GE Gas Power - BIRR Switzerland
Equipment Available As Surplus of Ongoing Business. Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item. NOTE: GE to Approve All Offers Prior to Apex Final Invoicing. Any Bidder MUST and CAN ONLY USE the GE-Approved Riggers to Work Onsite Please See Essential Information for More Details.
Ended: 30th November 2022 14:00
- LOT 1
![site]()
Stratasys Fortus 900MC 3D Printer With Touchworks GrabCADBuild Size 914.4 x 609.6 x 914.4mm. Layer Thickness 0.127-0.508mm. S/No. 125-00300. Note: Wire Feed Needs Attention.Sale has ended - LOT 2
![site]()
Polysoude Autotig 600PC Orbital Hotwire Tig Welding UnitPolysoude welding current source / power source 20A / 10V - 600 A / 34V. S/No. 0968249 (2006).Sale has ended - LOT 3
![site]()
Polysoude Autotig 600PC Orbital Hotwire Tig Welding UnitPolysoude welding current source / power source 20A / 10V - 600 A / 34V. S/No. 0968246 (2006).Sale has ended - LOT 4
![site]()
ITG Induction Heating System For Rotor Heating With Siemens Simatic PLCMake-Transistorized Converter Zone 7-12. Type ITPA 6 x 1K80. Nominal Power 6 x 80kW. Nominal Voltage 600/400v. Nominal Frequency 1khz. Compensation 3 x 452 kvar. Power Connection 2x 3x 480v/60Hz. Back Up Fuse 1,000A +25A. Control Voltage 24...Sale has ended - LOT 5
![site]()
ITG Induction Heating SystemMake-Transistorized Converter Zone 7-12. Type ITPA 6 x 1K80. Nominal Power 6 x 80kW. Nominal Voltage 600/400v. Nominal Frequency 1khz. Compensation 3 x 452 kvar. Power Connection 2x 3x 480v/60Hz. Back Up Fuse 1,000A +25A. Control Voltage 24...Sale has ended - LOT 6
![site]()
TPA Brianza Turn Table With Support/Riser BlockTurn table from welding station Load capacity: max. 350 ton Height: approx. 1,900mm Diameter: approx. 3,314mm Weight: 26’000 kg Low speed range 0.004 – 0.2rpm High speed range: 0.02 - 4 rpm S/No. 20810 (2009).Sale has ended - LOT 7
![site]()
Ingersol Production Systems Rotor/Shaft Assembly Unit With Drive, Planetary Gear, Brake & Support BlockDesigned for: Workpiece weight= 300 tons Journal diameter max. = 1000 mm Workpiece length = 14500 mm Workpiece diameter = 7000 mm This large rotor balding station had been manufactured and installed in the USA. North America has other volta...Sale has ended - LOT 8
![site]()
TPA Brianza NI14030AH Cable RecoilerThis cable winding machine had been used to unroll induction heating cables. This machine can also roll up the cables and can flip the cable drum from vertical to horizontal. S/No. 21201Sale has ended - LOT 9
![site]()
Codere Electric Furnace Model KM170/13Approx Internal Dimensions W560 x D860 x H460mm. Maximum Temperature 1,300°C. S/No. 12-01251 (2012).Sale has ended - LOT 10
![site]()
Borel Electric Furnace Type 180/350Approx Internal Dimensions W555 x D575 x H690mm. Maximum Temperature 350°C. S/No. OF1677.Sale has ended - LOT 11
![site]()
Codere Electric Furnace Model KM10/13Approx Internal Dimensions W260 x D300 x H120mm. Maximum Temperature 1,300°C. S/No. 13-01666 (2013).Sale has ended - LOT 12
![site]()
Knoll FHA/1500 3 Grundfos Pump Return Filtration SystemCooling lubricant return pump station. Includes 3 pieces Grundfos Pumps Type NB50-250 and 3 Pieces Danfoss Socla FiG408, JL1040. S/No. 200314182 92003).Sale has ended - LOT 13
