Ravenace & Others

Year of Manufacture 1997, Control Fanuc 18-T, Table Size 1450mm, Swing 1650mm, Height Under Cross Slide 810mm, Cross Slide Rise & Fall 430mm, Turret Rise & Fall 750mm, Speeds Variable up to 150 rpm, Variable Feed Rate, Input 415/3/5...

Table Size 60" x 48" / 1524mm x 1219mm, Sub-Table Size 98" x 60" / 2489mm x 1524mm, Table Longitudinal Traverse (Y) 50" / 1270mm, Table Cross Traverse (X) 84" / 2134mm, Head Stock Vertical Traverse (Z) 62"...

Year of Manufacture 1997, Control Haas, Table Size 40" x 18" / 1016mm x 457mm, Table Load 3500lbs / 1588 kgs, Longiudinal Traverse X Axis 40" / 1016mm, Cross Traverse Y Axis 20" / 508mm, Vertical Traverse Z Axis 25"...

Table Size 1370mm x 660mm, Longitudinal Traverse Table X Axis 1270mm, Cross Traverse Table Y Axis 660mm, Vertical Traverse Head Z Axis 660mm, Speeds 60 - 8000 rpm, Feed Rate 3 - 15,000mm Per Minute, Spindle Taper BT 40, Automatic Tool Chang...

Height of Centres 315mm, Between Centres 2000mm, Swing Over Bed 640mm, Swing Over Cross Slide 380mm, Swing in Gap 850mm, Spindle Speeds 9 - 1600 rpm, Spindle Bore 82mm, Tail Stock No. 5 Morse Taper, Quick Change Gearbox - Imperial/Metric, G...

Height of Centres 8" / 203mm, Between Centres 80" / 2032mm, Swing Over Bed 16" / 406mm, Swing Over Cross Slide 9" / 229mm, Swing in Gap 24" / 610mm, Spindle Speeds 40 - 2000 rpm, Spindle Bore 2.5/8" / 67mm, Tai...

Year of Manufacture 1995, Height of Centres 7.1/2" / 191mm, Between Centres 50" / 1270mm, Swing Over Bed 15" / 381mm, Swing Over Cross Slide 9" / 229mm, Swing in Gap 23" / 584mm, Spindle Speeds 15-2500 rpm, Spindle ...

Height of Centres 10.3/4" / 273mm, Between Centres 24" / 610mm, Swing Over Bed 21.3/4" / 552mm, Swing Over Cross Slide, 14.1/2" / 368mm, Swing in Gap 35" / 889mm, Spindle Speeds 20-1000 rpm, Spindle Bore 3.1/2"...

Height of Centres 190mm, Between Centres 1500mm, Swing Over Bed 380mm, Swing Over Cross Slide 230mm, Swing in Gap 580mm, Spindle Speeds 40 - 2200mm, Spindle Bore 50mm,Tail Stock No. 4 Morse Taper, Quick Change Gearbox Imperial/Metric/Mod/dp...

Table Size 48" / 1219mm, Swing 54" / 1372mm, Height Under Cross Slide 29.1/2" / 749mm, Turret Rise & Fall 32" / 813mm, Turret Traverse 30" / 762mm, Speeds 4.5-100 rpm, Feed Rate 0.0025"-0.125" / 0.064M...

Centre Height 330mm, Distance Between Centres 2500mm, Maximum Swing on Bed 600mm, Swing Pass Milling Head 500mm, Milling Head Cross Traverse 150mm, Input 380/3/50 ac, 4 Jaw Chuck size 450mm, Equipment Quantity Of Change Gears, Additional Mi...

Table Size 2500mm x 600mm, Longitudinal Table 2000mm by Power, Vertical Traverse (Head) 900mm by Power, Cross Traverse (Table) 550mm by Power, Spindle Taper Horizontal 50 INT, Spindle Taper in Vertical Head 50 INT, Ram In/Out 500mm by Hand,...

Table Size 1705mm x 360mm, Table Swivels, Table Left/Right 1180mm Hand or Power, Table In/Out 350mm Hand or Power, Table Rise & Fall 450mm Hand or Power, Speeds 65 - 1500 rpm, Feed Rate 13/32" - 33.1/4" / 10mm - 845mm, Input 4...

