Ventilation Company & Others

Items Relocated for Convenience of Sale. Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item.

Ended: 20th September 2017 14:00
  • site
    LOT 1
    RAS 74-30 3200mm x 4mm CNC Folder. With System 9000 Control
    Top beam rise & fall 200 mm, Bottom beam adjustment 80 mm, Maximum length of bend 3200 mm, Maximum material thickness 4 mm, Angle of bend 0-135 degrees. A loading charge of £200 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 2
    SPIRO MRX Automatic Spiral Duct Forming Machine
    Diameter range 80-1250mm, Material thickness 0.4-1mm , Strip width 120mm, Decoiler load Up to 600 kgs, Coil diameter Up to 1150mm, Input415/3/50 ac 15 kW, Equipment 1.6m Long Run Off Table, Cut Off Saw and Quantity of Forming Heads - 1 @ 75...
    Sale has ended
  • site
    LOT 3
    SUTER Alpha 5 Spiral Duct Forming Line, 80 - 2000mm Diameter, 30 Forming Heads
    Year of Manufacture 1994, Diameter range Tube 80mm-2000mm, Material thickness Black or Galvanised Steel 0.4mm-1.25mm, Stainless Steel 0.4mm-1mm, Aluminium 0.4mm-1.25mm Strip width 60-160mm, Speed Strip 4-120 Metres per Minute, Input380/3/50...
    Sale has ended
  • site
    LOT 4
    TURNER & FOWLER 3000mm x 1500mm 40 Amp CNC Bed Type Plasma Cutter
    Cutting Length 3000 mm , Cutting Width 1500 mm, Thickness of Cut 6 mm, Amperage 40 amps, Input 415/3/50 Control Burny 3, Equipment Hypertherm powermax 600 plasma supply. A loading charge of £200 will be added to the buyer's in...
    Sale has ended
  • site
    LOT 5
    LVD PPBL-H-135/40 135 ton x 4000mm Hydraulic Downstroke Press Brake
    Year of Manufacture 1995, Back gauge Front Hand Operated, Guards Safety Scan Infrared, Capacity 135 ton / 137,160 kgs x 4000mm, Between frames 3130mm, Daylight 300mm, Throat depth 200mm, Stroke length 125mm, Input 415/3/50 ac 7.5 kw, Toolin...
    Sale has ended
  • site
    LOT 6
    KUMLA PV7H 2500mm x 10mm Hydraulic 3 Roll Double Initial Pinch Bending Rolls with Cone Bending Facility
    Capacity 2500mm x 10mm Rolling, Cone Rolling 5mm, Prebending 6mm, Length of rolls 2600mm, Roll diameter 240mm, Roll rise & fall Hydraulically. A loading charge of £200 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 7
    AKYAPAK APK-101 100mm x 100mm x 10mm Hydraulic Double Pinch Section Bending Rolls
    Year of Manufacture 2008, Capacity With Appropriate Rolls, Angles (Leg-Out)100mm x 100mm x 10mm, Angles (Leg-In)100mm x 100mm x 10mm, Square 60mm , Flats On Edge, 200mm x 35mm, Flats on Flat 125mm x 25mm, Input 415/3/50 ac 11 kW, Shaft Diam...
    Sale has ended
  • site
    LOT 8
    MEBUSA PH4020 40 ton x 2000mm Hydraulic Upstroke 2 Axis CNC Press Brake, Hurco Autobend 5C Control
    Capacity 40 ton x 2000mm, Between frames 1690mm, Daylight 300mm, Throat depth 200mm, Stroke length 100mm, Input415/3/50 ac 4 kW Approx, Tooling Full Length Top & Bottom Tooling. A loading charge of £150 will be added to th...
    Sale has ended
  • site
    LOT 9
    CREFCO EB 3000mm x 3.2mm Undercrank Mechanical Guillotine/Shear
    Capacity 3000mm x 3.2mm, Back gauge Hand Operated, Rapid blade adjustment, Work supports 2 @ 39" / 991mm, Squaring arms 1 @ 39" / 991mm. A loading charge of £150 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 10
    CREFCO 1325x3.2 bpfu 1325mm x 3.2mm Hydraulic Box & Pan Folder
    Top beam rise & fall 50mm, Bottom beam adjustment 20mm, Maximum length of bend 1325mm, Maximum material thickness3.2mm, Angle of bend 0-135 degrees. A loading charge of £100 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 11
    LUNA 8344 20/05 2000mm x 0.5mm 4 Roll CNC Bending Rolls with MyLoc 100 Control
    Year of Manufacture 1996, Maximum working length 2000mm, Maximum material thickness 0.5mm, Roll diameter 40mm, Control system MYLOC 100, Input415/3/50 ac 0.75 kW, Working speed 4.6 Metres per Minute. A loading charge of £100 w...
