Gill Engineering

CNC Turning, Vertical Machining Centres and Equipment Available due to Restructuring

Ended: 28th May 2015 14:00
  • site
    LOT 1
    Daewoo (Delivered New April 2005) Model Puma MX2000ST CNC 9 Axis Milling / Turning Centre. With Hydrafeed MX-1B CNC Bar Feed. Fitted with Fanuc Series 18i-TB Control.
    Max Swing over Bed 750mm. Max Turning Diameter 550mm. Max Turning Length 1020mm. Universal Milling Spindle Nose Capto C6 with 40 Position ATC. Lower Turret with 12 Stations. S/No PX20ST0039
    Sale has ended
  • site
    LOT 2
    Kitamura Mycentre - 2X Vertical Machining Centre with Nikken CNC 201 Table - 4th Axis and Fanuc 16i-M Control
    Main Table 786mm x 355mm. Sub Table 1016mm x 355. Traverses X = 510mm. Y = 355mm. Z = 460mm. ATC Capacity 20 Tools. Spindle Nose 40BT. Spindle Speeds to 10,000 RPM. S/No 07153
    Sale has ended
  • site
    LOT 3
    Mazak Model SQT10MS - Super Quickturn CNC Turning Centre with Secondary Spindle - Hydrafeed ML1 CNC Bar Feed - Driven Tools and Mazatrol T Plus Control
    Max Swing over Bed 435mm. Max Machining Diameter 230mm. Traverses X = 160mm Z = 455mm. B = 460mm. Turret with 12 Stations. S/No 113641 - 1995
    Sale has ended
  • site
    LOT 4
    Hyundai Model SPT-V30T CNC Drill Tap Machine. Fitted with Yasnak MX3 Control
    Table 600mm x 380mm. Traverses X = 500mm. Y = 300mm. Z = 300mm. ATC Capacity 14 Tools. Spindle Nose 30BT. Spindle Speeds to 8,000 RPM. S/No 07153
    Sale has ended
  • site
    LOT 5
    Aberlink (2008) Axiom too 600 Manual Coordinate Measuring Machine - CMM
    Granite Table Working Area Approx 900mm x 830mm. Measuring Volume 640mm x 600mm x 500mm. With Renishaw MH20i Probe. Aberlink Camera Unit. PC with Monitor. S/No 4432
    Sale has ended
  • site
    LOT 6
    Addison Model CB-250A Automatic Horizontal Band Sawing Machine - ChungJei Model CB-250A
    Capacity 250mm. S/No CJ-76712
    Sale has ended
  • site
    LOT 7
    Jones & Shipman Type S8413-002 770 CNC Rotary Table with Sanders Control
    Face Plate Diameter 250mm. Centre Height 160mm
    Sale has ended
  • site
    LOT 8
    Lapmaster Model 15 Horizontal 3 Ring Lapping Machine
    Single Phase - 240 Volt. Plate Diameter 381mm (15"). S/No AAA00960
    Sale has ended
  • site
    LOT 9
    Delapena Auto Speedhone - Honing Machine
    With Quantity of Honing Tools. S/No 2307/10.
    Sale has ended
  • site
    LOT 10
    Clarkson Mk 1 Tool & Cutter Grinding Machine
    Capacity 304.8mm x 152mm (12" x 6"). With Centres. S/No 4900
    Sale has ended
  • site
    LOT 11
    Pollard Corona Model 15LX Six Spindle Inline Drilling Machie
    Table Area Approx 1727mm x 508mm. All Spindles No 3 Morse Taper. Spindle Centres Approx 279mm (11"). One Spindle with Power Feed - Speeds 84 to 1465 RPM. All Hand Feed Spindles Speeds 84 to 2940 RPM. S/No 21053A
    Sale has ended
  • site
    LOT 12
    Meddings Model MB4 Bench Drilling Machine
    Throat Approx 190mm. Table 273mm x 254mm. With 13mm Drill Chuck. Spindle Speeds 80 to 4000 RPM. S/No 020728
    Sale has ended
  • site
    LOT 13
    CompAir Broom Wade Model 6000E Packaged Air Compressor
    Machine Type 6010E07AS. Capacity 7 bar. S/No F126/1236
    Sale has ended
  • site
    LOT 14
    Brierley Model ZB32 Drill Point Grinding Machine
    Capacity 2.5 to 32mm Diameter. With 6 Jaw Chuck & Tooling Cabinet. S/No 10A301823
    Sale has ended
  • Image not available
    Image not available
    site
    LOT 15
    Spare Lot
    Sale has ended
  • site
    LOT 16
    Ixion Type BT 15GL Bench Top Pitch Controlled Tapping Machine
    Table Area Approx 315mm x 220mm. Throat Approx 200mm. S/No 99335
    Sale has ended
  • site
    LOT 17
    LNS Super Hydrobar HS CNC Bar Feed
    Overall Length Approx 5M. Bar Capacity 52mm
    Sale has ended