![site]()
Codere Electric Furnace Model KM10/13Approx Internal Dimensions W260 x D300 x H120mm. Maximum Temperature 1,300°C. S/No. 16-02787 (2017).Sale has ended - LOT 14
![site]()
ITG Systec Electrical CabinetSale has ended - LOT 15
![site]()
2 Rittal Electrical Cabinets With Various Electrical ComponentsSiemens control Simatic S7-300 Siemens control module numbers: 972-0CB35-0XA0 315-2FH13-0AB0 321-1BL00-0AA0 321-1BL00-0AA0 322-1BL00-0AA0 323-1BH01-0AA0 321-1BH02-0AA0 338-4BC01-0AB0 338-4BC01-0AB0 Including several other electrical compone...Sale has ended - LOT 16
![site]()
Ade Scissor Lift TableApprox Dimensions L1,640 x W1,200 x H1,500mm. Max Lifting Weight 200kg.Sale has ended - LOT 17
![site]()
Ade Scissor Lift TableApprox Dimensions L1,640 x W1,200 x H1,500mm. Max Lifting Weight 200kg.Sale has ended - LOT 18
![site]()
Codere Electric Furnace Model KM10/13Approx Internal Dimensions W260 x D300 x H120mm. Maximum Temperature 1,300°C. S/No. 01396 (2013).Sale has ended - LOT 19
![site]()
German Sonic Clean Station Model UW 350VTank Dimension W950 x D650 x 770mm Deep. S/No. 24630 (2017).Sale has ended - LOT 20
![site]()
Broacher Type VKB-4/6 With 5 Drawer Cabinet Of ToolingØ200mm 3 Jaw Chuck. Approx Throat Dimension 150mm. Approx Cabinet Dimension W750 x D800 x H830mm.Sale has ended - LOT 21
![site]()
- LOT 22
![site]()
- LOT 23
![site]()
- LOT 24
![site]()
- LOT 25
![site]()
- LOT 26
![site]()
- LOT 27
![site]()
Presi Mecotone T350M Circular Cut Off SawWith 'T' Slotted Table 400 x 320mm. Distance From Wheel To Table 150mm. Wheel Ø355mm. With Coolant System.Sale has ended - LOT 28
![site]()
- LOT 29
![site]()
- LOT 30
![site]()
- LOT 31
![site]()
- LOT 32
![site]()
- LOT 33
![site]()
- LOT 34
![site]()
- LOT 35
![site]()
- LOT 36
![site]()
- LOT 37
![site]()
- LOT 38
![site]()
- LOT 39
![site]()
- LOT 40
![site]()
- LOT 41
![site]()
- LOT 42
![site]()
- LOT 43
![site]()
- LOT 44
![site]()
Ø400mm 4 Jaw ChuckSale has ended - LOT 45
![site]()
Ø400mm 4 Jaw ChuckSale has ended - LOT 46
![site]()
Reishauer Ø250mm 3 Jaw ChuckSale has ended - LOT 47
![site]()
- LOT 48
![site]()
- LOT 49
![site]()
- LOT 50
![site]()
- LOT 51
![site]()
- LOT 52
![site]()
3 Cast Iron Box Angle Plates With 2 Ground ParallelsApprox Plate Dimension W300 x D200 x H150mm. Parallel W100 x D100 x L300mm.Sale has ended - LOT 53
![site]()
- LOT 54
![site]()
- LOT 55
![site]()
Almatic NC8-125M Machine Vice On Base PlateJaw Width 125mm. Plate Dimension 300 x 300mm.Sale has ended - LOT 56
![site]()
Ø210mm Schunk Rota NC Plus 210-52 3 Jaw Power ChuckSale has ended - LOT 57
![site]()
- LOT 58
![site]()
- LOT 59
![site]()
- LOT 60
![site]()
- LOT 61
![site]()
- LOT 62
![site]()
- LOT 63
![site]()
- LOT 64
![site]()
- LOT 65
![site]()
- LOT 66
![site]()
- LOT 67
![site]()
- LOT 68
![site]()
- LOT 69
![site]()
- LOT 70
![site]()
- LOT 71
![site]()
- LOT 72
![site]()
- LOT 73
![site]()
- LOT 74
![site]()
- LOT 75
![site]()
- LOT 76
![site]()
- LOT 77
![site]()
Lista 6 Drawer Tooling Cabinet With Kelch Tool Clamping Unit & Gressel ViceApprox Dimension W710 x D570 x H910mm.Sale has ended - LOT 78