    Sale has ended
  • site
    LOT 12
    MW PYE 100N 100 Ton Hydraulic Press
    Table size 48" x 33". Throat depth 14", daylight 27". A loading charge of £200 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 13
    BODE 3000 Kgs Welding Positioner
    Table size 48" diameter, table height 47", variable speed control. A loading charge of £150 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 14
    OLIVER 9 Station Lockformer, 16g / 1.5mm Capacity
    Table size 59.1/2" x 24" / 1511mm x 610mm, Input 380/420/3/50 ac 1.5 hp, Machine set forDouble Seam and Standing Seam. A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 15
    WNS 7 Station Lockformer, 0.8mm - 1.6mm Capacity
    Table size 57" x 24" / 1448mm x 610mm, Input380/420/3/50 ac 1.5 hp approx, Machine set for Pittsburg & Double Seam. A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 16
    COMACA 200mm x 200mm x 3mm Corner Notcher
    A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 17
    COSEN AH-400H Automatic Horizontal Bandsaw, 400mm Capacity
    Year of Manufacture 2003, Capacity Rounds 400mm, Squares 400mm, Input380/420/3/50 ac 7.5 hp, Speeds 15-100 Metres Per Minute, Vice opens 510mm. A loading charge of £100 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 18
    BOGE S-20 80 CFM Compressor Outfit. With Dryer and Air Receiver. Serial NO. 35951
    A loading charge of £100 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 19
    Thomas Cut Off Bandsaw
    A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 19a
    Thomas 300sar Horizontal Bandsaw
    300 mm capacity. A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 20
    POLLARD 360 3' / 914mm Radial Drill. No.3 MT
    Table rise & fall 15" / 381mm, Head traverse 24" / 610mm, Input415/3/50 ac 1.5 kW, Spindle speeds 86 - 1920 rpm, Spindle bored No. 3 Morse Taper, Spindle rise & fall 8" / 203mm, Feed rate 0.077mm - 0.320mm, Fitted wit...
    Sale has ended
  • site
    LOT 21
    FINKBEINER Mobile 4 Column 28.8 Ton Vehicle Lift
    Year of Manufacture 2006, Capacity 7.2 ton per column = 28.8 ton, Wheel forks Adjustable for wheels 550 mm - 1140 mm diameter, Lifting stroke 1700 mm, untested. A loading charge of £100 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 22
    TOTALKARE Mobile 4 Column 30 Ton Vehicle Lift
    Year of manufacture 2007, forks for wheel size 700mm - 1400mm, lifting stroke 1600mm. Untested. A loading charge of £100 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 23
    MOTOPLAT Alternator/Starter Test Bench
    Model cv21le. A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 24
    Pels Universal Metalworker
    A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 25
    RJH Vertical Belt Linisher, With Dust Extractor
    A loading charge of £25 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 26
    KEMPPI Pro 4200 Evolution 420 amp Power Source
    Amperage 420 amps, Input380/420/3/50 ac, Duty cycle 420 amp @ 80% or 400 amp @ 100%.
    Sale has ended
  • site
    LOT 27
    MAGSTAR 351 400 amp Mig Welder
    A loading charge of £25 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 28
    LINCOLN 400 amp Mig Welder
    Model idealarc cv400-1. A loading charge of £25 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 29
    Oerlikon 60 amp Plasma Cutter
    Model ap217. A loading charge of £25 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 29a
    Cebora Plasma Prof 55 50 amp Plasma Cutter
    A loading charge of £25 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 30
    SIP 10kva Spot Welder
    Model 10n. A loading charge of £25 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 31
    Centauro co600 Vertical Bandsaw
    A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 32
    Startrite 20rwe Vertical Bandsaw
    A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 33
    Robinson 20" x 9" Over and Under Planer / Thicknesser
    Model Cadet. A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 34
    Wadkin Bobbin and Disc Sander
    Model JTA. A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 35
    Wadkin Bobbin and Disc Sander
    Model JTA. A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 36
    Sagar 20" Saw Bench
    A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 37
    Philipson Vertical Sander
    A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 38
    SAGAR 24" Saw Bench
    A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended
  • site
    LOT 39
    Wadkin 18" Cross Cut Saw
    A loading charge of £50 will be added to the buyer's invoice.
    Sale has ended