E T Equipments Ltd

Max Swing Over Bed 1030mm. Max Turning Dia 900mm. Max Turning Length 1600mm. raverses X = 470mm Z = 1650mm. Turret - 12 Stations

Controlled Axes: X, Y, Z, W & C. Max Machining Dia 380mm. Traverses X = 230mm Y = 100mm Z = 575mm. Main Spindle Speed: 4,000 rpm. Sub Spindle Speed 6,000 RPM. Turret - 12 Stations.

Max Machining Dia 620mm. Max Machining Length 1100mm. Max Dia Swing Over Bed 1000mm. Traverses X = 345mm Y = 1120mm. Turret - 12 Stations.

Complete with EMT Super 80 Short Magazine Bar Feed. Traverses X = 419.1mm Z = 383.54mm. Turret - 12 Stations.

Controlled Axes: X, Y, Z & C. Max Dia Swing 400mm. Machining Capacity - Chucking 250mm Dia. Length 500mm. Traverses X = 215mm Z = 530mm Y = 100mm. Spindle Speeds 100 to 3,000 rpm. Turret - 10 Stations Plus 12 on ATC

Twin Pallet Stations 630mm x 630mm. Traverses X = 820mm. Y = 800mm. Z = 800mm. B = 360 deg - Index Angle (Min. 1 deg) Absolute. Spindle Nose 50 DV/Cat. ATC Capacity 120 Tools.

Twin Pallet Stations 500mm x 500mm. Traverses X = 710mm. Y = 680mm. Z = 600mm. Table Indexing 1 deg. Spindle Nose 50 DV/Cat. ATC Capacity 60 Tools.

Table 1623mm x 660mm. Traverses X = 1524mm Y = 662mm Z = 635mm. ATC Capacity 20 Tools. Spindle Nose 40BT.

Table 600mm x 400mm. Traverses X = 480mm Y = 400mm Z = 430mm. ATC Capacity 20 Tools. Spindle Nose 30BT.

Table 760mm x 410mm. Traverses X = 560mm Y = 410mm Z = 410mm. ATC Capacity 30 Tools. Spindle Nose 40 DV/ Cat.

Twin Pallet Stations 630mm x 400mm. Traverses X = 760mm Y = 450mm Z = 450mm. ATC Capacity 50 Tools. Spindle Nose 40 BT.

Table 430mm x 295mm. Traverses X = 420mm Y = 320mm Z = 100mm. Spindle Nose 4mm Dia Collet.

With 12 Station Turret. Collet Chuck. Tail Stock. Parts Catcher. Machining Dia 280mm x 381mm Length

Max Swing Over Bed 580mm. Max Turning Length 600mm. Traverses X = 365mm Z = 620mm. Turret - 12 Stations

Table 1219mm x 228mm. Spindle Nose 30 Int Quick Change

Fitted with Knuckle Type Double Swivel Milling Head. Table 1435mm x 460mm, Long Traverse 1100mm. Power Feeds. Spindle Nose 40 Int

Fitted with Knuckle Type Double Swivel Milling Head. Table 1635mm x 460mm, Long Traverse 1300mm. Power Feeds. Spindle Nose 40 Int

Swing over Bed 554mm Dia x 1500mm B.C. Swing over Cross Slide 370mm Swing in Gap 830mm. With Two Axis DRO.

Swing over Bed 535mm Dia x 1000mm B.C. Swing over Cross Slide 370mm Swing in Gap 815mm. With Two Axis DRO.

Swing over Bed 535mm Dia x 1000mm B.C. Swing over Cross Slide 370mm Swing in Gap 815mm. With Three Axis DRO.

Granite Surface Area 1648mm x 8600mm. Height Under Cross Rail 830mm. With Renishaw PH10MQ Probe.

Swing over Bed 390mm Dia x 1270mm B.C. Swing over Cross Slide 240mm. Swing in Gap 580mm. With Two Axis DRO.

Swing over Bed 390mm Dia x 750mm B.C. Swing over Cross Slide 240mm. Swing in Gap 580mm. With Two Axis DRO.

Swing over Bed 390mm Dia x 750mm B.C. Swing over Cross Slide 240mm. Swing in Gap 580mm. With Two Axis DRO.

Swing over Bed 390mm Dia x 750mm B.C. Swing over Cross Slide 240mm. Swing in Gap 580mm. With Two Axis DRO.

Swing over Bed 335mm Dia x 635mm B.C. Swing over Cross Slide 210mm. Swing in Gap 480mm.

Rise & Fall Table. Throat Distance Approx 800mm. Spindle Nose No 4 Morse Taper. Spindle Speeds 60 to 1750 RPM

Capacity 250mm Dia

Throat 609mm. With Blade Welder.

Blade Dia Approx 300mm

With Hi-Line Refrigerant Air Dryer & Two Air Receivers

Capacity 1000mm x 400mm x 600mm. With Floor Mounted Crane Gantry Fitted with Atlas Copco Pneumatic 500kg Hoist - Untested

With GIS 1.5 Tonne Electric Chain Hoist. Untested

With GIS 0.5 Tonne Electric Chain Hoist. Untested

Inspection Recommended

Internal Dimensions 1450mm x 900mm x 900mm High

Internal Dimensions 1200mm x 1200mm x 1200mm High

Internal Dimensions 1000mm x 700mm x 700mm High

110 Volts - 2900w

2 off 2 3/8" Dia & 2 off 2 7/8" Dia

2 off Tapmatic 1.5mm to 7mm & 1 off Newtool 1.4mm to 7mm.

2 off 300mm Digital - Require Attention, Mitutoyo 150 Digital, Dgimatic 150mm Digital & Mitutoyo 450mm.

1219mm x 914mm (48" x 36")

914mm x 914mm (36" x 36")

AC/DC with Water Cooler

Single Phase

Max Weight 1 Ton - Untested

Single Phase

Single Phase - Digital Display

Note Ducting to be disconnected at the nearest Internal Joint.

Used for Welding Preparation

Approx 2133mm Between Uprights. Untested

Approx 5M Between Uprights. Untested

Capacity 254kg - Untested

Capacity 508kg - Untested

Pair of Camlock Clamps 1.5 Tonne & Block Lifter 200kg Capacity. All Untested

Max Load 250kg - Untested

With Side Shift, Solid Tyres, Max Lifting Height 3300mm with Charger. Untested

With Solid Tyres, Single Rear Wheel, Max Lifting Height 3600mm. Note No Battery Charger Available - Untested

Capacity 2000kg - Requires Battery - Untested

Untested

Untested

Throat 355mm

Capacity 300mm x 150mm (12" x 6")

Single Phase

Single Phase

Wheels 300mm Dia x 50mm

Capacity 500kg - Max Lift Height 1000mm - Untested

Capacity 500kg - Max Lift Height 1000mm - Untested

Capacity 500kg - Max Lift Height 1000mm - Untested

Capacity 500kg - Max Lift Height 1000mm - Untested

Capacity 500kg - Max Lift Height 1000mm - Untested

For 300 & 400mm Width. Single Phase

Max Pressure 8 Bar

Both Single Phase

Including Racks - Tote Bins - Fasteners - O Rings - Seals - Electrical Cable etc Not Machine Components. Viewing Recomended

Incuding Aluminium & Stainless Steel - Tube , Bar, Cut Blanks & Misc Sections. Viewing Recomended

Including Small Multidrawer Storage Cabinets & Tote Bins with Some HSS Tooling