![site]()
- LOT 79
![site]()
- LOT 80
![site]()
- LOT 81
![site]()
Wooden Topped Workbench With 2 Lista 4 & 6 Drawer Tooling Cabinets & Gressel ViceApprox Dimension W2,500 x D800 x H800mm.Sale has ended - LOT 82
![site]()
Wooden Topped Workbench With Lista 6 Drawer Tooling Cabinet & Gressel ViceApprox Dimension W2,000 x D820 x H900mm.Sale has ended - LOT 83
![site]()
Wooden Topped Workbench With Lista 6 Drawer Tooling Cabinet & Heuer ViceApprox Dimension W1,750 x D815 x H900mm.Sale has ended - LOT 84
![site]()
- LOT 85
![site]()
- LOT 86
![site]()
- LOT 87
![site]()
- LOT 88
![site]()
- LOT 89
![site]()
- LOT 90
![site]()
- LOT 91
![site]()
Lista 4 Drawer Wooden Topped Workbench With TablesApprox Dimension W560 x D570 x H1,050mm.Sale has ended - LOT 92
![site]()
- LOT 93
![site]()
- LOT 94
![site]()
- LOT 95
![site]()
- LOT 96
![site]()
- LOT 97
![site]()
- LOT 98
![site]()
- LOT 99
![site]()
- LOT 100
![site]()
- LOT 101
![site]()
- LOT 102
![site]()
- LOT 103
![site]()
- LOT 104
![site]()
- LOT 105
![site]()
- LOT 106
![site]()
- LOT 107
![site]()
- LOT 108
![site]()
- LOT 109
![site]()
- LOT 110
![site]()
- LOT 111
![site]()
- LOT 112
![site]()
- LOT 113
![site]()
- LOT 114
![site]()
- LOT 115
![site]()
- LOT 116
![site]()
- LOT 117
![site]()
- LOT 118
![site]()
- LOT 119
![site]()
- LOT 120
![site]()
- LOT 121
![site]()
- LOT 122
![site]()
- LOT 123
![site]()
- LOT 124
![site]()
- LOT 125
![site]()
- LOT 126
![site]()
- LOT 127
![site]()
- LOT 128
![site]()
- LOT 129
![site]()
- LOT 130
![site]()
- LOT 131
![site]()
- LOT 132
![site]()
- LOT 133
![site]()
- LOT 134
![site]()
- LOT 135
![site]()
- LOT 136
![site]()
- LOT 137
![site]()
- LOT 138
![site]()
8 Unused Imperial Hand Taps G 3/4" & G 5/8"Sale has ended - LOT 139
![site]()
- LOT 140
![site]()
- LOT 141
![site]()
110 Kennametal RPEX0602M0F701 SP6519 Indexable InsertsSale has ended - LOT 146
![site]()
Quantity Of Assorted Tapping ColletsSale has ended - LOT 147
![site]()
Quantity Of Assorted Milling CuttersSale has ended - LOT 148
![site]()
Quantity Of Assorted Milling CuttersSale has ended - LOT 149
![site]()
Quantity Of Assorted Milling CuttersSale has ended - LOT 150
![site]()
Quantity Of Assorted ShacklesSale has ended - LOT 151
![site]()
Quantity Of Assorted ShacklesSale has ended - LOT 153
![site]()
Quantity Of Assorted Eye BoltsSale has ended - LOT 154
![site]()
Quantity Of Assorted Eye BoltsSale has ended - LOT 155
![site]()
Quantity Of Assorted Eye BoltsSale has ended - LOT 156
![site]()
- LOT 157
![site]()
Quantity Of Arch (Hollow) PunchesSale has ended - LOT 158
![site]()
Quantity Of Arch (Hollow) PunchesSale has ended - LOT 159
![site]()
Quantity Of Indexable Inserted Milling CuttersSale has ended - LOT 160
![site]()
5 Walter HSK 100 ToolholdersSale has ended - LOT 161
![site]()
6 Walter HSK 63 ToolholdersSale has ended - LOT 163
![site]()
200 Boxed Mitsubishi RPMT1040M0E4-M Indexable InsertsSale has ended - LOT 164
![site]()
- LOT 165
![site]()
Approx 200 Boxed Mitsubishi Indexable InsertsSale has ended - LOT 166
![site]()
- LOT 167
![site]()
- LOT 168
![site]()
- LOT 169
