Engineering Machinery

Table Size 6030mm x 1030mm, Longitudinal Travel X Axis 4000mm, Headstock Rise & Fall Z Axis 1600mm, Spindle Tape 50 int, Ram In/Out Y Axis 920mm, Input415/3/50 ac 25 Kw. A loading charge of £500 will be added to the buyer's i...

Table size 4030mm x 1030mm, Longitudinal traverse column 2200mm, Vertical traverse head 1600mm, Cross traverse ram 900mm, Spindle taper 50 int. does not include tapping arm shown in photos. NOTE - Tapping arm that appears on some photos is ...

Table size750mm X 360mm, Table load 350Kg, Longitudinal traverse 600mm, Cross traverse 410mm,Vertical traverse 510mm, Speeds 60 - 8,000 rpm. A loading charge of £300 will be added to the buyer's invoice.

Year of Manufacture 1984, Swing over bed 1450 mm, Swing over cross slide, 600 mm, Traverse Z axis 350 mm, X Axis 700 mm.Chuck to turret face 680 mm, Input 380/3/50 20 hp approx.Spindle Speeds 0 - 400 rpm. A loading charge of £300...

Table size 1000mm x 1000mm, Table Longitudinal traverse (Y)1000mm, Table Cross traverse (X)1200mm, Table Swivels 360 Degrees, Head stock vertical traverse (Z)1000mm, Input 380/420/3/50 ac 7.5 kW, Spindle & facing speeds 5.6 - 280 rpm, S...

Table Size 48" , Swing60", Height under cross slide 47", Cross slide rise & fall 22", Turret rise & fall 38". Turret traverse 36, " speeds 4.5-100 rpm. A loading charge of £400 will be added ...

Height of centres 10.1/2 , Between centres 80", Swing over bed 21", Swing over cross slide 14" , Swing in gap 32", Spindle speeds 18-1400 rpm, Spindle bore 3.5/8". A loading charge of £200 will be added t...

Height of centres 400mm, Between centres 3000mm, Swing over bed 800mm, Swing over cross slide 540mm, Swing in gap 1020mm, Spindle speeds 8-1000 rpm, Spindle bore 100mm. A loading charge of £200 will be added to the buyer's invoic...

Year of Manufacture 1996, Height of centres 200mm, Between centres 2000mm, Swing over bed 400mm, Swing over cross slide 220mm, Swing in gap 600mm, Spindle speeds 22.4 - 2000 rpm. A loading charge of £200 will be added to the buye...

Spindle speeds 40 - 1850 rpm, Spindle bored No 5 morse taper, Spindle rise & fall 12", Feed rate 0.001" - 0.026", Throat 42" x 54", spindle brake , coolant and box table. A loading charge of £200 will...

Capacity 520 mm diameter or 520 mm square, sInput415/3/50 7.5 kw approx, Vice opens 525 mm, Stroke of feed vice 450 mm. A loading charge of £200 will be added to the buyer's invoice.

Capacity Rounds 10", Squares 10" x 10" , Input 415/3/50 5hp , Speeds 50-350 sfm, Stroke of feed vice 24". A loading charge of £100 will be added to the buyer's invoice.

Capacity Aluminium M16, Steel M14. A loading charge of £25 will be added to the buyer's invoice.

Input 415/3/50 7.5 kw, CFM 33, PSI 100. A loading charge of £25 will be added to the buyer's invoice.

A loading charge of £25 will be added to the buyer's invoice.

Year of Manufacture 1998, Table area 11" x 10", input 380/415/3/50 ac 0.37 kW, Spindle speeds 500 - 4000 rpm. A loading charge of £25 will be added to the buyer's invoice.

A loading charge of £25 will be added to the buyer's invoice.

A loading charge of £25 will be added to the buyer's invoice.