Poole Precision Engineering

Table Size 1320mm x 279mm. Taverses: X = 890mm. Y = 457mm. Z = 508mm. Spindle Nose 40 Cat / DV. With Swivelling Head. Power Draw Bar. S/No B30-0093 - 1998

Swing over Bed 390mm x 1250mm B.C. Swing over Cross Slide 240mm. Swing in Gap 580mm. S/No 6/0004/14858

Swing over Bed 360mm x 1000mm B.C. Spindle Speeds 31.5 to 1600RPM. S/No RG14670630H37

Capacity 240mm Dia Swing x 600mm BC . With Swivelling Wheel Head, Swivelling Table & Work Head. S/No 586/439-HG

Table Area 650mm x 470mm. Spindle Speeds 75 to 2000 RPM. With 348mm Dia SIP Rotary Table. S/No 6307

Table Area 600mm x 350mm. Magnetic Chuck 600mm x 300mm. With Wheel Head Mounted Dressing Unit & Coolant.

Swivelling Table Area 1295mm x 292mm. Spindle Nose 50 Int. Speeds 51 to 1330RPM. With Slotting Attachment, 150mm Plain Machine Vice, 2 off Arbor Supports. S/No DD667

Swivelling Table Area 1295mm x 292mm. Spindle Nose 50 Int. Speeds: Horizontal 51 to 1330RPM - Vertical 44 to 1800RPM. With Arbor Support. S/No 72292

Table Area 1066mm x 300mm. With Power Feeds. Spindle Nose 30 Int. Speeds 65 to 4750RPM. S/No V2756

Table Area 457mm x 152mm (18" x 6") Magnetic Chuck 450mm x 150mm. S/No BO 77423

Approx Capacity 260mm Dia - 300mm Wide. S/No 1-17864 - 1997

Table 550mm x 350mm. Tank Area Approx 665mm x 415mm. With 50A Mark 2 Generator, Tank & Tooling.

Range to 600mm. With TVA-30 Printer & Accessories. S/No 11133/ID:4

Table 482mm x 482mm. Throat 609mm. With Blade Welder / Grinding Unit. S/No 61238

With PF-150 Filter, Quantity of Honing Tools & Equipment. S/No 88315

Table Area 950mm x 130mm. With Universal Work Head. Universal Motorised Wheel Head, Wheel Guards etc

S/No TL K/42. Please Note: This Lot is Located on a Mezzanine Floor.

Screen Approx 500mm x 500mm. S/No 783

Dimensions: 914mm x 609mm x 100mm Thick. - Height from Floor 787mm. S/No 10399

With Wire Feed. S/No 337 502-0026

Max Working Pressure 10.2 Bar. S/No 14404

Capacity 1500 lbs. With Battery Charger. S/No 3-4556. Untested

240 Volt Single Phase

240 Volt Single Phase.

Suitable for Lot 1

240 Volt Single Phase. With Drill Chuck. S/No 75-291

Belt Width 100mm

Throat Approx 140mm

Table Diameter 300mm. S/No 4374-1972

Note: Chucks May Require Attention

Includes 2 off Colchester 190mm (Approx) Centre Height

Max Capacity 200kg. - Untested

Includes 2 off Swivel Angle Plates & 1 off Box - 450mm x 300mm x 225mm

Untested

Centre Height Approx 100mm with 100mm Diameter 3 Jaw Chuck

Plus 2 off Plain Machine Vices 85mm & 70mm Wide. And Bench Vice 60mm Wide

Includes 2 off 50 Int

Diameters - 70mm, 80mm & 100mm

Suitable for Lot 1

Approx Dimensions: 765mm Wide x 705mm Deep x 1255mm High. No Contents

Approx Dimensions: 1070mm Wide x 500mm Deep x 1060mm High. No Contents

Approx Dimensions: 895mm Wide x 465mm Deep x 1200mm High. No Contents

Approx Dimensions: 675mm Wide x 465mm Deep x 765mm High. No Contents

Approx Dimensions: 910mm Wide x 455mm Deep x 1825mm High. No Contents

Approx Dimensions: 1210mm Wide x 455mm Deep x 1830mm High. No Contents

Approx Dimensions: Single: 320mm Wide x 450mm Deep x 985mm High. Double: 615mm Wide x 450mm Deep x 985mm

Approx Dimensions: 1210mm Wide x 455mm Deep x 1830mm High. No Contents

Throat Approx 630mm. Please Note: This Lot is Located on a Mezzanine Floor.

Throat Approx 75mm. Please Note: This Lot is Located on a Mezzanine Floor.

Please Note: This Lot is Located on a Mezzanine Floor.

Table Diameter Approx 200mm. Please Note: This Lot is Located on a Mezzanine Floor.

Please Note: This Lot is Located on a Mezzanine Floor.

S/No 920810 3 - Untested

Untested

Includes: Gauge Blocks, Sine Bar, Depth Micrometer, Height Guage, Glass Surface Plate, Hardness Standard Block, DTI's Rules etc.

Includes: Drill Doctor 240 Volt Drill Grinder, Drill Holding Fixture & Motorised Grinding Spindle - Inclomplete.

240 Volts - Single Phase

Magnet 455mm x 100mm with Controller

Area 305mm x 305mm

Belt Width 25mm. S/No 8092

Approx Dimensions: 610mm x 610mm x 105mm Thick.

6kw. 240 Volts - Single Phase. Approx Internal Dimensions: 370mm x 370mm 400mm. S/No 1070

S/No 8268

240 Volts - Single Phase

240 Volts - Single Phase

Throat Approx 108mm

Throat Approx 85mm. S/No 11491

With Fabricated Work Bench - Approx Dimensions: 2025mm x 915mm x 870mm High

With Fabricated Work Bench - Approx Dimensions: 1040mm x 660mm x 940mm High

Not Contents. Approx Dimensions: 1480mm x 600mm x 1950mm High & 1400mm x 600mm x 900mm High