![site]()
- LOT 170
![site]()
Quantity Of Taper Shank SleevesSale has ended - LOT 171
![site]()
4 Back Chamfering/Counterbore Milling ToolsSale has ended - LOT 172
![site]()
Quantity Of Grooving/Slitting Milling CuttersSale has ended - LOT 173
![site]()
Quantity Of Assorted Milling CuttersSale has ended - LOT 174
![site]()
Quantity Of Taper Shank HSS DrillsSale has ended - LOT 175
![site]()
Quantity Of Taper Shank HSS DrillsSale has ended - LOT 176
![site]()
Quantity Of Taper Shank HSS DrillsSale has ended - LOT 177
![site]()
Quantity Of Straight Shank Carbide DrillsSale has ended - LOT 178
![site]()
Quantity Of Assorted Milling CuttersSale has ended - LOT 179
![site]()
Quantity Of Assorted Milling CuttersSale has ended - LOT 180
![site]()
Quantity Of Assorted Milling CuttersSale has ended - LOT 181
![site]()
Quantity Of Assorted Milling CuttersSale has ended - LOT 182
![site]()
Quantity Of Assorted Milling CuttersSale has ended - LOT 183
![site]()
Quantity Of Shell Milling CuttersSale has ended - LOT 184
![site]()
Quantity Of Shell Milling CuttersSale has ended - LOT 185
![site]()
Quantity Of Shell Milling CuttersSale has ended - LOT 186
![site]()
Quantity Of Straight Shank HSS DrillsSale has ended - LOT 187
![site]()
Quantity Of Assorted TapsSale has ended - LOT 188
![site]()
Quantity Of Taper Shank HSS DrillsSale has ended - LOT 189
![site]()
Quantity Of Taper Shank HSS DrillsSale has ended - LOT 190
![site]()
5 Unused Walter M30 Long Series Machine TapsSale has ended - LOT 191
![site]()
5 Unused Walter M30 Long Series Machine TapsSale has ended - LOT 192
![site]()
Quantity Of Tapping ColletsSale has ended - LOT 193
![site]()
Quantity Of Tapping ColletsSale has ended - LOT 194
![site]()
Quantity Of Taper Shank SleevesSale has ended - LOT 195
![site]()
Quantity Of Taper Shank SleevesSale has ended - LOT 196
![site]()
Quantity Of Taper Shank SleevesSale has ended - LOT 197
![site]()
Quantity Of Taper Shank SleevesSale has ended - LOT 198
![site]()
- LOT 199
![site]()
Quantity Of Kaiser P55 Modular ToolholdersSale has ended - LOT 200
![site]()
- LOT 201
![site]()
- LOT 202
![site]()
8 Walter HSK 100 & HSK 125 Toolholders With ToolingSale has ended - LOT 203
![site]()
2 Bilz Tapping Collet Holders MS 32 & MS 40Sale has ended - LOT 204
![site]()
SCA 3 Jaw Manual ChuckSale has ended - LOT 205
![site]()
Quantity Of Bilz Collet TapholdersSale has ended - LOT 206
![site]()
9 Walter HSK 100-A ToolholdersSale has ended - LOT 207
![site]()
9 Walter HSK 100-A ToolholdersSale has ended - LOT 208
![site]()
8 Walter HSK 100-A ToolholdersSale has ended - LOT 209
![site]()
7 Walter HSK 125 ToolholdersSale has ended - LOT 210
![site]()
- LOT 211
![site]()
- LOT 212
![site]()
- LOT 213
![site]()
S.P.A SA-3C Taper Shank Tapping Collet HolderSale has ended - LOT 214
![site]()
S.P.A SA-3C Taper Shank Tapping Collet HolderSale has ended - LOT 215
![site]()
Large Quantity Of Walter HSK 100 ToolholdersSale has ended - LOT 216
![site]()
Large Quantity Of Walter HSK ToolholdersSale has ended - LOT 217
![site]()
- LOT 218
![site]()
Quantity Of Walter HSK 63-B ToolholdersSale has ended - LOT 219
![site]()
