Former Assets of Mitchell Dryers Ltd - In Administration

Manufacturers of Rotary Dryers, Calciners, Band Dryers, Fluid Bed Dryers, Vacuum Dryers, Mixers. Sale Includes: Heavy Duty Machine Tools, Fabricating Equipment, Welding, Tooling and Office Equipment

Ended: 30th November 2016 15:00
  • site
    LOT 1
    Wohlenberg Model V1000 Straight Bed Heavy Duty Centre Lathe - Metric Machine with 2 Axis DRO
    Diameter Swing Over Bed 1000mm x 5000mm B.C. With Rapid Long Traverse. Power Feed to Top Slide. 4 Way Tool Post. 1000mm Diameter 4 Jaw Chuck. Speeds 4.5 to 900 RPM. Spindle Bore 95mm. S/No HO 1222
    Sale has ended
  • site
    LOT 2
    Faccin Model 4HEL Type 211/8 - 4 Roll Power Bending Machine - Power Bending Rolls
    Length of Rolls 2060mm. Roll Diameters - Central 210mm - Lateral 165mm. With Hydraulic Drop End Support. Mobile Pedestal Control Panel. S/No 96091425-1433 - 1996
    Sale has ended
  • site
    LOT 3
    Webster & Bennett Type 48" EH Single Column Vertical Boring & Turning Machine with Elevating Rail (Extended Height) & 2 Axis DRO.
    Table / 4 Jaw Chuck Dia. 1219mm (48"). Max Swing / Dia. 1574mm (62"), Max Height under Cross Rail (Extended by 304mm (12") = 1524mm (60") - Speeds 8.6 to 192 RPM - Timken Bearing Table. Serial No. 5370-6
    Sale has ended
  • site
    LOT 4
    Webster & Bennett Type 60" M Single Column Fixed Rail Vertical Boring & Turning Machine.
    Table / 4 Jaw Chuck Dia. 1524mm (60"). Max Swing / Dia. 1625mm (64"), Max Height under Cross Rail 609mm (24") Speeds 3.8 to 83 RPM Serial No. 5594-4
    Sale has ended
  • site
    LOT 5
    Pearson 100 Ton Hydraulic Down Stroking Press Brake
    Max Bending Force 100 Tons. Beam Length 3733mm (12' 3"). Distance Between Frames 3098mm (10' 2"). With Guardscan Light Guards. S/No 675308/4
    Sale has ended
  • site
    LOT 6
    Pearson Hydraulic Guillotine
    Capacity: 3048mm (10') x 6.5mm (0.25") With Power Back Gauge & Mechanical DRO. Front Squaring Arm & 3 Support Arms. S/No 713104/1
    Sale has ended
  • site
    LOT 7
    Steco 3 Roll Power Pyramid Bending Machine - Power Bending Rolls
    Length of Rolls 3080mm. Approx Roll Diameters - Top 400mm - Bottom 300mm. With Hydraulic Drop End Support. Approx Capacity 3000mm x 20mm.
    Sale has ended
  • site
    LOT 8
    Roundo Type R3 - 3 Roll Powered Section Rolling Machine
    Approx Roll Diameter Fitted 220mm. Capacity 14 CM'3. Machine No 863848 - 1986
    Sale has ended
  • site
    LOT 9
    Asquith Model OD1 Mk2 16/72 Radial Arm Drilling Machine with Box Table
    With Power Rise & Fall Arm. Spindle Brake. Speeds 22 to 1000 RPM. Spindle Nose No 5 Morse Taper. Box Table 1220mm x 915mm x 510mm High. S/No P33948 - March 1982
    Sale has ended
  • site
    LOT 10
    Kasto Model SSB 260VA Automatic Vertical Band Sawing Machine
    Capacity: 250mm x 250mm. With Digital Length Stop & Roller Tracking. S/No 6510 114 132. 1995.
    Sale has ended
  • site
    LOT 11
    Pearson 300 Ton Hydraulic Down Stroking Press Brake
    Max Bending Force 300 Tons. Beam Length 3733mm (12' 3"). Distance Between Frames 3098mm (10' 2"). With Optoscan Light Guards. S/No 4856
    Sale has ended
  • site
    LOT 12
    Yale Model GDP 50 MF E2348 Diesel Powered Fork Lift Truck
    Max Capacity 5000kg. With Solid Tyres. Side Shift. S/No FRE0330. Untested
    Sale has ended
  • site
    LOT 13
    Bode / Esab Longitudinal Seam Welder & Horizontal Rotator with Headstock & Tailstock
    Capacity: Rotator 4M Between Centres. Max Swing 1800mm. With ESAB LAE 800 Welding Power Supply. Bode Cladding Installation S/No M32427.
    Sale has ended
  • site
    LOT 14
    Bode Model RC Column & Boom Welding Machine. With ESAB Welding Controls
    Welding Equipment:- ESAB LAE 800 Power Supply. Approx Cross Travel 3M x 3.2M Vertical Travel. Bode RC S/No M.22008
    Sale has ended
  • site
    LOT 15
    Bode - Pair of Bode TSAR 500 Self Aligning Welding Rotators - Powered & Idler Rolls - For Track Mounting
    Wheel Diameters Approx 381mm - (15") x 127mm (5") Wide. Capacity 25 Tons. S/No M22009
    Sale has ended
  • site
    LOT 16
    Bode Model 150VP Powered Welding Positioner with Pendant Control.
    Table Area 1530mm x 1530mm. Max Load 7.5 Tons. S/No M27866
    Sale has ended
  • site
    LOT 17
    Richards 8' Double Column Elevating Rail Vertical Boring & Turning Machine.
    Diameter of Table 2438mm. (96") Maximum Diameter Swing Approx 2743mm. Approx Maximum Distance from Chuck to Underside of Cross Slide 1524mm.
    Sale has ended
  • site
    LOT 18
    Stanko Model 2K636 Table Type Horizontal Boring, Facing & Milling Machine. With Acu-Rite 3 Axis DRO
    Spindle Diameter 125mm. Facing Head Dia 800mm. Rotary Table Area 1800mm x 1600mm. Spindle Nose No6 Morse Taper. S/No 28 - 1976
    Sale has ended
  • site
    LOT 19
    XYZ Model KRV SLV 3000 CNC Turret Milling Machine with Proto-Trak MX2 Control
    Table 1473mm x 305mm. Spindle Nose 40 ISO. Speeds 70 - 3600 RPM. S/No 6920
    Sale has ended
  • site
    LOT 20
    Mercedes Benz Model C220 D Sport Diesel Estate Car - PK65 NXM - First Registered 23 November 2015
    Manual Gearbox. Odometer Reading 32923 Miles. With Garmin Map Pilot Satellite Navigation. Power Tailgate. Colour Polar White. Interior Black Artico Leather. THIS VEHICLE SALE WILL NOT BE SUBJECT TO VAT.
    Sale has ended
  • site
    LOT 21
    Ford Transit 100 T250 FWD Panel Van - PX12 RMV - First Registered 2 March 2012
    Diesel Engine 2198cc. Odometer Reading 43690 Miles. MOT Until 26-1-2017. Colour White - Sign Written.
    Sale has ended
  • site
    LOT 22
    Yale Model GDP 25RDE2185 Diesel Powered Fork Lift Truck
    Max Capacity 2500kg. With Solid Tyres. Side Shift. S/No BP0012. Untested
    Sale has ended
  • site
    LOT 23
    Swift Model 9C Gap Bed Centre Lathe.
