Shropshire Pine Company

Model: CNC 65 TDRE. Serial No. 080707. Mild Steel: 65mm OD x 2.0mm wall. Non-Ferrous: 65mm OD x 3.5mm wall. Stainless: 65mm OD x 1.4mm wall. SQ Mild Steel: 50mm x 2.0mm. Rear pusher to mandrel: 4m.

Type: HST.C 31/6. Year: 1998. Serial No. 25758. Capacity: 3100mm x 6mm. 17 x hydraulic clamps. Features finger guard, variable rake, wander type footswitch and rear pneumatic, sheet support system.

Model: 100X3100 PR6. Serial No. 96P230. M/C No. 1020. Cybelec DNC 800, CNC Control. Capacity: 3100mm x 100 TON. Max stroke: 215mm. Max speed: 100mm/sec. Features backguage and Smart Scan Infra-Red light guarding and wander type footswitch.

Model: Challenge 333. Year: 2000. Serial No. 4404198. Features Viet, FCS Control. Capacity: 1300mm x 200mm. Belt Dimensions: 2620mm x 1380mm.

Model: AP 7000/CNC/L 8171. Between centres: 3000mm. Centre height: 300mm. Max swing over bed: 600mm. Max swing over saddle: 400mm. Spindle speed: 260-3800 RPM. Complete with accessories, including barley twist attachment.

Model: AP 7000/CNC/L 8171. Year: 2000. M/C No. 716. Between centres: 3000mm. Centre height: 300mm. Max swing over bed: 600mm. Max swing over saddle: 400mm. Spindle speed: 260-3800 RPM. Complete with accessories, including barley twist attac...

Type: F4TL. Year 2006. Serial No. AG 1.05361. Features ASEM CNC control. Max dia, profile cutter: 240mm. Max dia, tenoning cutter: 350mm. Speed: 6000/3500 RPM.

Model: Euro 5.1. Year: 2006. M/C No. 4297. Capacity: 3.2 mtr x 3.2 mtr. Max blade dia: 300mm. Fitted with scribing blade. Max cutting height: 72mm. Cutting speed: 0-80 mtr/min. Features CNC control unit, and 3 x front sheet supports.

Year 2007. Serial No. AH/112922. Capacities; Panel thickness: 8-55mm. Panel thickness with round unit: 10-45mm. Thickness of edges in strip: 0-4.5mm. Rolled edges thickness: 0-4.3mm. Minimum panel width with rolled edges: 65mm. Feed speed: ...

Model: BD-NV. Year 2005. Serial No. 7476. Capacities; Max slot depth: 110mm. Max/min slot length: 100/25mm. Min slot width: 6mm. Max chisel length: 210mm. Max chisel thickness: 20mm. Max workpiece height: 145mm. Max workpiece width: 140mm. ...

Model HPB-40. Year 2014. Serial No. 54050256. Capacities; Flat: 200mm x 24mm. Round tube: 60mm x 5mm. Stroke: 285mm. Return/approach speeds: 10mm/sec.

Model: PRM 40 FH. Year 2015. Serial No. 199039. Capacity: see pictures. Features free standing control console.

Model: RBM 1050-30 E. Year 2015. Serial No. 54587. Capacity: 1050mm x 3mm. Roll dia: 90mm. Roll Speed: 6 mtrs/min. Actuated via wander type footswitch.

Type: VHKM. 2004. Year 2000. M/C No. 654100039. Capacity: 200mm x 200mm x 4mm. Stroke: 40mm. Stroke per min: 30. Actuated via wander type footswitch.

Model: DAR-35-S. Serial No. 459080689. Turntable speed: 13 RPM. Capacity: 35mm. Yield strength: 250 N/mm2.

Model JF-1631. Max Resolution: 1200 x 1200 DPI. Vacuum table area: 3200mm x 1700mm. Holds 8 UV ink cartridges.

Type GD SU. Serial No. 99 1563. Test No. 97302. Capacity: 230mm x 120mm. Spindle sequence: 1st Bottom-Right-Left-Top-2nd Bottom-Universal Infeed table: 1955mm.

Turning diameter: 3mm-65mm. Turning length: 3mm-120mm. Chucking length: 800mm. Drilling depth up to 80mm. Spindle speeds: 1600/2800/5000 RPM. Features Pilz Control Unit.

Weima Briquetting Press. Type C150. Year 2008. Serial No. 910-487. Briquett- 50mm. Output: 30-50 kg/hr.

Model: 29/S. Serial No. PZB000072. 32mm spindle centres. 29 spindle drill bank. Can be used horizontally and vertically.

Model: C8. Serial No. 79229. Table area: 1110mm x 760mm. Throat: 780mm.