Quantity Of Assorted Ground ParallelsSale has ended - LOT 220
![site]()
Quantity Of Assorted Ground ParallelsSale has ended - LOT 221
![site]()
3 HSK Toolholders With ToolingSale has ended - LOT 222
![site]()
3 HSK Toolholders With Kaiser Boring HeadsSale has ended - LOT 223
![site]()
Quantity Of Kaiser Modular ToolholdersSale has ended - LOT 224
![site]()
Quantity Of Kaiser Modular ToolholdersSale has ended - LOT 225
![site]()
Quantity Of HSK Kaiser Modular ToolingSale has ended - LOT 226
![site]()
Quantity Of HSK Kaiser Modular ToolingSale has ended - LOT 227
![site]()
Quantity Of Toolholders, Back Boring Milling Cutters & DrillsHSK 100, ISO 50, Taper Shank.Sale has ended - LOT 228
![site]()
- LOT 229
![site]()
- LOT 230
![site]()
Quantity Of Ground ParallelsSale has ended - LOT 231
![site]()
Quantity Of Assorted ReamersSale has ended - LOT 232
![site]()
Waterloo Mobile 4 Drawer Tool CabinetSale has ended - LOT 233
![site]()
Quantity Of ISO 50 ToolholdersSale has ended - LOT 234
![site]()
2 Unused Wika 6 bar Pressure GaugesSale has ended - LOT 235
![site]()
2 Unused Wika 60 bar Pressure GaugesSale has ended - LOT 236
![site]()
3 Unused Wika 6 bar Pressure GaugesSale has ended - LOT 237
![site]()
2 Unused Wika 6 bar Pressure GaugesSale has ended - LOT 238
![site]()
2 Unused Wika 60 & 160 bar Pressure GaugesSale has ended - LOT 239
![site]()
2 Unused Wika 4 & 25 bar Pressure GaugesSale has ended - LOT 240
![site]()
3 Unused Wika 4 bar Pressure GaugesSale has ended - LOT 241
![site]()
Manual Roller UnitSale has ended - LOT 242
![site]()
- LOT 243
![site]()
Quantity Of Assorted Capto C6 Toolholders With ToolingSale has ended - LOT 244
![site]()
- LOT 245
![site]()
- LOT 246
![site]()
2 Ground Vee Blocks With Stepped Clamping WedgesSale has ended - LOT 247
![site]()
- LOT 248
![site]()
Quantity Of Straight Shank Ø32/20mm ToolholdersSale has ended - LOT 249
![site]()
Quantity Of Straight Shank Ø32mm ToolholdersSale has ended - LOT 250
![site]()
2 Unused Brutsch Ruegger 50mm Tool Setting BlocksSale has ended - LOT 251
![site]()
Quantity Of ISO 50 ToolholdersSale has ended - LOT 252
![site]()
- LOT 253
![site]()
3 Steel Angle PlatesApprox Dimensions W275 x D150 x H150mm, W200 x 150 x H150mm & W400 x D225 x H300mm.Sale has ended - LOT 254
![site]()
- LOT 255
![site]()
Trutmann Hydraulic Pump With Hose & TankSale has ended - LOT 256
![site]()
2 Pibomulti ISO 50 X1055 Driven ToolholdersSale has ended - LOT 257
![site]()
Renauld CH-2022 Grinding Spindle in Wooden BoxMaximum Spindle Speed 28,000rpm. Ø80mm x 260mm Long.Sale has ended - LOT 258
![site]()
Quantity Of Indexable Inserted Turning ToolsSale has ended - LOT 259
![site]()
Quantity Of Indexable Inserted Turning ToolsSale has ended - LOT 260
![site]()
Quantity Of Indexable Inserted Turning ToolsSale has ended - LOT 261
![site]()
- LOT 262
![site]()
- LOT 263
![site]()
- LOT 264
![site]()
LOT 265![site]()
5 Lista Personnel LockersSale has ended- LOT 266
![site]()
Quantity Of Tool Steel Turning ToolsSale has ended - LOT 267
![site]()
Quantity Of Tool Steel Turning ToolsSale has ended - LOT 268
![site]()
Quantity Of Tool Steel Turning ToolsSale has ended - LOT 269
![site]()