    Swing over Bed 990mm Dia x 4500mm B.C. Swing in Gap 1600mm. Swing over Cross Slide 710mm. With 762mm Dia 4 Jaw Chuck / Face Plate. Speeds 7.5 to 450 RPM. S/No 14948
    Sale has ended
  • site
    LOT 24
    Colchester Mascot 1600 Gap Bed Centre Lathe. - Metric Machine.
    Swing over Bed 433mm Dia x 2000mm B.C. Swing in Gap 711mm. Swing over Cross Slide 267mm. With 304mm Dia 3 Jaw Chuck. 400mm Dia 4 Jaw Chuck. S/No 7/0213/13850
    Sale has ended
  • site
    LOT 25
    Colchester Mascot 1600 Gap Bed Centre Lathe with 2 Axis DRO - Metric Machine.
    Swing over Bed 433mm Dia x 2000mm B.C. Swing in Gap 711mm. Swing over Cross Slide 267mm. With 304mm Dia 3 Jaw Chuck. 400mm Dia 4 Jaw Chuck. S/No LMT80GMRJX/17433
    Sale has ended
  • site
    LOT 26
    Colchester Mascot 1600 Gap Bed Centre Lathe. - Imperial Machine.
    Swing over Bed 433mm Dia x 2000mm B.C. Swing in Gap 711mm. Swing over Cross Slide 267mm. With 304mm Dia 3 Jaw Chuck. 400mm Dia 4 Jaw Chuck. S/No 7/0006/10329
    Sale has ended
  • site
    LOT 27
    Butler 14" Vertical Slotting Machine
    Stroke Adjustable 100mm to 355mm (4" to 14"). With 990mm (39") Rotary Table. Throat 825mm.
    Sale has ended
  • site
    LOT 28
    Kendall & Gent Double Column Plano Milling Machine
    With Vertical Milling Head & Side Milling Head. Table Area Approx 2736mm x 1111mm. Vertical Traverse of Cross Slide 1219mm. Cross Travel of Vertical Milling Head 1371mm. Max Distance from Table to Cross Rail 1371mm. Distance Between Col...
    Sale has ended
  • site
    LOT 29
    Lumsden Model 94ML Rotary Table Vertical Spindle Surface Grinding Machine
    Tee Slotted Table Diameter 1828mm (72") With Segmental Type Grinding Wheel. With Coolant & Magnetic Filtration Unit. S/No 94ML/5/11326
    Sale has ended
  • site
    LOT 30
    Cincinnati Model 315-16-VERT-EDO Vertical Milling Machine
    Table Area 1740mm x 412mm. Spindle Nose 50 Int. Speeds 16 to 1600 RPM. With Power Feeds & Rapids. S/No 11A3V5WE-11
    Sale has ended
  • site
    LOT 31
    Heckert Type FSS 400-VI/2 Vertical Milling Machine
    Swivelling Vertical Head. Table Area 1800mm x 460mm. Spindle Nose 50 Int. Speeds 45 to 2240 RPM. With Power Feeds & Rapids. S/No 32462062
    Sale has ended
  • site
    LOT 32
    Kitchen & Wade Model E28 - 8' Radial Arm Drilling Machine with Box Table
    With Power Rise & Fall Arm. Spindle Brake. Speeds 20 to 800 RPM. Spindle Nose No 6 Morse Taper. Throat Approx 2200mm. Box Table 1524mm x 900mm x 628mm High. With Coolant. S/No 15594
    Sale has ended
  • site
    LOT 33
    Morgan Rushworth Powered 3 Roll Pyramid Bending Rolls
    Length of Rolls 1250mm. Approx Roll Diameters 125mm.
    Sale has ended
  • site
    LOT 34
    Bode - Pair of Bode SAR 400 Self Aligning Welding Rotators - Powered & Idler Rolls - For Track Mounting
    Wheel Diameters Approx 381mm - (15"). Pendant Control. Capacity 20 Tons. S/No M22385
    Sale has ended
  • site
    LOT 35
    Bode - Pair of Bode SAR 200 Self Aligning Welding Rotators - Powered & Idler Rolls. Floor Mounted
    Wheel Diameters Approx 381mm - (15") x 127mm Wide. Pendant Control. Capacity 10 Tons. S/No M27048
    Sale has ended
  • site
    LOT 36
    Asquith Model OD1 4' Radial Arm Drilling Machine with Box Table
    With Power Rise & Fall Arm. Spindle Brake. Speeds 58 to 1550 RPM. Spindle Nose No 5 Morse Taper. Box Table 1060mm x 835mm x 500mm High. S/No 10330
    Sale has ended
  • site
    LOT 37
    Startrite Model 24V-10 Vertical Band Sawing Machine with Blade Welder
    Throat 609mm (24"). Table 482mm x 482mm. S/No 71080
    Sale has ended
  • site
    LOT 38
    Ingersoll Rand SSR ML18.5 Packaged Air Compressor
    Sale has ended
  • site
    LOT 39
    Ingersoll Rand SSR ML18.5 Packaged Air Compressor
    Sale has ended
  • site
    LOT 40
    Ingersoll Rand TMS 55 Compressed Air Dryer
    With Filters
    Sale has ended
  • site
    LOT 41
    Lincoln Electric Powertec 505S Mig Welding Machine with Lincoln LF24M Pro Wire Feed
    S/No P1120102460
    Sale has ended
  • site
    LOT 42
    Lincoln Electric Powertec 505S Mig Welding Machine with Lincoln LF24M Wire Feed
    S/No P1140600986
    Sale has ended
  • site
    LOT 43
    Lincoln Electric Idealarc CV505 Mig Welding Machine with Lincoln LF33W Wire Feed
    S/No P1130103432
    Sale has ended
  • site
    LOT 44
    Esab AristoMig 500W Mig Welding Machine with Esab 3004 Wire Feed
    S/No 524-626-8838
    Sale has ended
  • site
    LOT 45
    Lincoln Electric Invertec V270 TP Tig Welding Machine Mounted on Hand Trolley
    S/No 1212??
    Sale has ended
  • site
    LOT 46
    TecArc TIG256T DC Tig Welding Machine Mounted on Hand Trolley
    S/No IEC974-1
    Sale has ended
  • site
    LOT 47
    Kemppi Master Tig MLS 3003ACDC Tig Welding Machine Mounted on Hand Trolley
    Sale has ended
  • site
    LOT 48
    Esab LKB 320 Mig Welding Machine with Wire Feed
    S/No 521-738-8146
    Sale has ended
  • site
    LOT 49
    Hypertherm Powermax 85 Plasma Cutting Machine Mounted on Hand Trolley
    S/No 85-020879
    Sale has ended
  • site
    LOT 50
    Hancock Gas Profile Cutting Machine with Westinghouse HL-90 Co-Ordinate Drive Tracing System
    Approx Pattern Area 2000mm x 1300mm. S/No MG3 865 85
    Sale has ended
  • site
    LOT 51
    Multi-AS Arc Type Stud Welding Machine with Hand Studwelding Gun
    S/No 94 667
    Sale has ended
  • site
    LOT 52
    Motorised Welding Positioner. Powered Rotate / Hand Tilt
    Table Diameter 820mm.
    Sale has ended
  • site
    LOT 53
    Hand Operated Bending Rolls - 3 Rolls
    Length Approx 1050mm (42") Diameter of Role Approx 75mm.
