Drilling Rigs & Equipment Auction

With Type 300 Drill Mast - Eurodrill CDH2400 Compact Double Drilling Head. S/No 900064. With Eurodrill Preventor System for Double Head Operation. Hutte S/No: H205ZX0127

Tracked piling rig weighing 13500kg. 2522 recorded hours. 4 jaw vice fitted. Ground pressure 60N/cm2. Designed for augering to 450mm diameter, wireline coring, traditional coring and down the hole (DTH) to 300mm width. S/No C6ZC0859

Tracked piling rig weighing 7900kg in standard format. 1486 recorded hours. Complete with 2 off remote control units. 4 jaw vice fitted. Ground pressure 7,6N/cm2 29N/cm2 in working configuration. Serial Number: C4ZS0138

With Kubota 4 cylinder diesel engine providing 31kw power output. 1810 recorded hours. 4 jaw vice/pipe clamp fitted. S/No 0903. With Remote Control Unit

YOM circa 2006. SN 0832. With Kubota 4 cylinder diesel engine providing 31kw power output. 4 jaw vice/pipe clamp fitted.

Fits to digging boom of any existing suitable sized excavator. Enables drillng at any angle for rotary coring or rotary percussive drillng.

Manufactured 1.5 metre stroke mast to allow drilling from tracked excavator to include quantity of hydraulic hoses and pressure/flow control units. NB: Previoulsy used in conjunction with Fraste ML excavator mounted unit

Custom built unit for working in confined tunnels with air driven head on conventional mast. The unit is mounted on a Messersi tracked undercarriage with only 42 hours recorded on the undercarriage.

Mini piling machine with kubota engine. 4 jaw pipe clamp/vice fitted. Recorded Hours 1996. S/No P030536

S/No 00012

S/No 00010

With choice of 2 off cutting wheels Note: Location Different to Main Auction

Unit on a towed chassis. From the Pro H series of mchines being model type DM. Powered by a 2 cylinder diesel engine with 277.2 recorded hours. S/No 391474

Water cleaning/recycling environmental control unit manufactured by Sonic. With water supply hoses

Powered by a SDMO T16k integral silenced skid mounted generator (was also used to power the Sonic mud cleaner unit). Mortar mixing is controlled by Kuchler Kmungg digital type flow control meter and is powered by a 4.2kw motor providing 48...

Towed unit with Hatz silent pack power unit allowing for cement bags to be dropped into mixing hopper with pressure flow pumping

Powered by Hatz Silent power pack the pump is on a towed chassis. S/No 779

Unit is on a towed chassis powerd by Lombardini two cylinder engine. S/No 976

YOM circa 2009 Powered by Hatz Silent Power Pack. Pump on a Towed Chassis

Fitted with PM16 Crane Manufactured in 2006 SN: GA261436. Note: Location Different to Main Auction

The unit has a 16" working width with 3 off crown cutter heads. Believed to have been previously used on Hutte 205GT drilling rig. Overall length 2200mm with rod size of 115mm

The working width of the unit is 16" and it is understood that this equipment has previously been used in conjunction with the 16" drilling head as listed above, although can be used in conjunction with other suitable drill heads...

30 off 3000mm length x 90mm OD drilling rods

12 off 1500mm length x 90mm OD drilling rods

40 off 3000mm length x 90mm OD driling rods

19 off 3000mm length x 90mm OD drill tubes

19 off 3000mm length x 70mm OD drill tubes

19 off 3000mm length x 70mm OD drill tubes

19 off 3000mm length x 70mm OD drill tubes

19 off 3000mm length x 70mm OD drill tubes

stillage of mixed sized tubes including 140mm, 90mm and 170mm sized pieces of assorted lengths

Pallet of assorted drill pipe spanners and associated tooling

24 off 3000mm length x 90mm OD drilling rods

18 off 3000mm length x 75mm OD drill tubes

31 off 1500mm x 120mm OD drill tubes

25 off 1500mm x 140mm OD drill tubes

31 off 3000mm length x 90mm OD drill tubes

45 off 3000mm length x 90mm OD drill tubes

72 off 1500mm x 170mm OD drill hole sleeves

15 off 1500mm x 170mm OD drill hole sleeves

35 off 1500mm x 115mm OD drill tubes

9 off 1500mm x 115mm OD drill tubes

35 off 1500mm x 115mm OD drill tubes

15 off 1500mm x 140mm OD drill tubes

8 off 3000mm length x 220mm drill tubes with 9no 3000mm x 90mm drill rods

41 off 1500mm x 140mm OD drill tubes in 2no stillages

30 off 1500mm x 140mm OD drill tubes

20 off 3000mm x 140mm OD drill tubes

7 off 3000mm x 220mm OD drill tubes

18 off 3000mm x 220mm OD drill tubes

46 off 1500mm x 140mm OD drill tubes

31 off 1500mm x 170mm OD drill tubes

21 off 1500mm x 40mm OD drill tubes

31 off 1000mm x 75mm OD drilling rods

22 off 1500mm x 140mm and 1no 2000mm x 140mm drilltube with core type cutting head

19no 1000m x 75mmdrilling rods plus 31no 1500mm x 75mm drilling rods

Approximately 100no pieces of 1500mm drilling rods plus tubes and fittings

Mixed stillage of 22 off x 3000mm x 90mm drill rods plus 35no 3000mm x 75mm drill rods

Mixed stillage of approximately 180no rods and tubes at 1500mm approx plus core drill bit