Model: T630. Serial No. 85509. Capacity: 630mm x 250mm. Table area: 1000mm x 630mm. Table Rise/Fall: 250mm (by power). Fitted with 4 blade cutterblock. Cutterblock speed: 4500 RPM.

Model: UXB1. Machine No. 82494. Throat: 915mm. Table area: 900mm x 770mm. Spindle speeds: 10,000, 20,000 RPM. Actuated via wander type footswitch.

Nominal blade diameter: 350mm. Actuated via foot lever.

Complete with power feed. Table area: 1100mm x 780mm. Spindle speeds: 3000-8000 RPM.

Model: DK1100. Actuated via wander type footswitch.

Model: T500. 500,000 BTU/HR. Opening size: 540mm x 540mm. Right hand door.

Model: T500. 500,000 BTU/HR. Opening size: 540mm x 540mm. Left hand door.

Model: CS-C425 SA. Year 2012. Serial No. 426075. Max blade diameter: 425mm. Max vice opening: 153mm. Capacity @ 45 degrees; Round bar: 60mm. Square tube: 100mm x 100mm. Round tube: 114mm. Rectangle tube: 100mm x 49mm. Capacity @ 90 degrees;...

Type: RLR 25 AM8. Year 2005. Serial No. WCF 150163. Max working pressure: 7.5 Bar. Supplied with Ingersoll Rand air dryer and free standing air receiver.

1 x RDM drying oven (Gas Fed) with double door opening. Opening dimensions: 4700mm x 2200mm. 1 x Spray booth/extraction unit. 2100mm x 2200mm. 1 x Wagner Prima Sprint, powder coating gun (mobile).

Model: Heliarc 283i. AC/DC Range: 4-280 amp. Complete with tig gun and leads. Mounted on wheels.

Model: migC2503PH. Serial No. 626-503-0499. 250 amp @ 35% 190 amp @ 60% 150 amp @ 100% Complete with built in wire feed.

Nominal blade diameter: 350mm. Twin Vice. Pneumatic clamping to vice. Saw head swivels: 90°- 0°- 45°.

Model: 566. Serial No. 1163. Belt Width: 2”. Features P.B.S.

Year 2001. Serial No. 54310268. Blade diameter: 400mm. Blade bore: 30mm. Head tilts 0-45mm for mitre cuts. Max cutting depth: 125mm. Max cutting width; 550mm.

Ref No. LT 10036. Serial No. 7889 JW. Table areas: 46” x 18”. Features P.B.S.

Model: M3. Serial No. 11809. Table area: 405mm x 210mm. Features P.B.S and qty chisels.

Model: 571. Table area: 510mm x 155mm. Features P.B.S and fitted chisel.

Model: T500. 500,000 BTU/HR. Opening size: 540mm x 540mm. Right hand door.

Model: KL260 B/C. Year 2018. Output: 400-600 kg/hr.

Nominal working pressure: 7.5 Bar. Features pressure gauge and Hour meter, reading: 30686 hrs.

Model: AC1350. Year 2012. Serial No. 221205667. Max working pressure: 10 Bar/ 145 PSI. Mounted on 50 ltr, air receiver. 110 volt. Mobile, mounted on wheels.

Delivering 5 TON pressing power. Throat: 10” Table area: 18” x 12”. Mounted on mobile steel table.

Model: 1612. Serial No. 47289. 2920 RPM.

Features on/off switch, work rest and stone guards. Nominal stone diameter: 200mm.

Model: No.2. Table area: 2’ x 8”. Features P.B.S.

Model: TDS-12. Serial No. 19302. Nominal stone diameter: 16”. Features tool holder and P.B.S.

Model: UCC 25. Year 2012. Serial No. 9272-U. Capacity up to 30 ltr cans. Up to 2.5 TON, pressing power.

Model NC-1327T. Serial No 01-86014. Year 1997. Fanuc Control. 2700mm x 1300mm vacuum table. Twin Head c/w Tool-changers. Vacuum Pump **SOLD AS SPARES OR REPAIRS**

Main motor: 30KW. To include qty ducting. **VIEWING IS HIGHLY RECOMMENDED**

Complete with control unit. Mobile, mounted on wheels. Clamps in/out: 360mm. Max width: 630mm. Max length: 2450mm.

Year 1997. Serial No. 0201486. Nominal blade diameter: 350mm. Table area 680mm x 150mm. Saw head swivels: 45° – 0° - 45° Features work guide. 400V.

Year 2011. Serial No. 01970. Nominal blade diameter: 350mm. Table area 680mm x 150mm. Saw head swivels: 45° – 0° - 45° Features work guide. 240V.