    Sale has ended
  • site
    LOT 54
    F J Edwards Hand Operated Straight Folding Machine
    Capacity: Length 1880mm (6' 2") x 14g
    Sale has ended
  • site
    LOT 55
    Guyson Model Super 6 Blast Cleaning Cabinet with Guyson Dust Extractor
    Approx Internal Dimensions: 900mm x 700mmx 700mm. S/No A16526
    Sale has ended
  • site
    LOT 56
    Guyson Model Super 6 Blast Cleaning Cabinet with Guyson Dust Extractor
    Approx Internal Dimensions: 900mm x 700mmx 700mm. S/No A16526
    Sale has ended
  • site
    LOT 57
    Quantity of Press Brake / Bending Tooling - Selection of Top & Bottom Tooling
    Suitable for Lots 5 & 11
    Sale has ended
  • site
    LOT 58
    John Smith 5 Tonne Electric Over Head Travelling Crane.
    Twin Beam Travelling Crane. With Electric Wire Hoist, Pendant Operated. Crane Span Approx 11.2M. No C5 S/No1991-H522. Untested.
    Sale has ended
  • site
    LOT 59
    John Boyd & Co 10 Ton Electric Over Head Travelling Crane.
    Twin Beam Travelling Crane. With Electric Wire Hoist, Pendant Operated. Crane Span Approx 14M. No C1 Untested.
    Sale has ended
  • site
    LOT 60
    John Boyd & Co 10 Ton Electric Over Head Travelling Crane.
    Twin Beam Travelling Crane. With Electric Wire Hoist, Pendant Operated. Crane Span Approx 14M. No C3 Untested.
    Sale has ended
  • site
    LOT 61
    Kearns Model D5 Table Type Horizontal Boring, Facing & Milling Machine.
    Spindle Diameter 127mm (5") Facing Head Dia 812mm. Top Table Area 1524mm x 1524mm. Main Table Area 2133mm x 1219mm. Spindle Nose No6 Morse Taper. S/No 5428
    Sale has ended
  • site
    LOT 62
    Adcock & Shipley 36" Radial Arm Drilling Machine with Box Table
    With Rise & Fall Arm. Speeds 96 to 1500 RPM. Spindle Nose No 3 Morse Taper. Box Table 500mm x 500mm x 600mm High. S/No 376B 36"SV.140
    Sale has ended
  • site
    LOT 63
    W Muir 6" Vertical Slotting Machine
    Stroke 152mm. With 300mm Rotary Table. Throat 254mm. M/c No 467
    Sale has ended
  • site
    LOT 64
    Archdale Twist Drill Grinding Machine.
    Max Capacity Approx 75mm (3") with 228mm Dia Grinding Wheel. 2 Jaw Chuck. S/No DG293
    Sale has ended
  • site
    LOT 65
    Excell Vertical Spindle Swing Type Surface Grinding Machine
    Cup Wheel Dia Approx 177mm. With 260mm x 130mm Magnetic Chuck. S/No 133402
    Sale has ended
  • site
    LOT 66
    Wickman Single Wheel Bench Grinder
    Wheel Dia Approx 152mm (6")
    Sale has ended
  • site
    LOT 67
    Double Ended Pedestal Tool Grinding Machine
    Approx Wheel Size 355mm Diameter x 50mm Wide. (14" x 2")
    Sale has ended
  • site
    LOT 68
    Double Ended Tool Grinding Machine Mounted on Pedestal
    Approx Wheel Size 200mm Diameter x 19mm Wide. (8" x 3/4")
    Sale has ended
  • site
    LOT 69
    Cast Iron Surface Table Mounted on Fabricated Base
    Approx Dimensions: 4300mm x 1540mm x 260mm Thick. Height from Floor 725mm
    Sale has ended
  • site
    LOT 70
    Cast Iron T Slotted Table Mounted on Fabricated Base
    (Ex Machine Table) Approx Dimensions: 3657mm x 1676mm x 127mm Thick. Height from Floor 787mm
    Sale has ended
  • site
    LOT 71
    Cast Iron T Slotted Round Table / Plate
    (Used as a Fixture on Lot 29 Lumsden) 1300mm Diameter x 350mm Thick
    Sale has ended
  • site
    LOT 72
    Meddings Model MF4 Pillar Drilling Machine
    Spindle No 2 Morse Taper. Speeds 80 to 4000 RPM. Table Area Approx 279mm x 254mm. Throat 190mm. S/No 031818
    Sale has ended
  • site
    LOT 73
    Double Ended Pedestal Tool Grinding Machine
    Approx Wheel Size 254mm Diameter x 32mm Wide. (10" x 1.25")
    Sale has ended
  • site
    LOT 74
    Cast Iron Surface Table Mounted on 6 Cast Iron Legs
    Approx Dimensions: 1835mm x 1220mm x 860mm Height from Floor
    Sale has ended
  • site
    LOT 75
    Cast Iron T Slotted Floor Plate
    Approx Dimensions: 5000mm x 3000mm x 410mm Thick.
    Sale has ended
  • site
    LOT 76
    Cast Iron T Slotted Round Table / Plate Mounted on Fabricated Base
    (Used as Welding Table) 1830mm Diameter x 375mm Thick. Height from Floor 890mm
    Sale has ended
  • site
    LOT 77
    Cast Iron T Slotted Box Table Mounted on Fabricated Frame
    Box Approx Dimensions: 1070mm x 830mm x 500mm.
    Sale has ended
  • site
    LOT 78
    Cast Iron T Slotted Round Table / Plate Mounted on Fabricated Base
    (Used as Welding Table) 1760mm Diameter x 95mm Thick. Height from Floor 700mm
    Sale has ended
  • site
    LOT 79
    Cast Iron T Slotted Round Table / Plate Mounted on Fabricated Base
    (Used as Welding Table) 2290mm Diameter x 50mm Thick. Height from Floor 785mm
    Sale has ended
  • site
    LOT 80
    Cast Iron Surface Table with T Slotted Right Angle Plate Attached Mounted on Fabricated Base
    Approx Dimensions: 1530mm x 915mm x 880mm Height from Floor
    Sale has ended
  • site
    LOT 81
    Startrite Model EFI Pillar Drilling Machine
    Spindle No 3 Morse Taper. Speeds 80 to 2800 RPM. Table Area Approx 390mm x 300mm. Throat 300mm.
    Sale has ended
  • site
    LOT 82
    Startrite Meba Horizontal Band Sawing Machine
    Capacity 254mm (10"). With Mitring Vice.
