Marine Shipyard Equipment & Maintenance Facility

Top platen: With 1100mm Internal Rotary Table, 1100mm x 1100mm. Bottom table: With 1200mm Internal Rotary Table, 1600mm x 1200mm. Cross traverse: Top Platen 3000mm, Bottom Table without Sub Table 3000mm. Tables rotate: Top & Bottom Rota...

Maximum pressure: 400 ton. Capacity: 60" / 1524mm Wide x 2" / 51mm Thick. Maximum plate width: 72" / 1829mm. Beam Stroke 9" / 229mm. Loading equipment required.

Unused. Capacity: With Appropriate Rolls. Angles (Leg-Out): 200mm x 200mm x 20mm. Angles (Leg-In): 200mm x 200mm x 18mm. "T" Section (Leg-Out): 200mm x 200mm x 20mm. "T" Section (Leg-In): 200mm x 200mm x 20mm. Square: 12...

Capacity squares 75mm, flat on edge 120mm x 30mm, flat on flat 260mm x 15mm.

Capacity: 10' x 1.1/4" / 3048mm x 31.4mm Rolling or 10' x 7/8" / 3048mm x 22mm Pre Bending. Length of rolls: Top 123" / 3124mm, Bottom 122.1/4" / 3105mm. Roll diameter: 17" / 432mm. Roll rise & fall: Bottom Roll...

Fanuc 160i-L Control. Year of Manufacture: 2002. Control system: Fanuc 160i-L. Laser capacity: 4kW. Maximum cutting width: 10'6" / 3200mm. Maximum cutting length: 100' / 30,480mm. Laser System: Fanuc C4000 E. Machine dismantled for tra...

FAGOR Control, Retro Fitted 2009. Year of Manufacture: 1989. Control: FAGOR, Retro Fitted 2009. Cutting length: 11,000mm. Cutting width: 4750mm. Thickness of cut: Up to 8" / 203mm. Machine dismantled for transportation.

Guards: Optoscan Infra-Red. Capacity: 500 Ton / 508,000 kgs x 16'3" / 4.95m. Maximum length of bend: 16'3" / 4.95m. Between frames: 12'2" / 3.71m. Daylight: 23" / 584mm. Throat depth: 13.1/2" / 343mm. Stroke length:...

Capacity: 16' x 5/8" / 4877mm x 16mm. Back gauge: Power. Rapid blade adjustment: Yes. Shadow-line: Yes. Work supports: 4 @ 59" / 1499mm Long. Squaring arms: 1 @ 59" / 1499mm Long. Input: 380/420/3/50 ac. Clamps: 21 x Hydrauli...

Table size: 84" x 41.1/2" / 2134mm x 1054mm Extension Table 96" x 64" / 2438mm x 1626mm. Ram platen: 32" x 12" / 813mm x 305mm. Pin diameter: 16" / 406mm with 10.1/4" x 8.1/4 Flat Area / 260mm x 210mm...

Capacity: 50 ton / 50,800 kgs. Work piece diameter: Minimum 450mm, Maximum 5200mm.

Capacity: 50 ton / 50,800 kgs. Work piece diameter: Minimum 450mm, Maximum 5200mm.

Capacity: 5 ton / 5080 kgs. Faceplate size: Head & Tailstock 60" / 1524mm, Centre Height 55" / 1397mm. Faceplate rotates: 360 Degrees. Faceplate speed: Variable.

Maximum length of weld: 33'6" / 10,211mm. Welding head travel: 35' / 10,668mm. Working head speed: Variable. Equipment: 1 x Lincoln Idealarc DC 1000 Power Source, Duty Cycle 1000 amps @ 100%, 1 x Lincoln Idealarc AC-1200 Power Source, ...

Capacity: 4000mm x 3000mm. Boom vertical movement: 3000mm. Boom horizontal movement: 4000mm. Amperage: Normal 650 amps, Maximum 815 amps. Welding heads: 1 OFF. Input: 380/420/3 50 ac. Duty cycle: 650 amps @ 100% or 815 amps @ 60%.

Year of Manufacture: 2001. CNC control: Control Techniques Model Digitax. Pipe Load: 12 ton / 12,192 kgs. Pipe Diameter: 1525mm Maximum, 75mm Minimum. Wall Thickness: 50mm Maximum Via Oxy-Acetylene Cutting, 3mm Minimum. Spindle Bore: 920mm....

Table Size: 72" / 1829mm. Swing: 78" / 1981mm. Height under cross slide: 24" / 610mm. Turret rise & fall: 26" / 660mm. Turret traverse: 38" / 965mm. Speeds: 5.2-117 rpm. Feed rate: 0.008" - 0.375" / 2....

No. 6 Morse Taper. Arm length: 10' / 3048mm. Base area: 113.1/4" x 60" / 2876mm x 1524mm. Arm rise & fall: 65" / 1651mm. Head traverse: 90" / 2286mm. Input: 415/3/50 AC 12.5 hp. Spindle speeds: 9.1/2-1560 rpm. Spindl...

Rounds 800mm, Squares 1000mm x 1000mm. Capacity: Rounds 800mm Diameter, Squares 1000mm x 1000mm Up To 380mm Long. Input: 415/3/50 ac 11 kW. Speeds: 17-65 Metres Per Minute. Vice opens: 1050mm. Twin vices: Yes. Fitted with Hydraulic Front Ta...

Lift height 4500mm. Fitted with hydraulic lift,tilt and side shift controls.  This forklift was fitted with new forks and new lift chain in September 2016.

Year of Manufacture: 1999. Capacity: 7 ton / 7112 Kg. Engine: Diesel. Maximum Load: 7 ton / 7112 kgs. Maximum Lift Height: 5 Metres. Tines: 1800mm Long x 150mm Wide. Maximum Spread of Tines: 1400mm.

Number of pads: 6. Dimensions of pads: 44" x 26" / 1118mm x 660mm. Capacity of each pad: 2200 kgs. Input: 415/3/50 ac. Maximum centre distance between pads: 33'10" / 10.31m.

Number of pads: 8. Capacity of each pad: 1565 kgs. Pad dimension: 725mm x 725mm. Maximum centre distance between pads: 11,300mm. Minimum centre distance between pads: 1100mm. Input: 415/3/50 ac 2.2 kW. Equipped with Remote Control Unit.

Number of pads: 1. Dimensions of pads: 36" x 36" / 914mm x 914mm. Input: 415/3/50 ac.

Number of pads: 1. Dimensions of pad: 36" x 36" / 914mm x 914mm. Input: 415/3/50 ac.

Amperage: 400 amp. Input: 380/420/3/50 ac. Duty cycle: 400 amps @ 80% or 380 amps @ 100%. Fitted with Gun & Leads.

Amperage: 420 Amps. Input: 380/420/3/50 ac. Duty cycle: 420 amps @ 80% or 400 amps @ 100%. Fitted with Gun & Leads.

Amperage: 420 amp. Input: 380/420/3/50 ac. Duty cycle: 420 amps @ 80% or 400 amps @ 100%. Fitted with gun.

Capacity: 60 amp. Thickness of Cut: Up to 25mm. Plasma Duty Cycle: 60 amps @ 40%, 50 amps @ 60% or 30 amps @ 100%. Input: 400/3/50 ac. Fitted with Torch.

Capacity: 3mm Minimum - 50mm Maximum. Angle range: 25 Degrees-55 Degrees. Input: 415/3/50 ac 4 kW. Support roll rise & fall: 50mm. Fitted with 1 x Cutter.