Hamworthy Engineering (Poole)

Siemens Sinumerik Control, Table Size 1200mm x 450mm, X = 1010mm Y = 500mm Z = 500mm, Spindle Speed 8000 rpm, 24 ATC, Spindle Taper BT 40

Pallet Size 800mm x 800mm, Spindle Taper BT 50, 2 x 100 Tool ATC, Indexable Head, X Y Z U B Axis, Renishaw Probe

Control Okuma 5000 L-G, Swing Over Cross Slide 380mm, Swing Over bed Covers 520mm, Between Centres 1000mm, Equipped with Tailstock, Upper Turret with 12 Stations and Lower Turret with 10 Stations

Control OSP5020L, Swing Over Cross Slide 340mm, Swing Over Bed Covers 520mm, Between Centres 1000mm, Equipped with 12 Station Turret, Parts Catcher and Tailstock

Swing Over Bed 22", Swing Over Cross Slide 12", Hollow Spindle 2.1/4", Between Centres 80", 3/4 Jaw Chucks, Fixed Steady

Control Siemens Sinumerik, Swing Over Cross Slide 540mm, Swing Over Bed Covers 740mm, Between Centres 1500mm

Table Size 1250mm x 1250mm, Facing Slide 600mm Diameter, Spindle 100mm Diameter, Spindle Taper 50 INT, X Axis Travel 1400mm, Z Axis Travel 1150mm, Heidenhain 3 Axis D.R.O

Swing 520mm, Between Centres 2000mm, Work Head Speeds 31.5-500 rpm, Fitted with Wheel Dresser

Electro-Magnetic Chuck Size 1500mm x 500mm, Segmental Wheel Size 600mm Diameter, Height Under Wheel 500mm, Equipped with Coolant/Clarifer

Swing Over Bed 22", Between Chucks 50", Speeds 20-63 rpm, Equipped with Wheel Dresser, Balancing Stand, 1 x 2 Point & 1 x 3 Point Steady

Capacity 1.3"-8.8" Diameter, Maximum Stroke 27.5", Table Size 55" x 36", Speeds 28-475 rpm, Equipped with Quantity of Honing Heads

Table Size 48", Swing 54", Height Under Cross Slide 38", Table Speed 5.6-125 rpm, Heidenhain 2 Axis D.R.O.

Table Size 36", Swing 42", Height Under Cross Slide 23", Table Speed 10.6-236 rpm, Heidenhain 2 Axis D.R.O.

Maximum Key Width 50mm, Stroke Length 450mm, Equipped with Tooling

Stroke 300mm, Table Size 315mm x 800mm, Throat Depth 400mm, Equipped with 400mm Rotary Table

Table Size 1400mm x 350mm, Spindle Bored 40 INT, Speeds 40-3000 rpm Vertical & 25-1500 Horizontal, Anilam 3 Axis D.R.O., 2 x Arbor Supports & Arbor

Swing Over Bed 32", Swing Over Cross Slide 21", 5" Hollow Spindle, Spindle Speeds 16-470 rpm, Equipped with Heidenahin D.R.O., 3 & 4 Jaw Chucks and Turret Tooling

Swing Over Bed 23", Swing Over Cross Slide 15", 5" Hollow Spindle, Heidenhain D.R.O., Equipped with 3 & 4 Jaw Chucks and Turret Tooling

Schenck CAB720 Control, Swing Over Bed 1050mm, Component Length 1600mm, Swing Inside Safety Covers 700mm, Speeds 230-1250 rpm

Swing Over Bed 22", Swing in Gap 35", Between Centres 24", Spindle Speed 20-1000 rpm, 3.5" Hollow Spindle

With Kemppi FU30 Wire Feed And Cooler

With Kemppi FU30 Wire Feed And Cooler

240 Volt Supply

Approx Internal Dimensions: 460mm x 460mm x 480mm High

110 Volt Supply

With 2 x Support arms.Squaring arm.Power Back Guage.Rapid Blade adjustment

With Swivel Vice.Max Capacity 360mm.

With Heidenhain Toolcheck 2 axis D.R.O. 3 Station Rotary Tool Holder

With Contents: Drills.Collets. Milling Cutters.Approx. Dimensions 715mm x 715mm x1150mm High

With Contents: Drills.Reamers .Approx. Dimensions 1090mm x 750mm x1055mm High

With Contents: Taps.Milling Cutters. Collets .Approx. Dimensions 1090mm x 750mm x1055mm High

With Contents: Drills .Approx. Dimensions 1090mm x 750mm x1055mm High

With Minimal Contents. Approx. Dimensions 760mm x 705mm x 1120mm High

With Minimal Contents. Approx. Dimensions 760mm x 705mm x 1120mm High

With Minimal Contents. Approx. Dimensions 760mm x 705mm x 930mm High

With Contents: Drills. Approx. Dimensions 560mm x 670mm x 850mm High

40 mm VDI Shank

40 mm VDI Shank

40 mm VDI Shank

40 mm VDI Shank

40 mm VDI Shank

40 mm VDI Shank

40 Int. Drive

One Swivelling

Work Area 500mm x 350mm Approx

Approx 310mm x 260mm x 230mm

Approx 310mm x 260mm x 230mm

Approx 310mm x 260mm x 230mm

Approx 460mm x 305mm x 230mm

Approx 460mm x 305mm x 230mm each

Approx 310mm x 260mm x 230mm each

Work Area 380mm x 285mm Approx

Work Area 305mm x 230mm Approx

Work Area 305mm x 230mm Approx

Jaw Width 105mm.

With 71/2" 3 Jaw chuck. Centre Height 6"

Table Dia. 355mm.

Jaw Width 330mm.

Jaw Width 155mm.

Jaw Width 160mm.

With Mobile Trolley. Centre Height 300mm. Distance Between Centres 1400mm.

Table Dia. 390mm.

Chuck Dia. 200mm. Centre Height 130mm.

Jaw Width 110mm

Approx 300mm x 200mm x 230mm

Jaw Width 155mm.

Inspection Recommended

Inspection Recommended

Inspection Recommended

With Contents:- Carbide Insert Turning and Boring Tools.Collets. 40mm VDI Tooling

Centre Height 205mm. Distance Between Centres 500mm.

Table Dia. 460mm.

Max Temp. 240 deg C. 4.5Kw. Approx Int. Dimensions: 680mm x 350mm x 350mm Deep

Approx Dimensions 760mm x 700mm x 1530mm High

Approx Dimensions 760mm x 700mm x 850mm High

With 125mm 3 Jaw Chuck and Spindle Braking Unit

Throat Distance 130mm

Approx 38

Approx Dimensions 760mm x 700mm x 1120mm High

250mm Jaw Width