Wärtsilä Valves Ltd

Equipment Available as Surplus to Requirements of Ongoing Business. Please See the Sale Information Section for Any Additional Fees That May Be Applicable Upon Purchasing an Item.

Ended: 8th February 2018 15:00
  • site
    LOT 1
    HNK (2009) Model VTC-14/16 CNC Vertical Turning Centre / Vertical Boring Machine. With C axis & Live Spindle / Driven Tools. Fitted with Fanuc 18i-TB Control
    Table / 3 Jaw Power Chuck Dia. 1400mm. Max Dia Swing 1600mm. Max Height of Workpiece 1200mm. Max Table Load 8000kg. Max Table Speed 360 RPM. Milling Spindle Nose 50BT. S/No 09932
    Sale has ended
  • site
    LOT 2
    Dahlih (2006) Model DL-MCH-630 - 4 Axis Twin Pallet CNC Horizontal Machining Centre. With Fanuc 0i-MC Control.
    Rotary Pallet (B Axis) Area 630mm x 630mm. Spindle Nose 50 DV/Cat. Max Spindle Speed 6000RPM. With 60 Station Automatic Tool Changer. Renishaw Spindle Probe. S/No 3003020014
    Sale has ended
  • site
    LOT 3
    Doosan Model S670LM Turning Centre / CNC Lathe. With Fanuc 18-T Control
    Max Swing 850mm. Distance Between Centre 1850mm. With Driven Tools. 12 Position Turret. Tool Setter. 380mm Dia 3 Jaw Chuck. S/No LNS-1002
    Sale has ended
  • site
    LOT 4
    Doosan Model Z290SM Turning Centre / CNC Lathe. With Fanuc 18-T Control & Iemca VIP 70/15 Short CNC Bar Feed
    With Sub Spindle & Driven Tools. Max Swing 460mm. Distance Between Centre 600mm. With Upper & Lower 12 Position Turrets. Parts Catcher. 250mm 3 Jaw Chuck & 150mm 3 Jaw Chuck on Sub Spindle. S/No LXD-1039
    Sale has ended
  • site
    LOT 5
    Colchester Electronic Mascot CNC / Manual Straight Bed Centre Lathe with GE Fanuc 20-T Control
    Swing over Bed 433mm x 2000mm B.C. (17" x 80"). Swing Over Cross Slide 267mm. Note: Requires Attention - Control Fault. Inspection Recommended. S/No EC0019 - 1995
    Sale has ended
  • site
    LOT 6
    Fanuc Model Robocut Alpha - OC CNC Wire Cut EDM. With Fanuc 16-W Control
    Tank Area Approx 720mm x 550mm. S/No P9740C530-1997
    Sale has ended
  • site
    LOT 7
    Abus Electric Over Head Travelling Crane. With Floor Standing Gantry - (Rails, Bus Bar & Supports). SWL 10 Tonne.
    Single Beam Travelling Crane. With 10000kg Electric Wire Hoist, Pendant Control. Approx Dimensions: Span 16M x Length 47M x 6.9M High Uprights. Gantry with 16 off Uprights. Untested.
    Sale has ended
  • site
    LOT 8
    Abus Electric Over Head Travelling Crane. SWL 5 Tonne.
    Single Beam Travelling Crane. With 5000kg Electric Wire Hoist, Pendant Control. Approx Span: 16M. Untested. Traveling Beam Only.
    Sale has ended
  • site
    LOT 9
    Toyota Model 62-6FDF25 Diesel Powered Fork Lift Truck
    Rated Capacity 2500kg. With Solid Tyres. Frame /No E10930. Untested
    Sale has ended
  • site
    LOT 10
    Mitsubishi Model FG18K Gas Powered Fork Lift Truck with Side Shift
    Rated Capacity 1750kg. With Solid Tyres. S/No EF25A-85523. Untested
    Sale has ended
  • site
    LOT 11
    Vixen Jet Wash Type FL120 Front Loading Rotary Basket Type Parts Washing Machine
    Basket Size 1150mm Diameter x 260mm Deep. S/No 2108
    Sale has ended
  • site
    LOT 12
    Esab Model Warrior 500i CC/CV Mig Welding Machine with Warrior 304w Wire Feed
    With Cooler, Torch, Hoses & Cables. S/No 339-413-0949
    Sale has ended
  • site
    LOT 13
    Lorch Model S8 Pulse Mig Welding Machine with Wire Feed
    With Torch, Hoses & Cables. S/No 4019-2229-0002-5
    Sale has ended
  • site
    LOT 14
    EWM Hightec Type Triton 220AC/DC TGD Power Sinus Tig Welding Machine
    With Cooler, Torch, Hoses & Cables. S/No 0000077585
    Sale has ended
  • site
    LOT 15
    Thermal Dynamics Professional Model Cutmaster 40mm Portable Plasma Cutting Machine
    With Torch, Hoses & Cables. S/No US52255809
    Sale has ended
  • site
    LOT 16
    Kemper Type 8210004 Mobile Welding Fume Extractor with Articulated Arm Duct
    S/No 00127055601
    Sale has ended
  • site
    LOT 17
    Kemper Filter-Master Type 64103 Mobile Welding Fume Extractor with Articulated Arm Duct
    S/No 122465
    Sale has ended
  • site
    LOT 18
    Karcher Professional Model HDS 10/20-4M Mobile Pressure Washer
    With Hose & Lance.
