Steelfields Ltd

Diameter of Table 5486mm. (18') Maximum Diameter Swing 5562 mm. Approx Maximum Distance from Chuck to Underside of Cross Slide 3886mm. S/No 1 Order No 17786. Video Available Shortly

Spindle Diameter 152mm (6"). Spindle Traveres 1066mm. Ram Traverse 762mm. Vertical Traverse 3657mm. Horizontal Traverse 1828mm. Table Long Traverse 6096mm

Capacity 6400 KN - Max Length 7.3M. Distance Between Frames 6.2M. With Upper & Lower Tooling & Sick Light Guards. S/No 3225 - 1983

Max Upstroke Pressure 900 Tons. Area of Upper & Lower Platens Approx 3.8M x 3.2M. Upper Platen Adjustable with Height Giving a Max Opening of 3048mm - Minimum 1524mm

Table Surface Height from Floor Approx 787mm.

Max Distance Between Centres 19.2M (63'). Centre Height 616mm (24.25") Max Diameter Swing over Cross Slide 914mm. Speeds 2.06 to 100 RPM. Main Motor 30 H.P. S/No 16787

Spindle Nose 6 Morse Taper. Speeds 5 to 450RPM. With Power Cross, Rotation & Rise & Fall. Two Sections of Bed Total 8M Long. Approx Travel 5.5M. S/No 23493 - 1957

Spindle Nose 6 Morse Taper. Speeds 9 to 775RPM. With Power Cross, Rotation & Rise & Fall. Length of Bed Approx 7.8M. Approx Travel 5.5M. S/No 23491 - 1958

Spindle Nose 5 Morse Taper. Speeds 16 to 430RPM. Approx Traverses: Long 7.5M. Vertical 4.5M. S/No 25831 - 1958

Spindle Nose 6 Morse Taper. Speeds 6.7 to 587RPM. Approx Traverses: Long 7.5M. Vertical 2.75M.

Table Diameter 2500mm. Max Diameter Swing Approx 2700mm. Max Height Under Cross Slide Approx 1600mm. Main Motor 45KW. Speeds 1.7 to 89 RPM. S/No 370696/3

Stroke 533mm (21") Rotary Table 1143mm (245) Diameter. Throat Approx 914mm. Max Height Under Guides 812mm. With Pendant Control. S/No 23303

Capacity 3048mm x 25mm (10' x 1") With Blade Gap Adjustment, Power Back Gauge, Squaring Arm & 3 Support Arms. Machine No 714002

Capacity 150 Tons x 2438mm (8') with 14 1/2" & 10 1/2" Diameter Rolls Plus Tooling & Equipment

Capacity 3657mm x 12.5mm (12' x 1/2") With Blade Gap Adjustment, Power Back Gauge, Squaring Arm & 2 Support Arms. Foot Pedal Control. S/No 9577

Single Ram. 254mm (10") Stroke. Max Opening Approx 762mm. With Extra Reverse Forming Tools on Pallet

Capacity 3048mm x 6.3mm (10' x 1/4") With Blade Gap Adjustment, Power Back Gauge, Squaring Arm & 2 Support Arms. S/No 6307802

With Single Cutting Head. Max Width Approx 6250mm. With Track - Some Dismantled - Giving Max Travel of Approx 11M. Machine No 1903916 - 1979

Throat Approx 914mm (36")

Indexing Rotary Table Diameter 1524mm (60"). S/No P24034

For: Punching, Shearing, Section / Angle Cutting, Notching etc - See Photo of Plate for More Information. S/No 17649

For: Punching, Shearing, Section / Angle Cutting, Notching etc - See Photographs of Plates for More Information. S/No 1512

Max Blade Diameter 400mm - Note No Blade Fitted

One Fixed Milling Head. One Adjustable Travelling Head. Each Head Has Powered Cross Travel of Approx 762mm

Spindle Nose 4 Morse Taper. Rotating Table 490mm x 400mm. Spindle Speeds 54 to 1032RPM. Power Feeds. Throat Approx 360mm. S/No 855-J

Approx Dimensions:- 3657mm x 1828mm (12' x 6') Each. x 330mm Thick

Approx Dimensions:- 5460mm x 1500mm x 304mm Thick

Approx Dimensions:- 5460mm x 1500mm x 304mm Thick

Approx Dimensions:- 2438mm x 1295mm x 165mm Thick - Height from Floor 787mm

Wheel Size Approx 14" Diameter x 2" Wide

Approx Dimensions: 1524mm x 1219mm x 457mm (60" x 48" x 18") Each

Approx Dimensions: 2006mm x 1066mm x 610mm (79" x 42" x 24")

Approx Dimensions: 3657mm Diameter x 178mm Thick (144" x 7")

With 1 off Burning Head. Span Approx 4267mm (14') with Dismantled Track Approx 4.8M (16')

SWL 5 Tons. Approx Span 18.2M (60') with Approx 36.5M of Track & Bus Bar - Untested

Untesed - Previously Used with Lot 35 - Wheel Centres 44"

Untesed - Previously Used with Lot 35 - Wheel Centres 44"

Spindle Nose 4 Morse Taper. Swivelling & Tilting Table 430mm x 430mm. Spindle Speeds 54 to 1032RPM. Power Feeds. Throat Approx 330mm. S/No 157-D

41" Diameter Suitable for a Horizontal Boring Machine - Inspection Recommended

Capacity 400mm Diameter - with Mitring Jaws & Roller Tracking. S/No 380038 - 1977

For: Punching, Shearing, Section / Angle Cutting, Notching etc - See Photo of Plate for More Information. S/No 11202

Capacity upto 10mm Plate. Cone Rolls 2.2M Long. Diameter from Approx 80mm to 850mm

Capacity 4.5tonne at 500mm load centres, side shift carriage with 4` forks and maximum lift height of 4.25m. SN C9-00049. Untested.

Capacity 8tonne with jack legs down or 6tonne with them up at 700mm load centres, with 5`forks and 12`lift. Straight six Perkins 6-354 engine with ZF transmission. Untested

Capacity 22tonne at 1200mm centres, 8` forks and sideshift carriage powered by Perkins 8-510 diesel and Allison transmission. Max lift height of 12`. Untested

See Additional Document for more Information.