    Sale has ended
  • site
    LOT 83
    Open Topped Shipping Container. Used for Storage
    Approx Dimensions: 6000mm x 2300mm x 2600mm High. - No Contents
    Sale has ended
  • site
    LOT 84
    Fork Lift Type 2 Man Access Platform
    SWL 300kg. S/No 100419 - 2010 - Untested
    Sale has ended
  • site
    LOT 85
    Mobile Fork Lift Type Tipping Waste / Swarf Skip
    Approx Dimensions: 1400mm x 900mm x 850mm Deep
    Sale has ended
  • site
    LOT 86
    Mobile Fork Lift Type Tipping Waste / Swarf Skip
    Approx Dimensions: 1400mm x 900mm x 850mm Deep
    Sale has ended
  • site
    LOT 87
    Quantity of Metal Stock - With 16 off Double Sided Bar Racks & 2 off Metal Racks
    Includes: Tube - Angle - Various Box Section - Inspection Recommended
    Sale has ended
  • site
    LOT 88
    Ajax Model AJPD25 Pillar Drilling Machine
    Hand Feed. Spindle No 2 Morse Taper. Speeds 125 to 1820 RPM. Swivel Table Area Approx 405mm x 360mm. Throat 250mm. S/No 57544
    Sale has ended
  • site
    LOT 89
    Luke & Spencer Model M7 Double Ended Pedestal Tool Grinding Machine
    Approx Wheel Size 355mm Diameter x 50mm Wide. (14" x 2")
    Sale has ended
  • site
    LOT 90
    Blacksmiths Cast Iron Anvil
    Sale has ended
  • site
    LOT 91
    Blacksmiths Cast Iron Anvil
    Sale has ended
  • site
    LOT 92
    Drayton Super 1500 Mobile Steam Cleaner
    Diesel Fuel Heater - 110 Volts Single Phase
    Sale has ended
  • site
    LOT 93
    Numatic Model WVD2000-2 Mobile Vacuum Cleaner
    2400W - 110 Volts Single Phase. S/No 144023370
    Sale has ended
  • site
    LOT 94
    Esab Model LHE400 Mobile Electric Arc Welding Machine
    Capacity 400 Amps. S/No 000159
    Sale has ended
  • site
    LOT 95
    BOC IMP Mobile Straight Line Gas Cutting Tractor with 4 Sections of Track
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 96
    Electac Portable Welding Fume Extractor with Articulated / Flexible Extractor Ducting
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 97
    Electac Portable Welding Fume Extractor with Articulated / Flexible Extractor Ducting
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 98
    Nederman Portable Welding Fume Extractor with Flexible Extractor Ducting
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 99
    Nederman Portable Welding Fume Extractor with Flexible Extractor Ducting
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 100
    Plain Machine Vice - 300mm Wide
    Sale has ended
  • site
    LOT 101
    Duplex Tool Post Grinding Attachment
    Wheel Size Approx 400mm x 50mm. With 5 H.P. Motor. S/No 86173
    Sale has ended
  • site
    LOT 102
    Duplex Tool Post Grinding Attachment
    Wheel Size Approx 200mm x 25mm. With 5 H.P. Motor. S/No 71363
    Sale has ended
  • site
    LOT 103
    Duplex Type D31B Tool Post Grinding Attachment
    Wheel Size Approx 200mm x 25mm. S/No 38088
    Sale has ended
  • site
    LOT 104
    Crown T Slotted Sine Table
    10" Roller Centres. Table Area 305mm x 200mm. S/No 488
    Sale has ended
  • site
    LOT 105
    Magnetic Systems Magnetic Chuck /Table
    Approx Dimensions: 600mm x 200mm
    Sale has ended
  • site
    LOT 106
    Magnetic Systems Magnetic Chuck /Table
    Approx Dimensions: 600mm x 200mm
    Sale has ended
  • site
    LOT 107
    Magnetic Chuck /Table
    Approx Dimensions: 600mm x 200mm
    Sale has ended
  • site
    LOT 108
    Magnetic Chuck /Table
    Approx Dimensions: 500mm x 200mm
    Sale has ended
  • site
    LOT 109
    Plain Machine Vice - 210mm Wide
    Sale has ended
  • site
    LOT 110
    Plain Machine Vice - 210mm Wide
    Sale has ended
  • site
    LOT 111
    Plain Machine Vice - 155mm Wide
    Sale has ended
  • site
    LOT 112
    Excell Swivelling & Tilting Machine Vice - 160mm Wide
    Sale has ended
  • site
    LOT 113
    Rotary Table - 255mm Diameter
    Sale has ended
  • site
    LOT 114
    CVA Kearney & Trecker Milwaukee Dividing Head & Tail Stock
    Centre Height Approx 125mm. With 130mm Dia 3 Jaw Chuck
    Sale has ended
  • site
    LOT 115
    Cincinnati Dividing Head
    Centre Height Approx 125mm. With 150mm Dia 3 Jaw Chuck
    Sale has ended
  • site
    LOT 116
    Vertex Boring & Facing Attachment with 40 Int Drive & Accessories - Boxed
    Sale has ended
  • site
    LOT 117
    Cast Iron T Slotted Plate on 4 Legs with 150mm Wide Swivelling Bench Vice
    Table Area Approx 830mm x 830mm. Height from Floor 650mm.
    Sale has ended
  • site
    LOT 118
    WMW Heckert Dividing Rotary Table with Power Input Shaft. - 310mm Diameter
    Sale has ended
  • site
    LOT 119
    Cast Iron Surface Plate on Fabricated Metal Stand
    Plate Area Approx 770mm x 455mm. Height from Floor 890mm.
    Sale has ended
  • site
    LOT 120
    Three Jaw Lathe Chuck - 460mm Diameter
    Sale has ended
  • site
    LOT 121
    Alfra Rotabest 100 Type EHB 32 /4.3.1A Magnetic Base Portable Drilling Machine - Boxed
    110 Volts Single Phase. No 10 07 5003
    Sale has ended
  • site
    LOT 122
    Draper Model LLK5A Laser Level Kit - With Tripod Boxed
    Sale has ended
  • site
    LOT 123
    Hilti WS230 9" Angle Grinder - Boxed
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 124
    Dynafor Digital Load Indicator - Boxed
    Max 25 Tonne - Untested
    Sale has ended
  • site
    LOT 125
    Fein Electric Hand Held Belt Linisher - Boxed
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 126
    Hitachi Model HU14 Abrasive Wheel 355mm Circular Blade Cut Off Saw
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 127
    Bymat RS1024 Polishing & Cleaning System
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 128
    Rigid Model 1822 Portable Pipe Threading Machine
    Foot Pedal Control. 110 Volts Single Phase
    Sale has ended
  • site
    LOT 129
    Elmo Rietschle Vacuum Pump Mounted on 4 Wheel Trolley
    Sale has ended
  • site
    LOT 130
    SIP Airmate Nimbus 25050 Portable Air Compressor with Air Receiver
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 131
    Easi-Heat Model EH280 Portable Propane Space Heater
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 132
    Easi-Heat Model EH280 Portable Propane Space Heater
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 133
    Tri Tool Inc Model 574E SeverMaster Portable Electric Tube Section Cutter / Beveler with Accessories
    With Bosch GBM 13-2RE Power Tool. With Carry Case - See Photographs for More Information
    Sale has ended
  • site
    LOT 134
    Enerpac Hand Operated Hydraulic Tube / Pipe Bending Machine with Various Formers
    Range 0.5" to 2"
    Sale has ended
  • site
    LOT 135
    Arboga Type FR825 - 24" Radial Arm Drilling Machine with Rise & Fall Arm
    Speeds 100 to 1450 RPM. Spindle Nose No 3 Morse Taper. Table 520mm x 430mm. S/No 136655
    Sale has ended
  • site
    LOT 136
    Gryphon Double Ended Bench Tool Grinding Machine
    Max Wheel Size Approx 150mm Dia x 22mm.
    Sale has ended
  • site
    LOT 137
    Kerry Model H Pillar Drilling Machine
    Hand Feed. Spindle No 3 Morse Taper. Speeds 70 to 1500 RPM. Rise & Fall Table Area Approx 345mm x 345mm. Throat 200mm. S/No 302
    Sale has ended
  • site
    LOT 138
    Ajax Model AJPD25 Pillar Drilling Machine
    Hand Feed. Spindle No 2 Morse Taper. Speeds 125 to 1820 RPM. Swivel Table Area Approx 405mm x 355mm. Throat 250mm. S/No 67549 - 1995
    Sale has ended
  • site
    LOT 139
    Luke & Spencer Model M7 Double Ended Pedestal Tool Grinding Machine
    Approx Wheel Size 400mm Diameter x 50mm Wide. (16" x 2") S/No M7-912
    Sale has ended
  • site
    LOT 140
    Rowland Single Wheel Pedestal Tool Grinding Machine
    Approx Wheel Size 355mm Diameter x 75mm Wide. (14" x 3") S/No 7576M
    Sale has ended
  • site
    LOT 141
    DeVilbiss Dynaclean Spray Booth with Fabricated Sheet Metal Enclosure
    Water Tank Capacity 940 Gallons. With Extraction. Approx Dimension of Enclosure: 6.25M (L to R) x 4.75M (F to B) (3 Sides Only) x 3.6M High. Customers are reminded that all holes in the building must be made good after the removal of this l...