    Sale has ended
  • site
    LOT 19
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 12.4M. Untested. Traveling Beam Only. Plant No OC8
    Sale has ended
  • site
    LOT 20
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 12.4M. Untested. Traveling Beam Only. Plant No OC9
    Sale has ended
  • site
    LOT 21
    Vixen JetAir Type VM36 Shot / Bead Blast Cabinet with Extractor & Recovery Unit
    Internal Dimensions Approx: 900mm x 750mm x 700mm High. S/No 5082
    Sale has ended
  • site
    LOT 22
    Viscontea Model 600 Horizontal Band Sawing Machine
    Capacity 600mm. Fitted with Custom Manufactured Hydraulic Clamping / Rotary Fixture.
    Sale has ended
  • site
    LOT 23
    Qualters & Smith Model 180A Sawmaster Automatic Horizontal Band Sawing Machine
    Sale has ended
  • site
    LOT 24
    Gate Giewont Model 3 Type FWA32M Horizontal / Universal Milling Machine with Motorised Overarm & Swivelling Vertical Milling Head
    Table Size 1600mm x 315mm. Horizontal Spindle 50 Int Taper - Speeds to 2014RPM. Vertical Head 40 Int Spindle - Speeds to 2000RPM. S/No 94/57
    Sale has ended
  • site
    LOT 25
    Colchester Mascot 1600 Gap Bed Centre Lathe - Imperial Machine.
    Swing over Bed 433mm Dia x 1000mm B.C. Swing in Gap 711mm. Swing over Cross Slide 267mm. With 305mm Dia 3 Jaw Chuck. S/No 7/0201/12170
    Sale has ended
  • site
    LOT 26
    Colchester Triumph 2000 Gap Bed Centre Lathe - Imperial Machine.
    Swing over Bed 390mm Dia x 750mm B.C. Swing in Gap 580mm. Swing over Cross Slide 240mm . S/No 6/0001/07413
    Sale has ended
  • site
    LOT 27
    Lunn Davis Model 15 Keyway Machine - Keyseater - Keyway Broaching Machine
    Table Area 787mm x 508mm. With Loose Tooling & Equipment. S/No LD138
    Sale has ended
  • site
    LOT 28
    Colchester Mascot 1600 Gap Bed Centre Lathe with 2 Axis DRO. - Imperial Machine.
    Swing over Bed 433mm Dia x 1500mm B.C. Swing in Gap 711mm. Swing over Cross Slide 267mm. With 305mm Dia 3 Jaw Chuck. 400mm 4 Jaw Chuck. S/No 7/0203/16147
    Sale has ended
  • site
    LOT 29
    Colchester Mascot 1600 Gap Bed Centre Lathe with 2 Axis DRO. - Imperial Machine.
    Swing over Bed 433mm Dia x 1000mm B.C. Swing in Gap 711mm. Swing over Cross Slide 267mm. With 305mm Dia 3 Jaw Chuck. 400mm 4 Jaw Chuck. S/No 7/0203/15970
    Sale has ended
  • site
    LOT 30
    Kitchen & Wade 4’0” E25 Radial Arm Drilling Machine
    Throat Distance Approx 1100mm. Spindle Nose No 4 Morse Taper. Spindle Speeds 40 to 2000 RPM. With Power Rise & Fall Arm. S/No 17672
    Sale has ended
  • site
    LOT 31
    Richmond Consul Radial Arm Drilling Machine with Rise & Fall Swivelling Table
    Throat Distance Approx 900mm. Spindle Nose No 4 Morse Taper. Spindle Speeds 50 to 2000 RPM. S/No 111-00113
    Sale has ended
  • site
    LOT 32
    Murex Model HD100 Powered Welding Positioner with Pendant Control.