Table Size 42" x 9" / 1067mm x 229mm, Table Left/Right 26.1/2" / 673mm By Hand or Power, Table In/Out 12" / 305mm by Hand, Tabe Rise & Fall 16" / 406mm by Hand, Speeds 50 - 3750 rpm, Variable Feed Rate, Input 38...

Year of Manufacture 1987, Table Size 49.1/4" x 11.1/2" / 1.25m x 292mm, Table Left/Right 30" / 762 by Hand or Power, Table In/Out 13" / 303mm by Hand or Power, Table Rise & Fall 17" / 432mm by Hand or Power, Spe...

Arm Length 4'6" / 1372mm, Base Area 54" x 39.1/2" / 1372mm x 1003mm, Arm Rise & Fall 26" / 660mm, Head Traverse 38" / 965mm, Input 380/420/3/50 ac 4 kW, Spindle Speeds 18 - 1500 rpm, Spindle Bored No. 5 Morse Ta...

Table Size 15.3/4" / 400mm x 13" / 330mm, Table Left/Right 19" / 483mm, Table Rise & Fall 10" / 254mm, Toolbox Rise & Fall on Canting Head Stock 4" / 102mm, Swivels 60 - 0 - 60 Degrees, Input 400/440/3/50 ac...

Table Size 700mm x 660mm, Sub Table 560mm x 330mm, Tilts 15 - 0 - 45 Degrees, Input 415/3/50 ac 2.2 kW, Speeds 50' - 3600' / 15.24m - 1,097.28m Per Minute, Throat 36" / 914mm, Daylight 12" / 305mm, Fitted with Bandsaw Brazer, Shea...

Table Size 800mm x 315mm, Table Left/Right 500mm, Table In/Out 200mm, Throat 380mm, Daylight 400mm, Speeds 3 Off, Head Swivels 25 - 0 - 25 Degrees

Capacity 120 CFM, Input 415/3/50 ac 22 kW, Screw Type Compressor Unit, CFM 120, PSI 100

Year of Manufacture Dec-10, Capacity 420mm Diameter or 420mm x 420mm Square, Input 415/3/50 ac 5.5 kW, Speeds 16-85 Metres per Minute, Vice Opens 420mm, Twin Vices, Stroke of Feed Vice 500mm, Multi Feed, NC Control, Fitted with Work Height ...

Year of Manufacture 2005, Capacity 400mm Diameter or 400mm x 400mm Squares, Input 415/3/50 ac 5 hp, Variable Speeds, Vice Opens 430mm, Twin Vices, Stroke of Feed Vice 500mm, Multi Feed

Capacity Rounds 9" / 229 mm Diameter, Rectangular 12" x 7" / 305mm x 178mm, Input 400/3/50 ac 1.1 kW, Speeds 26 - 95 Metres per Minute, Swivel Jaw Vice, Vice Opens 12.1/2" / 318mm, Fitted With Variable Downfeed & Coo...

Grinding Diameter Internal Range 1" - 40" / 25mm - 1016mm, Swing Over Bed 46" / 1168mm, Table Traverse 28" / 711mm, Table Traverse Speed - Variable, Work Head Speeds 8 Off, Work Head Swivels 45-0-45 Degrees, Work Head Of...

Table Size 20" x 8" / 508mm x 203mm, Longitudinal Traverse 21" / 533mm, Cross Traverse 9" / 229mm, Cross Feed 0.015" / 0.381mm, Wheel Head Rise & Fall By Power, Table Speed 2' - 100' / 610mm x 30,480mm Per Minut...

Year of Manufacture 2005, Capacity 450mm x 150mm, Table Size 450mm x 175mm, Longitudinal Traverse 438mm, Cross Traverse 178mm, Wheel Head Rise & Fall By Hand, Input 415/3/50 ac 1.5 hp, Nominal Stone Size 178mm Diameter x 13mm Wide, Magn...

Model E20PL-01, Year 2007, Lift Height 6200mm, Side Shift, With Charger

Model R20, Year 2006, Lift Height 6500mm, Side Shift

Sliding Table Size 2000mm x 370mm, Spindle Speeds 3000-5000 rpm, Spindle Tilts 0-45 Degrees by Power, Spindle Rise & Fall By Power, Fitted with Programmable Fence up to 1300mm

Sliding Table Size 3200mm x 370mm, Spindle Speeds 3000-5000 rpm, Spindle Tilts 0-45 Degrees by Power, Spindle Rise & Fall By Power, Fitted with Programmable Fence up to 1300mm