EX Three Bee Tools Limited - Business Closure Sale

Sale of remaining assets once owned by Three Bee Tools Limited. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.

Ended: 10th October 2024 14:00

LOT 1
1996 Jomars Mecrode Minor Spark Eroder
With 50amp fuzzy logic control generator. Complete with sparking fluid, spare filters, flushing pipes and clamp set. 3R tooling including 3R-321, 4 x 90deg hydraulic chuck, 3R-6ex7 electromagnetic chuck, 3R-7control unit, 3R-a3620 universal...
Sale has ended
LOT 2
1997 Boy 22D Diptronic Injection Moulding Machine
From new condition this machine has had low usage as it has been used mainly on testing mould tools rather than mass production from them. Hours used: 689. Clamping force 220Kn. Screw diameter 32 m/m. Length x Width x Height: 2423 x 810 ...
Sale has ended
LOT 3
1988 Boy 22S Diptronic Injection Moulding Machine
Clamping force 220Kn. Screw diameter 24m/m. Screw stroke 80 m/m. Equipped with needle valve nozzle and open nozzle for using decompression. Length x width x height: 2260 x 765 x 1565 m/m. Weight 760kg. M/c no 19264 (1988).
Sale has ended
LOT 4
Europa 7530 Hydraulic Surface Grinder
With 650 x 250. Selter close pole permanent magnetic chuck, diamond wheel dresser, wheel balancing stand and mandrel, spare wheel flange, spanner, coolant, dust extractor, compound angle sine table. S/No. 926 (1989)
Sale has ended
LOT 5
Jones and Shipman 1300EIU Universal Cylindrical Grinder Fitted with Internal Spindle
3 jaw and 4 jaw chucks, face plate, centres, work carrier set, Sony 2 axis digital readout, spare grinding wheels. S/No. 50464 (1962)
Sale has ended
LOT 6
Dean Smith and Grace (DSG) 1307 Centre Lathe
Fitted with Sony digital readout, complete with 3-jaw self-centring chuck, 4-jaw self-centring chuck, 4-jaw independent chuck, face plate, drive plate, centre bush, fixed and revolving centres, fixed and travelling steadies, power drilling ...
Sale has ended
LOT 7
1980 Emi-Mec Autosprint Series E Pegboard Auto Lathe, S/No.ese16027/6.
1- Denco Miller Mistral single phase compressed air drier serial No WH2871. 1-Pafix GL31 tapping head with 8 collets and drivers 6m/m to 16m/m. 1-Pafix GK11 tapping head with 7 collets and drivers 2m/m to 6m/m. 1-3/4 inch drill chuck with 1...
Sale has ended
LOT 8
Jones and Shipman 540P Surface Grinder with Optidress E Wheel Profile Dressing Attachment
with dual dials, auto lubrication, low voltage light, two speed wheel head, coolant, dust extractor, Heidenhain 2axis double datum digital readout, Eclipse 18inch x 6inch magnetic chuck, Optidress E wheel profile dressing attachment, Hum...
Sale has ended
LOT 9
Bridgeport Interact 1 MK2 Milling Machine Inclusive of Blue 5 drawer cabinet and all contents as pictured.
Sale has ended
LOT 10
Bridgeport BR2J Turret Mill
48inch table, chrome slides, power feed, slide pressure lubrication, coolant, low voltage light, dual metric/imperial dials, 2 axis digital readout, splash tray, 6 inch swivel vice, No 3 right angle attachment with arbor support bracket, Sm...
Sale has ended
LOT 11
Alexander 3AS Pantograph and Die-Sinking Mill
With overhead former arm, 3D setting arm, metric and imperial collets, clamp sets, spanners, Avon typeface, straight and rotary type holders, styluses and tool bits. Spindle speeds up to 20,000rpm. S/No. F1889 (1980)
Sale has ended
LOT 12
Alexander 2CGC Metric Form Tool Cutter Grinder
On Versatool cabinet 52cm wide x 48cm deep x 97cm height containing 1fixed base shelf + 1 adjustable swivelling shelf +1 adjustable non swivelling shelf, swivelling light/magnifier with spare tubes, wheel mounting flanges, spanners, wheel t...