    Table Diameter 1560mm. Max Load 5080kg. S/No 0714
    Sale has ended
  • Image not available
    Image not available
    site
    LOT 33
    Spare Lot
    Sale has ended
  • site
    LOT 34
    Boge (2011) Model SF 29-2 Packaged Air Compressor
    Max Pressure 8bar. S/No 5046146
    Sale has ended
  • site
    LOT 35
    CompAir BroomWade Model BTD450 Refrigerant Compressed Air Dryer
    Max Working Pressure 26bar. S/No BTD450/362
    Sale has ended
  • site
    LOT 36
    Kemper Type 8210004 Mobile Welding Fume Extractor with Articulated Arm Duct
    S/No 00127055501
    Sale has ended
  • site
    LOT 37
    Ecoair Model SDA 75A Packaged Air Compressor
    Max Pressure 7.5bar. S/No 2021792
    Sale has ended
  • site
    LOT 38
    Ecoair Model SDA 75A Packaged Air Compressor
    Max Pressure 7.5bar. S/No 2021789
    Sale has ended
  • site
    LOT 39
    Herbert Single Spindle Pillar Drilling Machine
    Spindle Nose No 3 Morse Taper. Speed 106 to 1455 RPM. Rise & Fall Table Area 390mm x 330mm. Throat Approx 190mm. With Power Feeds
    Sale has ended
  • site
    LOT 40
    Butler 10” (254mm) Slotting Machine
    Throat Approx 470mm. Rotary Table 610mm Diameter.
    Sale has ended
  • site
    LOT 41
    Scharmann Model FB85 Table Type Horizontal Boring, Facing & Milling Machine. With 3 Axis DRO
    Spindle Diameter 85mm. Approx Facing Head Dia 605mm. Rotary Table Area 1200mm x 1000mm. Spindle Nose Morse Taper. Note: Requires Attention - Drive Pulley Dismantled. S/No 6971
    Sale has ended
  • site
    LOT 42
    Drummond Electraulic 12 Ton Vertical Hydraulic Press
    Throat Approx 240mm. Table to Ram Face Approx 480mm. S/No ABN 12/513
    Sale has ended
  • site
    LOT 43
    Lumsden Type 30R Heavy Duty 4 Wheel Tool Grinding Machine
    S/No 30R/1175/10824
    Sale has ended
  • site
    LOT 44
    Cincinnati No 2TCG Tool & Cutter Grinding Machine with Motorised Tilting Wheel Head.
    With Motorised Work Head. Left & Right Centres. Dust Extractor. 4 Jaw Chuck. Collets plus Various Loose Tooling & Equipment as Photographed. S/No CT7301-2
    Sale has ended
  • site
    LOT 45
    Wild Barfield Model HW 1610 Electric Furnace.
    Max Temperature 1050 deg C. Approx Internal Dimensions 400mm x 750mm x 280mm High. S/No AM2130P
    Sale has ended
  • site
    LOT 46
    Fabricated Metal Parts Washing Tank with Electric Pump & Foot Pedal
    Wash Area Approx 1000mm x 400mm
    Sale has ended
  • site
    LOT 47
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 10M. Untested. Traveling Beam Only. Plant No OC7
    Sale has ended
  • site
    LOT 48
    Cobal Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 10M. Untested. Traveling Beam Only. Plant No OC6
    Sale has ended
  • site
    LOT 49
    Abus (2014) Electric Over Head Manual Travelling Beam, Hoist & Gantry. SWL 1 Tonne.
    Single Beam. With Abus 1000kg Electric Chain Hoist, Pendant Control (Hoist Only). Approx Dimensions: 4.9M Span x 5M x 3.1M High Uprights. Gantry with 4 off Uprights. Untested.
    Sale has ended
  • site
    LOT 50
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne with 10M Crane Rails - No Supports
    Single Beam Travelling Crane. With 2000kg Electric Chain Hoist, Pendant Control. Approx Span: 10M. Note: Crane Rails Bolted to Building Structure with 6 off Brackets. Untested. Plant No OC8
    Sale has ended
  • site
    LOT 51
    Kone Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 9.8M. Untested. Traveling Beam Only. Plant No DLS2030
    Sale has ended
  • site
    LOT 52
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Wire Hoist, Pendant Control. Approx Span: 9.8M. Untested. Traveling Beam Only. Plant No OC4
    Sale has ended
  • site
    LOT 53
    Abus Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Chain Hoist, Pendant Control. Approx Span: 9.8M. Untested. Traveling Beam Only. Plant No OC2
    Sale has ended
  • site
    LOT 54
    The Vaughan Crane Co Electric Over Head Travelling Crane. SWL 2 Tons.
    Twin Beam Travelling Crane. With Hitachi 2 Ton Electric Chain Hoist, Manual Chain & Pendant Control. Approx Span: 9.8M. Untested. Traveling Beam Only.
    Sale has ended
  • site
    LOT 55
    Cobal Electric Over Head Travelling Crane. SWL 2 Tonne.
    Single Beam Travelling Crane. With 2000kg Electric Chain Hoist, Pendant Control. Approx Span: 6.5M. Untested. Traveling Beam Only. Plant No OC1
    Sale has ended
  • site
    LOT 56
    Herbert Junior Hand / Lever Operated Surface Grinding Machine with Dust Extractor
    Table Area Approx 533mm x 154mm
    Sale has ended
  • site
    LOT 57
    Quantity of BT50 Spindle Tools Suitable for Lot 1
    Approx 32 off. Note: Back End Tool & Pull Stud Only - Does NOT Include Any Cutting Tools / Boring Bars Shown in Photographs.
    Sale has ended