Engineering Machine Shop Business Closure

Kitagawa BB210 Ø254mm 3 Jaw Power Chuck. Maximum Swing Ø695mm. Maximum Machining Ø380mm. Main Spindle Maximum 5,000 RPM. 26.0 kW Spindle Motor Output. Rapid Traverse 'X'=30m/min, 'Z'=33m/min. Feed Axis 'X'=234mm, 'Z'=62...

Autostrong 3 Jaw Manual Self Centering Chuck. Swing in Gap 700mm. Swing Over Bed 532mm. Distance Between Centres 1,250mm. Spindle Speed Range 25-2,500rpm. 10hp Spindle Motor. Cross Slide Travel 205mm. Bed Width 370mm. Quick Tool Change Syst...

Nominal Load 2 Tonnes. Centre of Gravity 500mm. Lifting Height 4m. Turning Radius 2.05m. Hoisting With/Without Load 0.6m/s. Lowering With Load 0.5m/s. Engine Manufactured by Hyundai. Type G 420 F. Engine Power 35kW. Weight 3,614kg. S/No. NF...

Bed Size 1,240 x 550mm. Axis Travel 'X'=1,000mm, 'Y'=508mm, 'Z'=460mm. Maximum Load 800kg. Maximum Spindle Speed 5,000rpm. 30 Tool ATC. Spindle Taper ISO 50. Spindle Power 15kW. Machine Dimensions (W)6,350 x (D)2,735 x (H)3,000mm. S/No. 816...

Kitagawa BB210 Ø254mm 3 Jaw Power Chuck. Maximum Swing Over Bed 440mm. Maximum Machining Ø300mm. Maximum Machining Length 500mm. Axis Travel 'X'=180mm, 'Z'=510mm. Rapid Traverse X & Z 30m/min. Spindle Speed 36-3,600 RPM. M...

Ø250mm 3 Jaw Chuck. Swing Over Bed 381mm. Swing Over Gap 571mm. Distance Between Centres 762mm. (16) Speed Range 25-2,000rpm. Quick Tool Change System. S/No. 6/0042/22641

Table Dimension 1,245 x 230mm (3 'T' Slots). Spindle Taper NSK 40. Speed Range Low 50-470rpm, High 420-3,750rpm. 3HP Spindle Motor. With Longitudinal Power Feed. S/No. 78030807

Screen Ø310mm. Table Dimension 280 x 150mm. S/No. 560103

Table Dimension 1,220 x 255mm. (3 'T' Slots). Spindle Taper ISO 40. (8) Speed Range 57-2,275rpm. With Longitudinal Power Feed. S/No. 2082

Maximum Pressure 10 Bar. Flow 0.12-0.99m³/min. Air Receiver Capacity 200 Litres. Run Hours 4,417

Capacity 18 x 6". Eclipse Vice Dimension 450 x 150mm. Wheel Dimension Ø180 Diameter x 13 x Ø31.75mm. Maximum Wheel Speed 3,000rpm. S/No. 53R137 (1956)

Maximum Capacity Round Ø160mm. Blade Dimension 3,000 x 20mm. Roller Conveyor Dimension 1,220 x 375mm

11kW Motor. 68CFM

Swivel Table Dimension 482 x 482mm. Throat 612mm. S/No. 13435.

Table Dimension 222 x 365mm. Throat 185mm. Speed Range 400-4,500rpm. Spindle Taper MT3. Voltage 22v. With Hand Vice (Jaw Width 75mm). S/No. 391200384.

Table Dimension 330 x 195mm & 270 x 195mm. Belt Width 150mm & Ø250mm. S/No. A111461 (2011).

Capacity Ø210mm. Blade Dimension 350 x 30mm.

Table Dimension 615 x 460 x 80mm. Angle Plate 200 x 250 x 300mm.

Rack Dimension 2,000 x 265 x 1,930mm. Materials Including Mild Steel, Stainless Steel & Aluminium.

Complete Set of Equipment to Equalise Height of 4 Machine Vices. Jaw Width 160mm. Approximate Jaw Travel 150mm. TO SUIT LOT 4

Internal Tank Dimensions 720 x 485mm.

Wheel Ø152mm. Wheel Speed 2,800rpm. Voltage 440v.

Maximum Speed 6,000rpm. Drive 1:1. VDI 40. Collet ER 32.

Maximum Speed 6,000rpm. Drive 1:1. VDI 40. Collet ER 32.

