Lixil Africa Closing Down Sale Auction 1 Krugersdorp

Engine run time 324h 18m 412 Starts, 500KVA

MAHO CNC 5 AXIS, DECKEL MAHO CNC Milling Machine,Problem with the spindle positioning(orientation) machine does not do tool change, working,all spares available from Retecon.

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot Sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

1 per Lot, sample photograph used

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

No drives, Wear on v belts and bearings common faults, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

No drives or control buttons, Wear on v belts and bearings common faults, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

No drive on Right hand side, Some repairs needed, requiers new drives, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

no drive of left hand side, Some repairs needed, requires new drives, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

no drive of left hand side, Some repairs needed, requires new drives, not working, Machine normally breakdown on motor bearing , v belts , Contactors and push buttons .

Not working

Working

Working

Working

Working

Compressor to be replaced, not working

Working

Working

Working, Proxys, Valve, Elements, Probes,cylinders 

working, Proxys, Valve, Elements, Probes,cylinders

working, Proxys, Valve, Elements, Probes,cylinders

v belts replaced due to wear, mixing blade Wear due to errotion from the sand, working. Regular cleaning prevents build up and prolongs blade life.

working, needs new rubbers and glass

Machine breakdown usually is Proxy, Hydraulic cylinder , valves , heating box elements and probes, working 

Machine breakdown usually is Proxy, Hydraulic cylinder , valves , heating box elements and probes, working

Thyristor or fuses blow, not working, channel is open circuit on furnace, panel still in working order

Thyristor or fuses blow, not working, channel is open circuit on furnace, panel still in working order

Thyristor or fuses blow - working

Thyristor or fuses blow - not working, channel is open circuit on furnace, panel still in working order

Thyristor or fuses blow, not working, channel is open circuit on furnace, panel still in working order

Thyristor or fuses blow, working 

Thyristor or fuses blow, working 

7X with Hood , 1X without Hood: Tables was used next to furnace for hand casting moulds. Table: W780mm x L610mm x H955  Hood: W500mm x L775mm xH825mm

12X pots: pots get fiiled with a corbon powder and water mix, fitter with a motor for stirring the mix. Mix is used to give the moulds a carbon coat to prevent the melted metal from sticking to the mould. Pot outside diamentions: 730 mm ...

Machine breakdown usually is Proxy, Hydraulic cylinder , valves , heating box elements and probes.

Machine breakdown usually is Proxy, Hydraulic cylinder , valves , heating box elements and probes not working,The one arm is broken off,

Working

Working

Working

Working

Working

Wear on v belts and bearings common faults, working , Machine normally breakdown on motor bearings & plumber block bearings

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearings & plumber block bearings

Wear on v belts and bearings common faults, working, Machine normally breakdown on motor bearings & plumber block bearings 

Working

Working

Working

Working

Working

Working

Fully functional, digital readout working, water pump working, coolant tank included, motorised tool holder included

Working

Working

Working

Working

Working

Working

Working

Working

Working

Working

Working

Working, Carpanelli TR5 16

Working

Working

Working

Working

Working

Working

Working

Working

Working

Working

Working

Fully functional, collet chuck and collets included, no digital readout, Feeds on both Axes working, steady included, working .

Fully functional. CNC controlled, clamping accessories included, radiator included, 2 x bags De-ionsed sand for De-ionising water, 5 x rolls 0.25mm K160 8KG wire included, working , 

Working

Working

1983, The machine is still in working condition, need some attention on the electrical panel, vacuum pump will need to be serviced due to machine not being used for almost a year

Not working, serial nr 2993, Model nr SM 540

Not working

Not working

Good working condition, not sure how the labling function is set up but it is working

Burners needs a service

Burners needs a service, working

Burners needs a service, working

Burners needs a service, working

Burners needs a service, working

Burners needs a service, working

Burners needs a service, working

Burners needs a service, working

Burners needs a service, working 

Control boxes needs some attention to fix up 100% but all units are still working

All units still working

Gear damaged on table rotation needs replacement, Control boxes needs some attention to fix up 100% but all units are still working.

only 2 of the units are working

Cabling needs some attention, all units working

Machine was not in use for a long time. Needs a service on all moving parts and seals but still working. Extractor needs filter replacement (not working)

Needs new seals and service on the foot actuator, not working.

X16 off,  Dimensions L XBXH, 990X385X895mm

X15 off, Dimensions L XB XH, 600X900X300mm

X15 off, Dimensions L XB XH,600X900X300mm

X13 off, Dimensions L XB XH,600x900x300mm

X15 off, Dimensions L XB XH, 600X445X320mm       

X15 off, Dimensions L XBXH, 600X445X320mm

X15 off, Dimension L XBXH, 600X445X320mm

X10 off, Dimensions L XB XH, 500X400X1660mm

X10 off, Dimensions L XB XH, 500X400X1660mm

X6 off, Dimensins L XB XH, 1st off 1050X560X1830mm 2nd off 750X495X1810mm  3rd off 750X495X1800mm  4th off 505X450X1650mm  

X10 off, Dimensions L XB XH, 465X290X720mm

X8 off, Dimensions L XB XH, 430X350X870mm   

X80 off, Dimensions L XBXH, 580X380X180mm

X80 off, Dimensions L XBXH, 580X380X180mm