    Sale has ended
  • site
    LOT 142
    Two off Fabricated Sheet Metal Storage Frames Includes Quantity of Various Metal Sheet in Racks & Off Cuts
    Various Type of Metal Including Stainless Steel Sheets. Rack Dimensions Approx 3.6M x 3M x 1.65M High & 3.5M x 2.5M x 1.5M High. Inspection Recommended.
    Sale has ended
  • site
    LOT 143
    Aluminium Sectional Scaffolding / Staging + Aluminium Ladders - Untested.
    Sale has ended
  • site
    LOT 144
    Astra Bench Drilling Machine with Fabricated Work Bench
    Hand Feed. 12mm Drill Chuck. Table Area Approx 235mm x 235mm. Throat 150mm.
    Sale has ended
  • site
    LOT 145
    Power Blasting Shot Blasting Equipment. Includes: Blasting Machine - Extraction System - Shot Recovery - Fabricated Booth (2 Sides Only). Controls.
    Booth Dimension Approx: 5.7M x 4M x 3.5M High. Customers are reminded that all holes in the building must be made good after the removal of this lot.
    Sale has ended
  • site
    LOT 146
    Fabricated Metal Oil Storage Tank Located Outside with Hand Operated Pump.
    Approx Dimensions: 1225mm x 1225mm x 1220mm High
    Sale has ended
  • site
    LOT 147
    Fabricated Metal Diesel Oil Storage Tank Located Outside
    Approx Dimensions: 3210mm x 1225mm x 1225mm High
    Sale has ended
  • site
    LOT 148
    Quantity of Mixer Rotor Shafts with Storage Rack Located Out Side
    Approx 21 off
    Sale has ended
  • site
    LOT 149
    Cast Iron Mixer Body + Fabrication + Sundry Machine Parts - Located Out Side
    Sale has ended
  • site
    LOT 150
    Compressed Air Reciever
    Approx Dimensions: 1800mm High x 900mm Diameter.
    Sale has ended
  • site
    LOT 151
    Cast Iron Mixer Body + Machine Parts + Rotor Shafts - Located Inside
    Sale has ended
  • site
    LOT 152
    Contents of Stores - As Photographs
    Included: Racking, Fasteners, Pipe Fittings, Gaskets, Hydraulic Hoses, Machine Parts, Patterns etc. Inspection Recommended.
    Sale has ended
  • site
    LOT 153
    Motorised Mobile Hydraulic Pump & Tank
    Motor 4kw.
    Sale has ended
  • site
    LOT 154
    Hand Operated Water Pump & Tank
    Sale has ended
  • site
    LOT 155
    Rothenberger RP50 Hand Operated Test Pump & Tank
    Sale has ended
  • site
    LOT 156
    Clarke Parts Wash Tank
    240 Volts Single Phase. Approx Dimensions: 700mm x 480mm x 150mm Deep
    Sale has ended
  • site
    LOT 157
    Cast Iron Mixer Body + Sundry Parts
    Sale has ended
  • site
    LOT 158
    Five off Various Hydraulic Jacks & Sundry Equipment
    Untested
    Sale has ended
  • site
    LOT 159
    Palletower Metal Fabricated Stackable Stillages - Approx 14 off
    Approx Dimensions: 1180mm x 1000mm x 475mm High Each
    Sale has ended
  • site
    LOT 160
    Pratt Type 55 - 4 Jaw Lathe Chuck - 610mm Diameter
    Sale has ended
  • site
    LOT 161
    Box - Quantity of Various Carbide Inserts
    Sale has ended
  • site
    LOT 162
    Box - Quantity of HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 163
    Box - Quantity of HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 164
    Box - Quantity of HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 165
    Box - Quantity of Morse Taper Sleeves + Boring Tool
    Sale has ended
  • site
    LOT 166
    Box - Quantity of HSS Hand Taps
    Sale has ended
  • site
    LOT 167
    Box - Quantity of HSS Hand Taps
    Sale has ended
  • site
    LOT 168
    Box - Quantity of HSS Morse Taper Reamers
    Sale has ended
  • site
    LOT 169
    Box - Quantity of HSS Left Hand - Hand Taps
    Sale has ended
  • site
    LOT 170
    Box - Quantity of HSS BSP Hand Taps
    Sale has ended
  • site
    LOT 171
    Box - Quantity of HSS NPT Hand Taps
    Sale has ended
  • site
    LOT 172
    Box - Quantity of HSS Whitworth Hand Taps
    Sale has ended
  • site
    LOT 173
    Box - Quantity of HSS Whitworth Hand Taps
    Sale has ended
  • site
    LOT 174
    Box - Quantity of HSS Hand Reamers
    Sale has ended
  • site
    LOT 175
    Box - Quantity of HSS BSW Thread Dies
    Sale has ended
  • site
    LOT 176
    Box - Quantity of HSS Metric Thread Dies
    Sale has ended
  • site
    LOT 177
    Box - Quantity of HSS Adjustable Hand Reamers
    Sale has ended
  • site
    LOT 178
    Box - Quantity of HSS UNC/UNF/BSF/BSP Thread Dies
    Sale has ended
  • site
    LOT 179
    Box - Quantity of HSS UNC/UNF Taps
    Sale has ended
  • site
    LOT 180
    Box - Quantity of HSS BSF Taps
    Sale has ended
  • site
    LOT 181
    Box - Quantity of HSS Taps
    Sale has ended
  • site
    LOT 182
    Box - Quantity of HSS Taps
    Sale has ended
  • site
    LOT 183
    Box - Quantity of HSS Taps
    Sale has ended
  • site
    LOT 184
    Box - Quantity of HSS End / Slot Milling Cutters
    Sale has ended
  • site
    LOT 185
    Box - Quantity of HSS End / Slot Milling Cutters
    Sale has ended
  • site
    LOT 186
    Box - Quantity of HSS Morse Taper Long Series Twist Drills
    Sale has ended
  • site
    LOT 187
    Box - Quantity of HSS Morse Taper Twist Drills
    Sale has ended
  • site
    LOT 188
    Pallet - Quantity of Various Plate Lifting Clamps.