25 x 25mm Section

25 x 25mm Section

Range 0-75mm. (0-3")

Including Insize 0-150mm Digital Vernier Caliper, Insize 50mm Zero Setter & Kennedy 150mm Engineers Square.

Including Mitutoyo Metric Gauge Block Set, Imperial Gauge Block Set (Incomplete), 8-12" Imperial Micrometer Set & 14" Vernier Height Gauge.

Range 25-225mm.

Ø228mm Blade. Capacity Solid Round @ 90˚ Ø45mm. Solid Round @ 45˚ Ø38mm. 1hp Motor. Voltage 230v. Coolant System. S/No. A11891 (2009).

Including 'V' Blocks and Clamps, Parallel Blocks, Sine Table & Engineers Vices

1.0mm-2.9mm In 0.1 Increments. 7.0-8.9mm in 0.1mm Increments

3.0mm-4.9mm In 0.1 Increments. 9.0-10.9mm in 0.1mm Increments

5.0mm-6.9mm In 0.1 Increments. 11.0-12.9mm in 0.1mm Increments

7.0mm-8.9mm In 0.1 Increments. 13.0-14.9mm in 0.1mm Increments

240V

240V

240V

Base Dimension 500 x 400mm.

1,000W. Voltage 240v.

1.0mm-2.9mm In 0.1 Increments. 7.0-8.9mm in 0.1mm Increments

3.0mm-4.9mm In 0.1 Increments. 9.0-10.9mm in 0.1mm Increments

5.0mm-6.9mm In 0.1 Increments. 11.0-12.9mm in 0.1mm Increments

7.0mm-8.9mm In 0.1 Increments. 13.0-14.9mm in 0.1mm Increments

Acetal Black Ø100 x 2,930mm.

OD Ø50.76mm ID Ø47.3mm x 4,900mm Long. (49) 600mm Lengths and (3) Offcuts

OD Ø50.80mm ID Ø44.3mm x 4,100mm Long. (3) 600mm Offcuts

Approx Dimensions L1,045 x W650 x H955mm.

30 - 110mm

KSJ-10H-60-P and S1-301612-110-40-40-P

25 x 25mm Section. Range 2-5mm

25 x 25mm Section

R224 Type. 25 x 25mm Section

25 x 25mm Section. Includes a Quantity of WNMG08 inserts.

25 x 25mm Section. Includes a Quantity of R105.0825.2.8.T125 Inserts with Tool Holder

Quantity of DCxx11 Inserts

Quantity of CC**09 Inserts

Quantity of DCxx07 and DC**06 Inserts

(2) Blocks and Blades. (2) Blades and (1) Solid Tool. Quantity of Part Off Inserts

25 x 25mm Section Tools. Quantity of CCxx12 and DCxx1504 Inserts

25 x 25mm Section Tools. Quantity of VNxx16 and VCxx16 Inserts

Various Section. Quantity of VCxx11 Inserts

Quantity of ER16 & IR16 Threading Inserts

25 x 25mm Section. Quantity of 226RG and R166 Threading Inserts

C20S-SCLCR09 and BO8H-SCLCR06 02-10

Some Modified to Suit

Unplated and Zinc Plated, Metric M5 - M12

UNC, UNF, BSP and Metric

Ø32mm 4 Insert, Ø26mm 2 Insert and 25mm 2 Insert High Feed Cutters

(1) Ø125mm 5 Insert and (2) Ø25mm 2 Insert Cutters

Ø80mm 8 Insert, Ø50mm 5 Insert, Ø25mm 2 Insert and 18mm 2 Insert Cutters

Drill Bit Kits, Machine Tapping Kit, Countersink Kit, Peg Drill Bits, Solid Carbide End Mills

Format Revolving Machine Centre, (2) Morse Taper Drill Chucks, Morse Taper Sleeves

Collet Chuck Extension Adaptor and Collets, Jacobs 6B 1/2" Drill Chuck

Internal Grooving, Button Turning, Face Grooving, External Grooving and Part Off Tools with a Quantity of Inserts

ARNO U Drill, YG Spade Type Drill Bits and Inserts, Sandvik U Drills, Komet U Drill

External and Internal

Knurling Tools and Turning Tools

Includes Ø50mm Ø63mm and Ø80mm

Spiral Point, Spiral Flute

Sizes Include 6mm, 8mm, 10mm, 16mm, 20mm. Countersink Mills

Centre Drill Bits, Spotting Drill Bits and Jobber Drill Bits