Sale has ended
LOT 13
John Brown Cumberland Granulator Model 64R on Wheels
m/c number not identified (1996). Wired with 3-phase 1.5Kw, 415volt, portable plug.
Sale has ended
LOT 14
BPI SHD Hopper Drier Type Mini-D-3
no 3/87; 3Kw, 3-phase; 415volt, fitted with single-phase loader. Used to load pre dried material the hopper heater being made redundant.
Sale has ended
LOT 15
BPI CD-9 Cabinet Drier with 9 trays
Length x width x height: 880 x 730 x 1560 m/m. Weight 135kg. (1988)
Sale has ended
LOT 16
Woywood Plastore Plasticolor Colorette Proportioning Unit
single-phase, 240volt, fits both the 22S and the 22D moulding machines.
Sale has ended
LOT 17
BPI 150F Tool Temp Mould Temperature Controller on Wheels
6500watts, 3-phase, 415volt. Machine no B7-4202. Will be emptied of water for transporting
Sale has ended
LOT 18
BPI TT4000 Tool Temp Mould Temperature Controller on Wheels
2100watts, 3-phase, 415volt. Machine no B6 1748. Will be emptied of water for transporting.
Sale has ended
LOT 19
BPI IC5 Chiller
single-phase 240volt; serial number 88/053. Will be emptied of water for transporting. Cooling circuit needs attention.
Sale has ended
LOT 20
Hydrovane 13 PU Air Compressor Fitted with 13ACA After Cooler, Isolator and Tripod Stand.
Spindle seals need replacing to prevent oil leakage when switching off.
Sale has ended
LOT 21
(1) Tepcon 300 electrostatic air cleaners (single phase).
Sale has ended
LOT 22
2.5 MC Dust Control Unit on Wheels
3 phase 415volt trailing plug.
Sale has ended
LOT 23
Nilfisk GS82 single phase industrial wet and dry vacuum cleaner on wheels, hose and accessories.
Sale has ended
LOT 24
DUS Ultrasonic Polishing System
Complete with diamond files, ruby stones and stone holders.
Sale has ended
LOT 25
1 Ton capacity floor crane with lifting eyes, chain sets, belt slings and shackles
Note this Lot cannot be removed until all heavy items have been collected.
Sale has ended
LOT 26
Hewlettt Packard 430 Design Jet AO Size Plotter on stand with printing paper rolls.
Sale has ended
LOT 27
Wooden Bench 244cm x 50cm deep x 84cm Height with No 23 quick release vice
Note - contents not included
Sale has ended
LOT 28
Thousands of nuts, bolts, washers, screws, springs, etc. under bench item. NOTE: Contents only, bench can be purchased separately, see Lot 27
Sale has ended
LOT 29
Lista Blue Steel Cabinet 143cm height x 72cm width x 75cm depth with 6 roller drawers of various depths.
Sale has ended
LOT 30
Cytringen 225 amp electric arc welder with rods, wire brush, pick hammer, head shield with spare glasses.
Sale has ended
LOT 31
Telwin Technology Inverter TIG 165 DC/HF Welding set with foot switch, nozzles, gas flow meter, rods, auto dark shield (no gas bottles included).
Sale has ended
LOT 32
Steel cupboard 180cm height x 122cm wide x 450cm depth with fixed base shelf and 3 adjustable shelves.
Sale has ended
LOT 33
(2) Work Trolleys 102cm x 65cm x 83cm height.
Sale has ended
LOT 34
Kaiser + Kraft Oil drum lifting attachment for fork lift trucks
Sale has ended
LOT 35
CDU27/54P-FM Oils Filtration Unit 3 phase 415v trailing plug, 0-4 bar pressure, spare filters
Sale has ended
LOT 36
Elliot 5 inch Centre Height Dividing Head
Sale has ended
LOT 37
(4) Slingsby Machine Moving Roller Skates
Note this Lot cannot be removed until all heavy items have been collected.
Sale has ended
LOT 38
Harig No. 1 Grind All Fixture
Sale has ended
LOT 39
Surface Plate 24inch x 18inch anti rust coating on face
Sale has ended
LOT 40
Crown Windley Vee Blocks Precision matched pair with clamps
Sale has ended