    Untested
    Sale has ended
  • site
    LOT 189
    Four off Bosch Model GSB 18-2 Pistol Drills
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 190
    Four off Various Pistol Drills
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 191
    Five off Makita 120mm Electric Angle Grinders
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 192
    Five off Bosch GWS 7-115 - 120mm Electric Angle Grinders
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 193
    Five off Bosch GWS 7-115 - 120mm Electric Angle Grinders
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 194
    Four off Pneumatic Pistol Drills
    Sale has ended
  • site
    LOT 195
    Four off Desouter Pneumatic Sanders
    Sale has ended
  • site
    LOT 196
    Four off Bosch Electric Nibblers
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 197
    Four off Makita 120mm Electric Angle Grinders
    110 Volts Single Phase
    Sale has ended
  • site
    LOT 198
    Box - Four off Pneumatic 1/2" Drive Wrenches
    Sale has ended
  • site
    LOT 199
    Box - Three off Pneumatic Belt Sanders
    Sale has ended
  • site
    LOT 200
    Box - Quantity of Letter / Number Hand Punches
    Sale has ended
  • site
    LOT 201
    HP Designjet T790 Wide Format PostScrpt ePrinter
    S/No CN18K4K02Z - 2011
    Sale has ended
  • site
    LOT 202
    HP Designjet 500 Wide Format Printer - Model C7770B
    S/No SG42461079
    Sale has ended
  • site
    LOT 203
    Konica Minolta Model bizhub C224 Colour Photocopier
    S/No A4FM021029006
    Sale has ended
  • site
    LOT 204
    Brother Model MFC-L2700DW Fax-Scan-Copy Machine
    S/No E73945G5N457097
    Sale has ended
  • site
    LOT 205
    Konica Minolta Model bizhub 250 Photocopier
    S/No 71292663
    Sale has ended
  • site
    LOT 206
    Chubb Safe with Key
    Approx Dimensions: 750mm x 750mm x 1100mm High
    Sale has ended
  • site
    LOT 207
    Milners Fire Resisting Safe
    Approx Dimensions: 650mm x 650mm x 800mm High
    Sale has ended
  • site
    LOT 208
    Board Room Table with Nine off Upholstered Wooden Chairs
    Approx Dimensions: 4630mm x 1550mm (At Widest Point) x 725mm High
    Sale has ended
  • site
    LOT 209
    Table with Seven off Upholstered Metal Frame Chairs + 2 off Sliding Door Wooden Cabinets + 2 Door Wooden Cabinet
    Approx Dimensions of Table: 2060mm x 900mm
    Sale has ended
  • site
    LOT 210
    Eight off Upholstered Wooden Chairs with 3 off Small Wooden Tables - Waiting Area
    Sale has ended
  • site
    LOT 211
    Meeting Room - Two off Tables with Six off Upholstered Wooden Chairs + Long Wooden Cabinet
    Approx Dimensions of Tables: 2060mm x 900mm Each
    Sale has ended
  • site
    LOT 212
    Four off Upholstered Wooden Chairs
    Sale has ended
  • site
    LOT 213
    Two off Wooden Desks Each with Storage Under + 2 off Swivel Office Chairs
    Note: Does Not Include Any IT Equipment.
    Sale has ended
  • site
    LOT 214
    White Board + Flip Chart Stand
    Approx Dimensions: White Board 1800mm x 1200mm. Flip Chart Stand 650mm x 900mm
    Sale has ended
  • site
    LOT 215
    Contents of Small Office - Wooden Table + Upholstered Wooden Chairs
    Sale has ended
  • site
    LOT 216
    Fellows Paper Shredding Machine
    Sale has ended
  • site
    LOT 217
    Contents of Office: Includes Two off Wooden Desks with Corner Unit + 2 off 2 Door Cupboards + 3 & 4 Drawer Wooden Filing Cabinets
    Two Office Chairs
    Sale has ended
  • site
    LOT 218
    Directors Office: Wooden Desk + Upholstered Swivel Chair + Wooden Table + 6 off Wooden Upholstered Chairs + Wooden Sideboard
    Sale has ended
  • site
    LOT 219
    Dell 2335dn Multifunctional Laser Printer
    Sale has ended
  • Image not available
    Image not available
    site
    LOT 220
    Spare Lot
    Sale has ended
  • site
    LOT 221
    Moore & Wright 450mm to 600mm External Micrometer - Boxed
    Sale has ended
  • site
    LOT 222
    Moore & Wright 300mm to 450mm External Micrometer - Boxed
    Sale has ended
  • site
    LOT 223
    Moore & Wright 150mm to 300mm External Micrometer - Boxed
    Sale has ended
  • site
    LOT 224
    SPI 0 to 150mm (0-6") Digital External Micrometer - Boxed
    Sale has ended
  • site
    LOT 225
    Five off Mitutoyo Metric External Micrometers - Boxed Set
    Range: 25 to 50mm / 50 to 75mm / 75 to 100mmm / 100 to 125mm / 125 to 150mm.
    Sale has ended
  • site
    LOT 226
    Mitutoyo Digimatic 0-300mm Digital Vernier - Boxed
    Sale has ended
  • site
    LOT 227
    Mitutoyo Metric Internal "Stick" Micrometer - Boxed Set
    Sale has ended
  • site
    LOT 228
    Mitutoyo Digital Depth Micrometer - Boxed Set
    Sale has ended
  • site
    LOT 229
    Mitutoyo Metric Depth Micrometer - Boxed Set
    Sale has ended
  • site
    LOT 230
    Linear Digi-Met 0-300mm Digital Vernier - Boxed
    Sale has ended
  • site
    LOT 231
    Mitutoyo 0-1550mm (62.5") Vernier - Boxed
    Sale has ended
  • site
    LOT 232
    Mitutoyo 0-1000mm (40") Vernier - Boxed
    Sale has ended
  • site
    LOT 233
    Benson 0-980mm (38") Vernier - Boxed
    Sale has ended
  • site
    LOT 234
    Mitutoyo 12"-13" External Micrometer - Boxed
    Sale has ended
  • site
    LOT 235
    Moore & Wright 16"-17" External Micrometer
    Sale has ended
  • site
    LOT 236
    Moore & Wright 300mm to 325mm External Micrometer
    Sale has ended
  • site
    LOT 237
    Box - Quantity of Various Metric Micrometers - Mostly Mitutoyo
    Sale has ended
  • site
    LOT 238
    Box - Quantity of Various Imperial Micrometers - Mostly Mitutoyo
    Sale has ended
  • site
    LOT 239
    Starratt 13"-14" External Micrometer - Boxed
    Sale has ended
  • site
    LOT 240
    Starratt 14"-15" External Micrometer - Boxed
    Sale has ended
  • site
    LOT 241
    Contents of Welding Stores
    Welding Rods.Welding Wire. Flux etc.
    Sale has ended
  • site
    LOT 242
    Box - Six Argon Gas Regulators
    Sale has ended
  • site
    LOT 243
    Box - Six BOC Gas Regulators
    Sale has ended
  • site
    LOT 244
    Box - Six BOC Gas Regulators
    Sale has ended
  • site
    LOT 245
    Box - Five Pressure Guages
    Sale has ended
  • site
    LOT 246
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 247
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 248
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 249
    Box - HSS Straight Shank Twist Drills
    Sale has ended
  • site
    LOT 250
    Machine Spirit Level and Angular Level
    Sale has ended
  • site
    LOT 251
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 252
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 253
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 254
    Box - HSS Hand Taps
    Sale has ended
  • site
    LOT 255
    Box - HSS Hand Taps
    Sale has ended
  • site
    LOT 256
    Box - HSS Hand Taps
    Sale has ended
  • site
    LOT 257
    Box HSS Morse Taper Shank Reamers
    Sale has ended
  • site
    LOT 258
    Box HSS Morse Taper Shank Reamers
    Sale has ended
  • site
    LOT 259
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 260
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 261
    Box - Two HSS Morse Taper Shank Twist Drills
    229/32" & 31/16" Dia.
