Mounsey Engineering

Table 1070mm x 500mm. Traverses X = 1020mm. Y = 510mm. Z = 510mm. ATC Capacity 20 Tools. Spindle Nose 40BT. Spindle Speed to 8000RPM. S/No Z10963 - 1999

Max Swing Over Bed 550mm. Max Machining Dia 280mm. Max Turning Length 520mm. Traverses: X = 216mm. Z = 520mm. With 8 Station Turret. Tail Stock S/No E10324- 1995

Max Swing Over Slide 260mm. Bar Capacity 42mm. Max Turning Length 200mm. Controlled Axes: X & Z. With 12 Station Turret. Tail Stock S/No 193

Capacity 254mm Dia Swing x 457mm B.C. (10" x 18") With Plain Wheel Head & Swivelling Work Head. S/No 90292

Table 1245mm x 290mm with Power Long Feed. Spindle Nose 40 Int. S/No 10326 - 1984

Capacity 457mm x 152mm (18" x 6") With 250mm x 127mm Magnetic Chuck. S/No 1727

Table 1066mm x 228mm with Power Long Feed. Spindle Nose 30 Int. S/No L-101

Table 80mm x 215mm with Power Feeds. Spindle Nose 30 Int. With Arbor Support Bracket, Collet Chucks & Collets

Swing Approx 305mm x 457mm B.C. Speeds 54-1200 RPM. With Quick Change Tool Post & Holders. S/No F2/67587

Wheel Width 100mm. With Work Rest, Wheel Dressing. S/No 462311 549404-15 - 1963

Capacity 1mm to 32mm Diameter. With 110mm 6 Jaw Chuck & Cams.

Capacity 160mm Diameter. S/No 68-0216 - 1986

Capacity: Swing 254mm x 508mm B.C. (10" x 20"). Note No Tail Stock Available. Used as Boring Machine with Fixture. Variable Speeds 35 to 3000RPM. S/No A1126

Capacity: 280mm Dia Swing x 500mm B.C. With Quick Change Tool Post & Holders. Speeds 15 to 3550 RPM. S/No 5253

Speeds 125 to 2800RPM. With 6 Station Turret, Turret Tooling, Collet Chuck & Quantity of Collets.

Blade 250mm Dia. With Mitring Vice. Coolant.

With 457mm x 152mm (18" x 6") Magnetic Chuck

Table Approx 457mm x 200mm. Throat Approx 140mm

Speeds 86 to 3350RPM. With 13mm Capacity Drill Chuck. Table 280mm Dia. Throat Approx 190mm. S/No A7170

Wheels Approx 200mm Dia x 25mm Wide. S/No 6727

Not Recommended for Shipping Use. Approx Dimensions 20' x 8' x 8'. No Contents.

Capacity 10.2 bar. S/No 24730

Max Capacity 2240 lbs. S/No 6416211. Untested

Max Capacity 7 cwt. S/No 83186. Untested

240 Volts Single Phase. Speeds 190 to 3200RPM. With 16mm Capacity Drill Chuck. Spindle 2 Morse Taper. Table 280mm Dia. Throat Approx 165mm.

240 Volts Single Phase. With 6mm Capacity Drill Chuck. Table 150mm x 180mm. Throat Approx 150mm.

Table Diameter 210mm. Throat Approx 127mm. S/No 9247

Belt Width 100mm

Throat Approx 140mm. S/No E65479/3

Stroke Approx 400mm. Distance Between Frames Approx 508mm.

Wheel Approx 145mm Dia.

110 Volt Single Phase

Throat Approx 150mm. Table to Under Guides Approx 222mm

Throat Approx 150mm. Table to Under Guides Approx 222mm

Sizes: 2 off 200mm. 1 off each: 190mm - 165mm - 135mm & 125mm Diameters

Includes: 3 off Swivel Angle Plates & 1 off Box Angle

S/No 2810921

Single Phase 240 Volts. Approx Dimensions 400mm x 400mm x 500mm Deep

With Keys - Approx Dimensions: 500mm x 482mm x 760mm High

3m long x 1.8m high x 0.9m wide, 6 levels, 3 locations per level, (material not included)

All sections 2.4m high, 7off 800mm wide, 2off 600mm wide (buyer to disassemble) - (easily assembled to create a clean area) 

With 2.1/2" Dia Through Bore