Year 2002. Serial No. 1201534. Nominal blade diameter: 350mm. Table area 680mm x 150mm. Saw head swivels: 45° – 0° - 45° Features work guide. 400V.

Serial No. B11310

Serial No. 1232812-89

Year 1997. Serial No. C7781. Table area: 350mm x 350mm. Throat: 340mm. Table tilts: 15°- 0° - 45° 240 V.

M/C No. 27832. Spindle speeds: 475-4260 RPM. Fitted with ½” Jacobs style chuck. Fitted in wooden bench. Features chuck guard.

Model: RT350. Serial No. 694375 Complete with stick gun.

Model: RT180. Serial No. 831114.

Model: RT180. Serial No. 742566. Complete with stick gun.

Model: Bantam180. Complete with stick gun and earth clamp.

415V

415V.

Year 2014. Reg: BF63 YLC. Revenue Weight 3500KGS Gross. Mileage: 122586. (*will increase slightly*). 2 Axle Rigid Body. Cylinder Capacity 2198cc. Fuel Heavy Oil.

Dimensions: 1810mm (w) x 1210mm (d) x 1950mm (h). Single door access.

Complete with bottom shelf for easy storage **Vice and contents not included**

Max Allowable Timber: 1180mm.

Max Allowable Timber: 1330mm.

Size 1100mm x 1900mm. Grit: P60.

Size 1100mm x 1900mm. Grits: P100 & P120.

3 Phase. Features P.B.S.

Model: BTS252. Serial No. 09080156. Nominal blade diameter: 254mm. Max cut: 80mm. 240 V.

3 phase. Complete with bag and P.B.S.

Complete with hose and mounted on trolley.

1 x Abac, single phase. 1 x Jefferson, 110 volt.

Dimensions: 2700mm (w) x 2300mm (h) x 880mm (d).

Model: AGS, M/C No. 823485, Nominal blade diameter: 350mm. Blade tilts 90-45 degrees. Table area: 920mm x 865mm. Sliding table area: 785mm x 350mm. Features P.B.S and workfence.

Model: MSP310M, Year 2007, Serial No. 138181. Table area: 605mm x 330mm, Thicknessing table area: 750mm x 310mm, 4 blade cutterblock. Features cutter block guard and workfence. **NEEDS NEW STARTER**

Serial No. ZE 210022. Features 4 x 16 amp outlets and 2 x 32 amp outlets. Input 230V, Output 110V.

Serial No. ZE 210027. Features 4 x 16 amp outlets and 2 x 32 amp outlets. Input 400V, Output 110V.

Feed speed: 3.2 - 63 mtrs/min. Complete with adjustable arm.

Tine length: 1000mm. Tine width: 680mm.

Dimensions: 2555mm x 1220mm. Complete with under bench storage.

Dimensions: 1830mm x 950mm. Features under bench storage and rear shelving.

Dimensions: 2555mm x 1240mm. Features under bench storage.

Dimensions 1950mm x 1220mm. Features under bench storage.

Dimensions: 2555mm x 1250mm. Features under bench cupboard.

Dimensions: 2440mm x 1220mm. Features under bench storage.

Dimensions: 990mm (l) x 490mm (w).

Dimensions: 990mm (l) x 490mm (w).

Dimensions: 990mm (l) x 490mm (w).

Dimensions: 1220mm (l) x 700mm (w).

Dimensions: 1520mm x 750mm.

Dimensions: 3000mm x 640mm.

Tine length: 1000mm. Tine width: 520mm.

Tine length: 1150mm. Tine width: 540mm.

Pneumatic, Seat Pad Press. Mounted on wooden table. 380mm throat.

Complete with trolley and hose.

230 volts.

Capacity: 18g nails 15-50mm, 90 staple 15-40mm.

Capacity: 18g 15-55mm.

To include: 1 x Black & Decker sander. 1 x Black & Decker planer. 1 x Black & Decker pistol drill.

Model: T55S4. Capacity: 16 gauge, 1/2" crown, 2/8" max lg staples.

Model: BW1036.

1 x Makita, 110V. 1 x Power, 230V.

Capacity: 14 staples, 19-50mm (l). Complete with qty of staples.

1 x Bisch, 230V. 1 x Wurth, 230V.

1 x opened boxed, some used. 3 x full boxes, 36 rolls in each.

Complete with carry case. 110V.

Complete with qty formers.

Year 1997. Rated to 11 Bar.

Capacity: 500kgs, 0.35m3.

Currently turned into sanding machine. Features P.B.S.

1 x 12 tread. 1 x 4 tread.

Dimensions: 21' x 8'. Features windows to front and side, and access door. Currently set up as an office with storage area. Complete with kitchenette and power points.

Mounted on stand, complete with pedals. **SPARES AND REPAIRS**