L D Precision Engineering

Manufactured 2005, Turning Length 20" / 508mm, Turning Diameter 10.25" / 260mm, Spindle Speeds up to 4000 rpm, Bar Capacity 2" / 51mm, 3 Jaw Chuck 210mm Diameter, Swarf Screw & Tool Presetter

Manufactured 1997, HAAS Control, Table Size 40" x 18" / 1016mm x 457mm, Table Load 3500 lbs / 1588 kgs, Longitudinal Traverse X Axis 40" / 1016mm, Cross Traverse Y Axis 20" / 508mm, Vertical Traverse Z Axis 25" / 63...

S.No. 7915, Tables Size 1635mm x 700mm, Table Left/Right 1250mm, Table Rise & Fall 420mm, Speeds 20-2066 rpm, Spindle Taper in Vertical Head 40 INT, Newall 3 Axis DRO

Spindle Traverse 800mm, Head Stock Vertical Traverse 1500mm, Column Horizontal Traverse 4200mm, Spindle Speeds 7-1000 rpm, Spindle Bore 50 INT, 1 x 4000mm x 1500mm Floor Plates, 1 x Off Set Milling Head with 50 INT Taper

Height of Centres 500mm, Between Centres 17000mm, Swing Over Bed 1000mm, Swing Over Cross Slide 660mm, Spindle Speeds 22.4-710 rpm,

Grinding Diameter Internal Range 1" - 40" / 25mm - 1016mm, Swing Over Bed 46" / 1168mm, Table Traverse 28" / 711mm, Work Head Swivels 45-0-45 Degrees, Fitted with 36" / 914mm Diameter Faceplate & Wheel Dresser

S.No. 750063, Manufactured 1977, Capacity - Rounds 800mm Dia, Squares 1000mm x 1000mm up to 380mm Long, Speeds 17-65 Metres per Minute, Hydraulic Front Table 400mm Traverse

Height of Centres 15" / 381mm, Between Centres 216" / 5486mm, Spindle Speeds 7.4-600 rpm, Spindle Bore 4.5/8" / 118mm, Fixed/Travelling Steadies

Swing 42" / 1067mm, Speeds 5.6-125 rpm, Newall 2 Axis DRO, 4 x Table Jaws & 3 x Turret Tools

S.No. 26076, Capacity 450mm, Tables Size 15.75" x 13" / 400mm x 330mm, Table Left/Right 19" / 483mm, Table Rise & Fall 10" / 254mm, Ram Strokes 15-150

Height of Centres 8.5" / 216mm, Between Centres 40" / 1016mm, Spindle Speeds 8-1400 rpm, Spindle Bore 3" / 76mm, Acurite 2 Axis DRO, Hydraulic Copying Attachment

Swing 6" / 152mm, Between Centres 12" / 305mm, Work Head Speeds 75-750 rpm, Work Head Swivels 0-90 Degrees, 1 x 2 Point Steady, 1 x Wheel Dresser & Coolant

Table Size 1600mm x 360mm, Table Left/Right 1200mm, Table In/Out 320mm, Table Rise & Fall 400mm, Speeds 19-960 rpm, 1 x Arbor and 2 x Arbor Supports

Spindle Speeds 60-1750 rpm, Spindle Bored No. 4 Morse Taper, Feed Rate 0.003"-0.036" / 0.076mm - 0.914mm

Spinde Speeds 86-1920 rpm, Spindle Bored No. 3 Morse Taper, Feed Rate 0.003" - 0.013" / 0.0762mm - 0.3302mm, Spindle Brake

Between Centres 36" / 914mm, Spindle Speeds 5.3-420 rpm, Spindle Bore 3.5" / 89mm, 4 Jaw Chuck 22" / 559mm

Table Size 43" x 24" / 1092mm x 610mm, Longitudinal Traverse 24" / 610mm, Cross Traverse 18" / 457mm, Vertical Traverse Head 12" / 305mm, Speeds 40-2500 rpm, Accurite 3 Axis DRO