    Sale has ended
  • site
    LOT 262
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 263
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 264
    Box - HSS End & Slot Mills
    Sale has ended
  • site
    LOT 265
    Box - HSS End & Slot Mills
    Sale has ended
  • site
    LOT 266
    Box - Four Carbide Insert Milling Cutters
    Sale has ended
  • site
    LOT 267
    Box - Three Pneumatic Inserter Guns
    Sale has ended
  • site
    LOT 268
    Three - 120mm Angle Grinders
    110 Volt Supply
    Sale has ended
  • site
    LOT 269
    Two - Bosch Heavy Duty Hand Drills
    110 Volt Supply
    Sale has ended
  • site
    LOT 270
    Three - Bosch 180mm Angle Grinders
    110 Volt Supply
    Sale has ended
  • site
    LOT 271
    Bosch 230mm Angle Grinder
    110 Volt Supply
    Sale has ended
  • site
    LOT 272
    Two - Bosch 230mm and 180mm Angle Grinders
    110 Volt Supply
    Sale has ended
  • site
    LOT 273
    One - Bosch Hand Grinder . Two Bosch Drivers
    110 Volt Supply
    Sale has ended
  • site
    LOT 274
    AEG Angle Grinder
    110 Volt Supply
    Sale has ended
  • site
    LOT 275
    Box - Five Gas Regulators
    Sale has ended
  • site
    LOT 276
    Box - Seven Gas Regulators
    Sale has ended
  • site
    LOT 277
    Box - Welding Hose and Gas Nozzles
    Sale has ended
  • site
    LOT 278
    Pallet - 110 Volt Connection Boxes and Lighting
    Sale has ended
  • site
    LOT 279
    Pallet - Quantity of Workshop Inspection Equipment
    Internal/External Micrometers. Depth Micrometers Etc.
    Sale has ended
  • site
    LOT 280
    Pallet - Redman Press Brake Punch Tooling
    Sale has ended
  • site
    LOT 281
    Virax Hand Operated Tube Bender
    1/2" - 2" Capacity
    Sale has ended
  • site
    LOT 282
    RotaBroach Magnetic Base Drill
    110 Volt Supply
    Sale has ended
  • site
    LOT 283
    Four - Pneumatic Inserter Guns. Avdel & Clarke
    Sale has ended
  • site
    LOT 284
    Makita Model 6802 110 Volt Drive Gun
    Sale has ended
  • site
    LOT 285
    Two - Rotostock 2" Die Heads
    Sale has ended
  • site
    LOT 286
    Hand Operated Banding/ Strapping Machine
    Sale has ended
  • site
    LOT 287
    Ikar 136Kg Fall Arrest Block. Serial No. 883082 (2015)
    Max Lifting Height 42 Metres. Untested
    Sale has ended
  • site
    LOT 288
    County Scales Model PS105 Digital Weigh Scales
    Capacity 60Kg x 0.01g
    Sale has ended
  • site
    LOT 289
    Mighty Seven Pneumatic Pistol Drill
    Boxed
    Sale has ended
  • site
    LOT 290
    Two - Pneumatic Chisel Guns. SIP & Sealey
    Boxed
    Sale has ended
  • site
    LOT 291
    Pneumatic Torque Drive Gun & Sockets
    Boxed
    Sale has ended
  • site
    LOT 292
    Two - 110 Volt Pistol Drills
    Sale has ended
  • site
    LOT 293
    Two - Morse Taper Shank Tapping Heads. Rotaquick & MTZ.
    M10 - M20 Capacity
    Sale has ended
  • site
    LOT 294
    Bosch Model GSB 18 Pistol Drill
    Boxed. 110 Volt Supply
    Sale has ended
  • site
    LOT 295
    Clarke Pneumatic Chisel Gun
    Sale has ended
  • site
    LOT 296
    Audit Model 100 Ultrasonic Thickness Gauge
    Boxed
    Sale has ended
  • site
    LOT 297
    Elcometer Model 355 Ultrasonic Thickness Guage
    Boxed
    Sale has ended
  • site
    LOT 298
    Nine - Chain Ratchet Blocks
    Untested
    Sale has ended
  • site
    LOT 299
    Quantity - Nylon Lifting Strops. Shackles & Eyebolts
    Untested
    Sale has ended
  • site
    LOT 300
    Contents of Stores - As Photographs
    Fasteners . Gasket Material Etc.
    Sale has ended
  • site
    LOT 301
    Three - Carver G Clamps
    Sale has ended
  • site
    LOT 302
    Bosch Model GST 60 Jig Saw
    Boxed. 110 Volt Supply
    Sale has ended
  • site
    LOT 303
    Bosch Model GSB 18 Pistol Drill
    Boxed. 110 Volt Supply
    Sale has ended
  • site
    LOT 304
    Salter Model 299 5000Kg Crane Weigh Scale
    Untested
    Sale has ended
  • site
    LOT 305
    Pallet - Three Angle Plates
    Sale has ended
  • site
    LOT 306
    Six - Vee Blocks
    Sale has ended
  • site
    LOT 307
    Four - Faceplate Type Chuck Jaws
    Sale has ended
  • site
    LOT 308
    Three - Welding Screens
    Approx. Dimensions 1800mm x 1800mm
    Sale has ended
  • site
    LOT 309
    Gas Bottle Trolley. Burning Gun .Guages and Hose
    Sale has ended
  • site
    LOT 310
    Gas Bottle Trolley. Burning Gun .Guages and Hose
    Sale has ended
  • site
    LOT 311
    Gas Bottle Trolley. Burning Gun .Guages and Hose
    Sale has ended
  • site
    LOT 312
    Gas Burning Gun Gauges and Hose
    Sale has ended
  • site
    LOT 313
    Two - Mobile Access Steps
    Sale has ended
  • site
    LOT 314
    Record No. 24 Quick Release Engineers Bench Vice
    Jaw Width 135mm
    Sale has ended
  • site
    LOT 315
    Record No. 25 Quick Release Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 316
    Woden No.8 Quick Release Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 317
    Record No. 25 Quick Release Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 318
    Rack - Quantity of Lifting Chains and Plate Lifters
    Untested
    Sale has ended
  • site
    LOT 319
    Woden Quick Release Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 320
    Record No.112 Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 321
    Cast Iron T Slotted Table Mounted on Fabricated Base
    Dimensions :- 1850mm x 690mm x 100mm Thick. Height from floor 930mm
    Sale has ended
  • site
    LOT 322
    Cast Iron T Slotted Table Mounted on Fabricated Base
    Dimensions :- 1735mm x 410mm x 150mm Thick. Height from floor 865mm
    Sale has ended
  • site
    LOT 323
    Fabricated Steel Metal Table
    Dimensions :- 2510mm x 1260mm x Height from floor 900mm
    Sale has ended
  • site
    LOT 324
    Fabricated Steel Metal Table
    Dimensions :- 2510mm x 1260mm x Height from floor 900mm
    Sale has ended
  • site
    LOT 325
    Fabricated Steel Metal Table
    Dimensions :- 2435mm x 1220mm x Height from floor 935mm
    Sale has ended
  • site
    LOT 326
    Cast Iron T Slotted Table Mounted on Fabricated Base
    Dimensions :- 3660mm x 1170mm x 120mm Thick. Height from floor 865mm
    Sale has ended
  • site
    LOT 327
    Two Door Metal Cupboard
    Dimensions: 1220mm x 540mm x 1830mm High
    Sale has ended
  • site
    LOT 328
    Metal Workbench
    Dimensions :- 1810mm x 900mm x Height from floor 925mm
    Sale has ended
  • site
    LOT 329
    Single Door Metal Cupboard
    Dimensions: 610mm x 440mm x 1300mm High
    Sale has ended
  • site
    LOT 330
    Record No. 23 Quick Release Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 331
