kg. 0.4M/3. S/No 104964.

Disk Diameter 360mm. Motor 1.1kw

Approx Dimensions 914mm x 457mm x 1828mm High. No Contents

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011

PLEASE NOTE: This Lot Cannot be Released from Site Until Week Commencing 17th October 2011  

With One Door & Two Windows. Approx Dimensions 4930mm x 2750mm x 2650mm High. Not Contents

With One Door plus Windows. Approx Dimensions 3860mm x 3880mm x 2750mm High. Not Contents. Panels Approx 920mm Wide Each

With One Door & One Window. Approx Dimensions 4520mm x 3860mm x 2750mm High. Not Contents. Panels Approx 920mm Wide Each

Mains Regargable - With Charger. Untested

Approx Dimensions: 500mm x 300mm x 70mm Thick

Approx Dimensions 750mm x 500mm x 650mm High. No Contents

Approx Dimensions: 600mm x 600mm x 100mm Thick

Rise & Fall Table. Spindle Nose No 3 Morse Taper. Power Feed. Throat Approx 190mm.

Untested

Untested

Untested

S/No 16HV185734