15 off 2000mm x 115mm drillng rods

Stillage of mixed large diameter drillng tubes

19 off 1500mm x 150mm drill tubes

20 off 1500mm x 150mm OD drill tubes plus 30no 1000mm x 115mm OD drill tubes

17 Off at 3000mm x 70mm approx OD

18 Off Mixed Sized

Assorted Drill Rods & Bits, previously used with Comacchio 205 Rig

13 Off Core Drills, Rod Joints & Bits previuosly used with Comacchio GEO 205 Rig

2 Off Standard Flow/Speed Hydraulic Drive Motors, previously removed from Comacchio GEO 205 Drilling Rig (Lot 5)

10 off units in total with 6no at 75mm and 4no at 55mm approximate working width

awaiting details

5 off units ranging from 55mm - 95mm working width that appear to have had very little useage

17 off 1500mm x 165mm drill tubes

54 off approx 1500mm x 55mm alloy drill rods

Powered by Eaton hydraulic motors with 90mm approx outlet. 3no appear to be complete, 2no appear to require additional parts

Manufactured in 2007 the device allows for easier manipulation of large sized tubes, casings and rods

46 off 3000mm x 90mm drilling rods

75 off 1500mm x 170mm drill tubes

awaiting details

19 off in total ranging from75mm to 190mm approx working widths

Qty of mixed sized tubes and drill heads ranging from 45mm to 100mm approx working widths

Overall length of 1900mm approx with diameter of 90mm approx. NB: power feed cables have been cut approximately 150m above the unt

Assorted pallet of sleeves, tubes and rods

110mm approx OD drilling head

1x 130mm, 1 x 140mm, 1 x 110mm approx OD

110mm OD approx sized down the hole extractor unit

110mm OD approx sized down the hole extractor unit

Designed for the feeding of geothermal piping down the drill hole the unit can be rotated on the base and features a hydraulic powered drive motor

2no units one on a tripod stand

Three phase powered by 15kva motor the unit is on a towed chassis

Skid mounted unit consisting of Harben 8.20 type pump powered by Teco 30kw motor designed to work at 1250rpm delivering up to 5000psi/ 345BAR. Complete with hoses and lance

Weighing capacity of 375kg measuring by 0.5kg divisions

1 x 130mm and 1 x 140mm OD approx

2 x T2-56 diamond reamer shells DCRT2056, 2x type T2-76 impregnated bit, series 8 type, 2x type T2-76 surafce sets, 2x T2-76 diamond reamer shells.

2 x T2-76 impregnated bits, series 8, 2x Atlas Copco Craelius SC10, 1 x tool size T2-56 imprenated core bit, 1x T2-76 surface sets, 2x Craelius SC2, 1x T2-76 impregnated bit, 1x T2-76 diamond reamer shell.

4x Red 8 heads, 4x 85mm cutting bits, 3x TC 100mm liner sets

1x HQ 90mm casing shoe, 1x 55mm drill bit, 2x #9 core bit for Ultra & Very hard fine grain formations 75mm approx OD, 1x Atlas Copco

2x 140mm reaming shells, 2 x 75mm reaming shells, 1x Diamond Boart 75mm core drill, 2x 120mm core drills, 1 x 75mm, 1x85mm, 1 x 115mm core drills

1x220mm, 1x 170mm, 1x180mm, 1 x 140mm OD bits

1x275mm approx , 1x220mm core bits

1x 275mm, 1x 150mm, 1x 130mm approx OD

9x 100mm and 2x 105mm core drills

12x 100mm, 3x 75mm, 2x 65mm,5x 55mm and 1x140mm OD approx

3x 140mm, 1x100mm, 1x90mm, 2x55mm, 1x 60mm, 2x45mm, 1x65mm, 1x145mm, 2x170mm, 1x1300mm OD approx

4x 145mm, 2x100mm, 1x95mm, 1x65mm, 1x75mm, 1x35mm, 1x55mm, 1x90mm approx OD

3x 145mm, 2x 135mm, 2 x105mm approx OD

2x 140mm, 5x 145mm approx OD

Appears to have had very little use, 110mm approx OD

25 psi rated, max speed 700rpm, 12.9hp, sn:11120186

Maximum speed of 1800rpm, serial number 07018-10009

Atlet 160STFS 450XSN Battery powered forklift manufactured in 1989. Designed for seated operation. Features drop down stabiliser legs. Serial Number: XSN-8139S

Atlet 125 150st 250-AJN Battery powered forklift manufactured in 1989. Designed for stand up operation. Serial Number: AJN-97405

Atlet 100STF 3450-XSN Battery powered forklift manufactured in 1989. Designed for seated operation. Features drop down stabiliser legs. Serial Number:XNS-81365

Atlet 160STFS 450-X3N Battery powered forklift manufactured in 1989. Designed for seated operation. Features drop down stabiliser legs. Serial Number:XSN-8138S

Atlet 125 150st 250-AJN Battery powered forklift manufactured in 1989. Designed for stand up operation. Serial Number:AJN-9739S

Atlet 125ST 250-AJN Battery powered forklift manufactured in 1989. Designed for stand up operation. Serial Number:AJN-9743S

Atlet 125ST 250-AJN Battery powered forklift manufactured in 1989. Designed for stand up operation. Serial Number: AJN-9742S

Atlet 125-150ST 250-AJN Battery powered forklift manufactured in 1989. Designed for stand up operation. Serial Number:AJN9738S

Atlet 125ST 250-AJN Battery powered forklift manufactured in 1989. Designed for stand up operation. Serial Number: AJN9741