    Record No.6 Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 332
    Record No.6 Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 333
    Single Door Metal Cupboard
    Dimensions: 610mm x 310mm x 1070mm High
    Sale has ended
  • site
    LOT 334
    Record No. 25 Quick Release Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 335
    Record No.6 Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 336
    Cast Iron Table Mounted on Fabricated Base
    Dimensions :- 2290mm x 1040mm x 180mm Thick. Height from floor 810mm
    Sale has ended
  • site
    LOT 337
    Fabricated Steel Metal Table
    Dimensions :- 2510mm x 1260mm x Height from floor 935mm
    Sale has ended
  • site
    LOT 338
    Cast Iron T Slotted Table Mounted on Fabricated Base
    Dimensions :- 1375mm x 845mm x 150mm Thick. Height from floor 890mm
    Sale has ended
  • site
    LOT 339
    Record No. 24 Quick Release Engineers Bench Vice
    Jaw Width 135mm
    Sale has ended
  • site
    LOT 340
    Record No. 24 Quick Release Engineers Bench Vice
    Jaw Width 135mm
    Sale has ended
  • site
    LOT 341
    Quantity of Steelwork RSJ Section
    In two locations - Internal and in outside Yard
    Sale has ended
  • site
    LOT 342
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 343
    Box - HSS Morse Taper Shank Twist Drills
    Sale has ended
  • site
    LOT 344
    Box - Four Webster & Bennett Chuck Jaws
    Sale has ended
  • site
    LOT 345
    Work Clamp Set
    Sale has ended
  • site
    LOT 346
    Three Vernier Height Guages
    Two x 1000mm One 600mm
    Sale has ended
  • site
    LOT 347
    Three Engineers Set Squares
    Two x 1000mm One 300mm
    Sale has ended
  • site
    LOT 348
    Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 349
    Record No.6 Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 350
    Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 351
    Record No.6 Engineers Bench Vice
    Jaw Width 150mm
    Sale has ended
  • site
    LOT 352
    Record No. 24 Quick Release Engineers Bench Vice
    Jaw Width 135mm
    Sale has ended
  • site
    LOT 353
    150mm Machine Vice
    Sale has ended
  • site
    LOT 354
    Sealey 2000Kg Pallet Truck
    Untested
    Sale has ended
  • site
    LOT 355
    Britruck 2000Kg Pallet Truck
    Untested
    Sale has ended
  • site
    LOT 356
    Contents of Store Room
    Pipe Fittings. Gasket Material. Lagging
    Sale has ended
  • site
    LOT 357
    Record No 22 Tube Bender and Vice
    Sale has ended
  • site
    LOT 358
    Fork Lift Truck Fork Extensions
    Length 2000mm
    Sale has ended
  • site
    LOT 359
    Fork Lift Truck Fork Extensions
    Length 2000mm
    Sale has ended
  • site
    LOT 360
    Draper Model BC 15 Battery Charger
    12 & 24 Volt
    Sale has ended
  • site
    LOT 361
    Single Beam Overhead Travelling Crane
    Span 11700mm Approx. 2 ton Capacity.(untested) Pendant Controls. Chain hand feed to cross travel.
    Sale has ended
  • site
    LOT 362
    Overhead Twin Beam Travelling Crane with Cab Controls
    Span 6600mm Approx (untested)
    Sale has ended
  • site
    LOT 363
    Wall Mounted Jib Crane
    With 1/2 ton Chain hoist (untested) Span 3800mm Approx.
    Sale has ended
  • site
    LOT 364
    Wall Mounted Jib Crane
    With 1/2 ton Chain hoist (untested) Span 3500mm Approx.
    Sale has ended
  • site
    LOT 365
    Wall Mounted Jib Crane
    With 1/2 ton Chain hoist (untested) Span 3250mm Approx.
    Sale has ended
  • site
    LOT 366
    Quantity of Wooden Patterns
    Sale has ended
  • site
    LOT 367
    Metal Filter Cabinet and Filters
    Sale has ended
  • site
    LOT 368
    Motorised Power Converter
    Input 400/440 volt. Output 127 Volts 10 Kva . 45 Amps
    Sale has ended
  • site
    LOT 369
    Four Dell Computers with Key Boards and Monitors
    Sale has ended
  • site
    LOT 370
    Four Computers with Key Boards and Monitors
    Sale has ended
  • site
    LOT 371
    Four - Office Desks and Chairs. Two two door Metal Cabinets and eight draw Cabinet
    Sale has ended
  • site
    LOT 372
    Two - Office Desks and Chairs and Wooden Cabinet
    Sale has ended
  • site
    LOT 373
    Contents of Office
    Includes : Desk and Chair. Three Metal Cupboards. Two metal Filing Cabinets and Fifteen Draw Cabinet
    Sale has ended
  • site
    LOT 374
    Contents of Office
    Includes : Two Desks and Chairs
    Sale has ended
  • site
    LOT 375
    Chubb Fire Safe with Keys
    Approx. Dimensions 735mm x 665mm x 1840mm High
    Sale has ended
  • site
    LOT 376
    Contents of Office
    Includes : Desk, Chair and Side Table
    Sale has ended
  • site
    LOT 377
    Contents of Office
    Includes : Desk, Chair and Two Door Wooden Cabinet and Wardrobe Type Unit
    Sale has ended
  • site
    LOT 378
    Contents of Office
    Includes : Desk,Chair, Two Four Draw and One Three Draw Filing Cabinet
    Sale has ended
  • site
    LOT 379
    Four Dell Computers with Key Boards and Monitors
    Sale has ended
  • site
    LOT 380
    Del Computer, Monitor, Keyboard and HP Printer
    Sale has ended
  • site
    LOT 381
    Seven - 15 Draw A4 Size Storage Cabinets
    Sale has ended
  • site
    LOT 382
    Contents of Office
    Includes : Desk,Chair, Three Four Draw Filing Cabinets, Two Wooden Cabinets and one Wardrobe Type Unit
    Sale has ended
  • site
    LOT 383
    Contents of Office
    Includes : Desk,Chair, Table and four Chairs.Side Table. Two Wooden Cabinets and one wardrobe Type Unit
    Sale has ended
  • site
    LOT 384
    Contents of Office
    Includes : Four Desks. Five Chairs.Two Side Tables. Three Wooden sliding door Cabinets.Five Metal Filing Cabinets
    Sale has ended
  • site
    LOT 385
    Contents of Main Office
    Includes : Approx 20 Desks. 8 Chairs, 3 Two Door Metal Cupboards,3 Two Draw Metal filing Cabinets
    Sale has ended
  • site
    LOT 386
    Monarch Metal Drawing Storage Cabinet
    Sale has ended
  • site
    LOT 387
    Monarch Metal Drawing Storage Cabinet
    Sale has ended
  • site
    LOT 388
    Monarch Metal Drawing Storage Cabinet
    Sale has ended
  • site
    LOT 389
    Monarch Metal Drawing Storage Cabinet
    Sale has ended
  • site
    LOT 390
    Six Draw Wooden Drawing Storage Cabinet
    Sale has ended
  • site
    LOT 391
    Three - Four Draw Metal Drawing Storage Cabinets
    Sale has ended
  • site
    LOT 392
    Eight - Four Draw Metal Filing Cabinets
    Sale has ended
  • site
    LOT 393
    Three - Two Door Metal Cupboards
    Sale has ended
  • site
    LOT 394
    Kodak Carousel SAV2000 Slide Projector.3M Model 223 Projector.Sony Trinitron Monitor. DVD Player and Video Player/Recorder
    Sale has ended