Machine Tools and Forging Equipment

Available Due to Closure of Kellingley and Thorseby Colliery Maintenance Workshops. Removed to Storage due to Demolition of Sites.

Ended: 29th November 2016 15:00
  • site
    LOT 1
    MASSEY 10CWT Clear Space Forging Hammer with Anvil
    Capacity 10CWT / 0.5ton. 110 Beats per min. 60hp motor
    Sale has ended
  • site
    LOT 2
    Kitchen and Walker E3 6ft Radial Arm Drill
    Radial Arm length 6ft , 5morse taper Spindle, Drilling capacity 76mm, Speed range 18 - 1000 rpm, Serial No. 3038 (1979)
    Sale has ended
  • site
    LOT 3
    Kitchen and Walker E3 6ft Radial Arm Drill
    Radial Arm lenght 6ft , 5morse taper Spindle, Drilling capacity 76mm, Speed range 18 - 1000 rpm, Serial No. 3040 (1979)
    Sale has ended
  • site
    LOT 4
    Colchester Mastiff 1400 Gap Bed Centre Lathe
    Swing over bed 535 mm, Swing in gap 815 mm, distance between centres 3000 mm
    Sale has ended
  • site
    LOT 5
    Ajax AJ 400 Gap Bed Centre Lathe
    Swing over bed 800 mm, Swing in gap 1050 mm, distance between centres 3000 mm, speeds 8 -2000rpm
    Sale has ended
  • site
    LOT 6
    Bomar STG 260 Horizontal Bandsaw
    Capacity 260 mm round, Section-90 deg 410 x 260 mm. With Mitring.
    Sale has ended
  • site
    LOT 7
    Urpe M300 G Slotter
    Capacity 300 mm Stroke, Swivel head,
    Sale has ended
  • site
    LOT 8
    Kitchen and Walker E3 4ft Radial Arm Drill
    Radial Arm Length 4ft 5morse taper Spindle, Drilling capacity 76mm, Speed range 18 - 1500 rpm. (1978)
    Sale has ended
  • site
    LOT 9
    Elliot Major 24" Shaper
    Capacity 24"
    Sale has ended
  • site
    LOT 10
    ETSCO 4A Shaper
    Capacity 24"
    Sale has ended
  • site
    LOT 11
    Meba 320G Horizontal Bandsaw
    Capacity 320 mm. With Mitring. 
    Sale has ended
  • site
    LOT 12
    Kingsland J21 Iron Worker
    66 Tons Capacity Punch - 30 mm x 16mm Capacity Angle - 125 x 125 x 13mm Shear - 250 x 13mm
    Sale has ended
  • site
    LOT 13
    Adcock and Shipley 2S Universal Mill
    Table size: 1370 x 305 mm, Spindle size: 50int, Spindle speeds: 30 - 1500rpm
    Sale has ended
  • site
    LOT 14
    Churchill Denham Heavy Duty Lathe
    Swing over bed 24", 8ft between centres spindle speeds 15 - 1000rpm
    Sale has ended
  • site
    LOT 15
    Dean Smith and Grace 18-10 X 60 Centre Lathe
    swing over bed 18" distance between centres 60", spindle speeds 8 - 1160rpm,
    Sale has ended
  • site
    LOT 16
    Dean Smith and Grace 1709 Centre Lathe
    Swing over bed 17" distance between centres 60" Spindle Speeds 11.2 - 1250rpm
    Sale has ended
  • site
    LOT 17
    Duplex D30 Tool Post Grinder
    D30 Wheel size 6" x 1 1/4"
    Sale has ended